Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Accessories | 16-21
Hydraulic System Accessories
A selection of hydraulic system components is available to tailor system operation to
the application.
Flow Control Valve
Use alone or in combination to balance adhesive flow from multiple applicators or from multiple hoses supplied
from the same melter.
P/N
Description
276060 Valve, use on applicator models with O-ring fittings
901134 Valve, use on applicator models with NPT fittings
Hydraulic System Pressure Gauge Kit
Use with any hot melt system. Install in series with hose to monitor system pressure.
P/N Description Comment
274428 In-line pressure gauge kit Includes gauge and hardware
274425 Gauge and protector Included in above kit
816084 Dead-end pressure gauge kit Fit to unused hose port on manifold
O-Rings
Use Kalrez® O-rings in applications where rapid O-ring failure occurs as a result of incompatibility between the
adhesive and standard Viton® O-rings. Use Viton O-rings in applications with operating temperatures up to
230 °C (450 °F).
Kalrez P/N Viton P/N O-Ring Size
709773 940101 0.250 ID X 0.375 OD
710742 940111 0.312 ID X 0.437 OD
709774 940121 0.375 ID X 0.500 OD
709775 940133 0.437 ID X 0.562 OD
711012 940112 0.437 ID X 0.625 OD
710021 N/A 0.500 ID X 0.688 OD
709776 940161 0.625 ID X 0.750 OD
709777 940181 0.750 ID X 0.875 OD
Kalrez and Viton are registered trademarks of E.I. DuPont de Nemours & Company.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com