Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

1-26 | Melters
ATS Retrofit Kit
External Flow Measuring and Process Control Device
Specifications
Item
Maximum system operating pressure
Specification
10 Mpa (1450 psi)
Instantaneous flow fate range 0.03–91 kg/hr (0.07–200.6 lb/hr) (assuming SG* = 1.0)
Displacement 1.0 cc/rev = 1 g/rev = 0.001 kg/rev = 0.0022 lb/rev (assuming SG* = 1.0)
Resolution 0.025 cc (25 mg) or (0.055 lb) (assuming SG* = 1.0)
Viscosity range
Output signals
ATS retrofit manifold electrical
requirements
ATS control box power supply electrical
requirements
600–10,000 cps
2 (Enabled Output and Alarm Output)
24 VDC sourcing (PNP)
25 mA each
Number of hose/applicator channels required: 1
Heater power: 350 W
200 mA (maximum)
24 VDC +/-10%
Manifold construction Aluminum, type 6061-T6
Gears: 86L20 steel, case-hardened
Flow meter construction
Gear shafts: Carbon steel, hardened and grounded (DIN 6325, M6)
Body: 316 stainless steel
Inductance: 1 mH (+/-10%)
Flow meter sensors
Resistance: 15 ohm (+/-10%)
Frequency: 60 kHz (+/-10%)
Temperature rating
204 °C (400 °F) maximum
Working temperature range
-5–50 °C (23–122 °F)
ATS control box IP rating
IPX4
*SG = specific gravity
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com