Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Liquid Adhesive Equipment | 15-47
Web Content
LS 373 Pneumatic Spray Applicator
Description
The pneumatic spray applicator features an innovative
nozzle design that delivers controlled spray patterns.
Individual adjustment screws allow control of air
pressure and adhesive volume.
• Dual air-spray capabilities provide wider spray patterns,
even with higher viscosity adhesives.
• Needle design permits use of a wide viscosity range.
• Integrated needle-stroke adjustment allows accurate
adhesive volume control.
• Quick-disconnect air fitting speeds installation.
• Narrow body profile installs easily on most parent
machinery.
• Use of nicke-plated steel resists corrosion from aggressive
liquid adhesives.
• Includes mounted solenoid.
• Includes 12.7 mm (0.5 in.) round mounting clamp for
easy installation.
Specifications
Item
Operating air pressure
Max. adhesive operating pressure
Cycle time, minimum
Solenoid Valve
Control voltage / power
Air connection
Adhesive connection
Minimum up-time (1)
Minimum down-time (1)
Weight
Dimensions
Width
Height
Depth
Times measured using (1) :
Adhesive viscosity
Control air pressure
Solenoid valve
Specification
4–6 bar (57–87 psi)
48 bar (57–87 psi)
6.5 ms
24 VDC/8.5 W
110 VAC
220 VAC
8 mm (0.314 in.)
1/8 BSP-1/2-20 UNF SS
6.5 ms
9 ms
1.1 kg (2.42 lb)
85 mm (3.346 in.)
190 mm (7.400 in.)
120 mm (4.724 in.)
700 mPa s
5 bar
24 VDC/8.5 W
(1)
Maximum achievable pattern width depends on adhesive
characteristics
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com