Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Web Content
Liquid Adhesive Equipment | 15-31
Pneumatic Bead Applicators
LV 227 Pneumatic Bead Applicator
Description
• Air-open, air-close actuation resists adhesive build-up.
• Use for non-contact applications.
• Zero-cavity needle design provides precise cut-off and
helps prevent adhesive curing on the nozzle.
• Integrated needle-stroke adjustment allows accurate
adhesive volume control.
• Quick-disconnect air fitting speeds installation.
• Narrow body profile installs easily on most parent
machinery.
• Stainless-steel needle resists corrosion from aggressive
liquid adhesives.
• Includes mounted 24 VDC or 110 VAC solenoid.
LV227 Pneumatic Bead Applicator
Specifications
Item
Specification
Maximum hydraulic pressure bar (psi) 48 (700)
Operating air pressure bar (psi) 4–6 (47–87)
Cycle time, minimum
Nozzle diameter range
Pattern coating width mm (in.)
13.5 ms
0.3–1.5 mm (0.012–0.059 in.)
n/a
Viscosity range maximum (cps) 3,500
Electrical service
230 VAC, 50/60 Hz, 24 VDC or
110 VAC solenoid
Weight kg (lb) 0.4 (0.88)
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com