Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

15-18 | Liquid Adhesive Equipment
WM 801 Series Electric Applicators
Specifications
Item
Maximum hydraulic pressure
Hydraulic hose connection
Minimum cycle time (1)
Nozzle diameter range (2)
Pattern plate sizes (2)(3)
Pattern plate hole diameters
Connection fitting
Electrical service (4)
Weight
Specification
48 bar (706 psi)
1/2-20 UNF
3.0 ms
Contact 0.3 to 1.0 mm (0.012 to 0.039 in.)
Non-contact 0.3 to 0.7 mm (0.012 to 0.028 in.)
45 x 34 mm (1.77 x 1.34 in.)
45 x 45 mm (1.77 x 1.77 in.)
45 x 60 mm (1.77 x 2.36 in.)
0.5 mm (0.020 in.)
0.7 mm (0.028 in.)
1.0 mm (0.039 in.)
1/2-20 UNF
Check Nordson electric applicator driver manual for proper setting
0.56 kg (1.22 lb)
(1)
Cycle time based on an adhesive viscosity of 900 centipoise. Actual cycle time will vary depending on adhesive viscosity and
characteristics.
(2)
Specify and purchase nozzles and pattern plates separately.
(3)
Pattern plates are a configurable product. Widths shown represent standard sizes only; custom sizes are available to meet specific
application parameters.
(4)
Use with Nordson applicator driver products.
Part Numbers
P/N Description Comment
7301316 Applicator, WM801-Q without nozzle
7301317 Applicator, WM801-S, + Slide Plate 34 mm with slide plate (no pattern plate included)
7302932 Applicator, WM801-S, + Slide Plate 45 mm with slide plate (no pattern plate included)
7300104 WM801-S, Upgrade Kit (retrofit) Upgrade WM801-Q or WM801-P to WM801-S
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com