Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

14-2 | Auxiliary Equipment
Nitrogen Generation System & Booster Pump
Features
Nitrogen Generation System
• Ability to produce and have available nitrogen gas as needed for production
• Continuous, in-line process so no need to shutdown production to replace cylinders
• Easy-to-use, including immediate start-up and shutdown
• Compact system allows placement as close to the application point as desired
• Easy installation with no electric requirement
• Very little maintenance required with no moving parts and filter replacement only every 4–6 months
• 80–90% lower cost than nitrogen gas provided in pressurized cylinders
• Eliminates the need for special storage/handling and appropriate training required to handle pressurized cylinders
• Produces 95–99.5% pure nitrogen
Nitrogen Booster Pump
• Ability to produce and have available nitrogen gas as needed for production
• Continuous, in-line process so no need to shutdown production to replace cylinders
• Easy-to-use, including immediate start-up and shutdown
• Compact system allows placement as close to the application point as desired
• Easy installation with no electric requirement
• Very little maintenance required with no moving parts and filter replacement only every 4–6 months
• 80–90% lower cost than nitrogen gas provided in pressurized cylinders
• Eliminates the need for special storage/handling and appropriate training required to handle pressurized cylinders
• Produces 95–99.5% pure nitrogen
Objectives
• Provide customers with a relatively safe, easy source of nitrogen gas to simplify use of Nordson foam technology and
tank melters for reactive adhesives/materials.
• Foster the use of nitrogen gas rather than other inert gases for foaming adhesives as nitrogen gas creates the “best
foam.” Nitrogen gas is truly inert/non-reactive with adhesives/materials; has no oxygen component that can cause char;
and produces a small and consistent bubble.
• Replace cumbersome, expensive nitrogen gas cylinders that some customers do not want to deal with. Cylinders
require special storage and handling; must be replenished; and are often too bulky to be placed near the point of
application.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com