Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Controls | 13-39
Applicator Driver Selection Chart
Part Numbers
Mounting
Configuration
e.dot+, e.dot
All Other Applicators
1–2 Channels 1–4 Channels 1–2 Channels 1–4 Channels 5–8 Channels
DIN Rail — OEM
Cabinet Mounting
EcoBead E Driver*
1129000
LogiComm OEM
Driver**
1079694
EcoBead E Driver*
1129000
LogiComm OEM
Driver**
1079694
LogiComm OEM
Driver**
1079694 (2X)
Standalone —
Connectors
EcoBead E Driver*
1129000
LogiComm Driver
4 CH Conn
1074653
EcoBead E Driver*
1129000
LogiComm Driver
4 CH Conn
1074653
LogiComm Driver
8 CH Conn
1074654
Standalone —
Terminal Blocks
(IP54)
LogiComm Driver
4 CH TB
1074651
LogiComm Driver
4 CH TB
1074651
LogiComm Driver
4 CH TB
1074651
LogiComm Driver
4 CH TB
1074651
LogiComm Driver
8 CH TB
1074652
*EcoBead E driver is pre-programmed for the E-400 applicator, but can also be used with other applicators. Contact your Nordson
representative for assistance.
**LogiComm OEM Driver is pre-programmed for the e.dot+ applicator. Use included programming kit to change for other applicators.
Applicator Driver Comparison Chart
Electrical
LogiComm OEM
Applicator Driver
LogiComm Applicator Driver EcoBead E Driver
Input voltage
Supply #1: 110–240 VAC
Supply #2: 20–28 VDC
100–240 VAC, 48–62 Hz 100–240 VAC, 50/60 Hz
Input current 3 A 3 A 3 A
Input trigger
18–30 VDC, PNP
Opto-isolated (NPN or PNP,
sourcing or sinking), 10–30 VDC
18–30 VDC
Spike duration 0.6–2.0 ms 0.1–12.7 ms 0.1–15 ms
Hold current 0.0–1.5 A 0–1.0 A 0.0–1.5 A
Pull-in current 0.0–3.0 A 0.1–3.1 A 0.0–3.0 A
Fault output contact
Potential-free contact rated at
0.25 A @ 24 VDC; opens on
output fault (open circuit, short
circuit, terminal)
1 form C potential-free contact,
fail safe design; contact rating
0.5 A @ 250 VAC
NPN
Enclosure
Enclosure rating
Dimensions
(W x H x D)
LogiComm OEM
Applicator Driver
IP20
LogiComm Applicator Driver
IPX4: Terminal block version
IP30: Connector version
EcoBead E Driver
78 mm x 105 mm x 73 mm 327 mm x 311 mm x 163 mm 140 mm x 109 mm x 46 mm
Mounting DIN Wall DIN or machine
Operating
temperature
IP30
0–50 °C 0–50 °C 0–50 °C
Continued...
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com