Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

13-14 | Controls
LogiComm Integrated Pattern Control
and Verification System
Specifications
Item
Specification
Maximum line speed m/min (ft/min) 1200 (3937)
Pattern accuracy mm (in.) ±0.25 (0.01)
Display type
Encoder resolution
Encoder frequency
Electrical service
Program memories
Encoders
Pattern channels
Applicator outputs
Applicator drivers
Universal applicator driver low voltage
Driver
Verification channels
Pressure outputs
Independent triggers
Parent machine I/O
Machine control outputs
15 in. XGA touch-screen
Up to 30 pulses/min
100 KHz maximum
Universal 80–256 VAC, 1-phase
Virtually unlimited (via flash memory card)
1 or 2 per system
4 or 8 per control module (up to 32/standard system)
4 or 8 per connectors per module
(one applicator connector per pattern channel)
80 W maximum per applicator driver (4 applicators) (160 W per module)
80 W per module
6 or 12 per control module (up to 48 sensors per standard system)
2 or 4 per control module (up to 16 run-up channels)
4 or 8 per control module (up to 32 per standard system)
Adaptable to PNP or NPN type
4 in, 4 out programmable
Ejector
Batch kicker
Delivery table
Part Numbers
A minimal LogiComm system includes one master and one XGA touch screen. Maximum system capacity
includes one master control module, three expansion modules, three XGA touch screens and one ethernet hub.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com