Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

13-8 | Controls
EcoBead Inspect
Pattern Generation and Verification
Specifications
Item
Maximum operating frequency
Setting resolution of on-time pulse
Supply voltage
Input signal voltage
Output signal voltage
Applicator capacity
Applicator connection
Sensor capacity
Input capacity
Output capacity
Enclosure protection class
Specification
150 Hz (9,000 cycles per minute)
1 ms (1 ms to 1 s, in 1 ms steps)
20–30 VDC
24 VDC nominal (spiked/boosted input signals are not supported)
24 VDC switched, matched to MiniBlue II SP solenoid
One pattern control input; one solenoid output
In-line connection using MiniBlue II connector
One EcoBead Inspect sensor
One 24 VDC alarm reset input
Two configurable NPN outputs
IP54
Approvals CE, FCC Part 15b, IEC 60825-1:2014
Operating temperature
5–60° C (40–140° F), 25–93% relative humidity
Part Numbers
P/N
Description
7306000 EcoBead Inspect pattern generator (complete kit)
7306001 EcoBead Inspect controller
7306002 EcoBead Inspect sensor head
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com