Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

13-2 | Controls
TruFlow Flex Flow Controller
Specifications
Item
Control modes
Number of flow channels 2
Product trigger inputs 2
Flow control outputs
Specification
Monitoring, closed loop (continous applications only)
0–10 VDC, 4-20 mA
Ambient temperature range 0–50° C (32–120° F)
Operating temperature range 40–230° C (100–446° F)
Temperature control stability ±1° C (2° F)
Temperature control sensor options
Input/output capability
Ingress protection rating
Electrical requirements
Nickel 120 Ohm RTD, platinum 100 Ohm RTD
4 inputs/3 outputs
IP54
Number of heating zones 0, 2, or 4
Maximum heating capacity
Weight
200/240 VAC, 50/60 Hz, single-phase
2800 W
Channel 1: 1200 W per channel/600 W per zone
Channel 2: 1600 W per channel/800 W per zone
20 kg (with heating channels), 9.5 kg (without heating channels)
TruFlow Meter Flow Range
Displacement
Flow Range*
1.8 cc/rev 0.5 cc/min to 4 L/min
4.2 cc/rev 10 cc/min to 15 L/min
13.5 cc/rev 25 cc/min to 45 L/min
38 cc/rev 75 cc/min to 105 L/min
133 cc/rev 250 cc/min to 240 L/min
*Application and adhesive dependent
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com