Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Melters | 1-11
ProBlue Flex Melter with BBconn Controls
4 , 7, and 10 kg
Melter Specifications (contd.)
Fill System
Item
Adhesive forms/shapes
Adhesive transfer maximum rate
Transfer hose length
Total air consumption (each feed)
Air conditioning operating air —
dynamic
Operating air — static
Inlet air connection
Dimensions (W x D x H)
Adhesive container capacity
Enclosure rating
Noise emissions
Specification
Pellets
Pastilles: Up to 12 mm (0.472 in. diameter)
Mini-slats: Up to 12 mm x 12 mm (0.472 in. x 0.472 in.)
275 kg (600 lb)/hour (dependent on adhesive type)
4 m (13 ft), 9 m (29.5 ft), or 18 m (59 ft)
17 CFM @ 3.4 bar to transfer 105.3 kg/hr (223.2 lb/hr) — with 4 m hose @ 4 m rise
22 CFM @ 4.1 bar to transfer 112.5 kg (248 lb/hr) — with 9 m hose @ 4 m rise
30 CFM @ 6.2 bar to transfer 90.7 kg/hr (200 lb/hr) — with 18 m hose @ 4 m rise
Minimum pressure: 2.75 bar (0.275 MPa or 40 psi)
Maximum pressure: 5.5 bar (0.55 MPa or 80 psi)
Maximum pressure: 6.9 bar (0.69 MPa or 100 psi)
¼ NPT female
¼ BSPP female
G¼ female
Single-feed adhesive container clearance: 480 x 554 x 917 mm (19 x 22 x 36 in.)
Single-feed open lid height clearance: 1471 mm (60 in.)
Multi-feed adhesive container clearance: 688 x 667 x 1656 mm (26 x 27 x 65 in.)
Multi-feed open lid height clearance: 1790 mm (71 in.)
Single-feed bin: 40 kg (88 lb) usable with grate; 64 kg (141 lb) usable without grate
Multi-feed bin: 110 kg (242 lb) usable with grate; 128 kg (282 lb) usable without grate
IP54
76 dBA
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com