Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

10-30 | Coating Heads
EB 60 Flex Edge Banding Slot Applicators
Part Numbers
EB 60 Flex Applicators
P/N
Description
7150056 Applicator, EB 60 Flex, LH, Ni120, MAN, 5–60 mm
7150086 Applicator, EB 60 Flex, RH, Ni120, MAN, 5–60 mm
7133515 Applicator, EB 60 Flex, LH, Ni120, DRV, 5–60 mm
7133354 Applicator, EB 60 Flex, RH, Ni120, DRV, 5–60 mm
LH = Left-handed applicator design
RH = Right-handed applicator design
MAN = Manual coating-width adjustment
DRV = Motor-driven coating-width adjustment
5–60 mm = Possible coating width (minimum 5 mm to maximum 60 mm)
Control Box
P/N
Description
7561646 Control box, edge banding without gateway
7157958 Control device, edge banding applicator
Control Module
P/N
Description
7183068 Control module, SB 60, 3.5 mm needle stroke, flange valve module/solenoid, tandem
Tandem = dual-needle seal technology
Coating Nozzles
P/N
Description
7133525 Coating nozzle, EB 60 Flex, left-hand , EB/right-hand SF, S, 0.5 mm slot opening (shim slot width)
7133351 Coating nozzle, EB 60 Flex, right-hand EB/left-hand SF, 0.5 mm slot opening (shim slot width)
EB = Edge Banding
SF = Strip-Feed
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com