Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

10-20 | Coating Heads
AltaSlot Applicators
AltaSlot-c and AltaSlot-i
Specifications
Item
Maximum intermittent cycles (1)
Operating temperature
Maximum application width
Maximum adhesive viscosity
Temperature sensors
Module actuation air pressure (2)
Electrical
Control voltage
Specification
Up to 4,000 cycles/min
200 °C (392 °F) maximum
Continuous: 700 mm (27.56 in.)
Intermittent: 350 mm (13.78 in.)
Continuous: 80,000 cps/mPAS
Intermittent: 10,000 cps/mPAS
Ni120, PT100
5–6 bar (72.5–87 psi)
230 VAC, 50/60 Hz, 1 phase
24 VDC
(1)
The number of cycles may vary depending on operating pressure and control air pressure, as well as adhesive viscosities.
(2)
Oil-free air must be used.
Dimensions
AltaSlot-c
AltaSlot-i
Applicator dimensions vary depending on configuration.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com