Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

10-18 | Coating Heads
TrueCoat HP Slot Applicators
Continuous Coating Applicators
Specifications
Item
Specification
Small Profile Medium Profile Large Profile
Applicator model
Applicator width 250–400 mm 550–1050 mm 1100–2300 mm
Coating width 50–350 mm 351–850 mm 851–2100 mm
Add-on weight:
1. Against web tension
2. Against back up roll
3. Against back up roll with rotating bar
Supported adhesive types
Adhesive viscosity
5–20 g/m 2 (gsm)
20–500 g/m 2 (gsm)
12–30 g/m 2 (gsm)
PSA / EVA / PO (Poly Olefin) / UV Acrylic (on request)
1000–50000 mPa.s (cps)
Number of filters (adhesive inlets) 1 1–3 2–6
Line speed
Operating air pressure
Maximum operating temperature
Electrical
20–300 m/min (65.62–984.24 ft/min)
4–6 bar (58–87 psi)
2000 °C (3920 °F)
230 VAC, 50/60 Hz
Temperature sensors (RTD) PT100 or NI120 PT100 PT100
Degree of protection
IP50
Part Numbers
For part number information, contact your Nordson representative.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com