Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Coating Heads | 10-11
TrueCoat FS-FL Slot Applicators
380mm /15 in.
For Flat Lamination
Dimensions
380mm / 15 in.
179mm / 7.1 in.
179mm / 7.1 in.
110mm / 4.3 in.
380mm /15 in.
110mm / 4.3 in.
200mm / 7.9 in.
Control panel (depth is 60 mm/2.4 in.)
380mm / 15 in.
Control box (depth is 210 mm/8.3 in.)
200mm / 7.9 in.
Applicator dimensions vary depending on TrueCoat FS-FL applicator variant.
Part Numbers
TrueCoat FS-FL Slot Applicator
The TrueCoat FS-FL slot applicator includes the applicator and both drives (1), the control box (2),
the control panel (3), and connection cables (4).
(1) Applicator and Drives
Material
Coating
Width (mm)
(2) Control Box (3) Control Panel (4) Cables
PUR 100–700
200–1000
P/N 7189171 — TC-FSPUR standard (1)
P/N 7157980
P/N 7186020 — TC-FSPUR grammage current (2) Control panel for
P/N 7186282 — TC-FSPUR grammage voltage (3) flat lamination
200–1400
EVA or PO 100–700 P/N 7157979 — TC-FS1400 EVA standard (1)
100–1000
P/N 7157978 — TC-FS1400 EVA fieldbus (4)
Control box for grammage control (contact
100–1400 Nordson)
(1)
Without grammage control software.
(2)
Includes grammage control: 4–20 mA line speed input and 0–10V signal output to supplying melter/pump.
(3)
Includes grammage control: 0–10V line speed input and 0–10V signal output to the supplying melter/pump.
(4)
Fieldbus CANopen communication (PROFINET available)
P/N 7150059
Control cable set
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com