Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

10-10 | Coating Heads
TrueCoat FS-FL Slot Applicators
For Flat Lamination
Specifications
Item
Nozzle slot size
Operating air pressure (1)
Maximum adhesive pressure (2)
Coating speed
Maximum operating temperature
Temperature sensors
Electrical
Degree of protection
Specification
0.4 mm
4–6 bar (58–87 psi)
30 bar (435 psi)
10–60 m/min (32.8–196.85 ft/min)
230 °C (446 °F)
Ni120
230 VAC, 50/60 Hz, 1 phase
IP50
(1)
Oil-free air must be used.
(2)
Maximum pressure for this application; 100 bar is the maximum the applicator can safely handle.
Item
Polyurethane (PUR)
Ethylene Vinyl Acetate (EVA)
Polyolefin (PO)
Application width 100–700 mm (3.94–27.56 in.) 100–700 mm (3.94–27.56 in.)
200–1000 mm (7.87–39.37 in.) 100–1000 mm (3.94–39.37 in.)
200–1400 mm (7.87–55.12 in.) 100–1400 mm (3.94–55.12 in.)
Coating weight 30–80 g/m 2 40–80 g/m 2 EVA
30–80 g/m 2 PO
Adhesive viscosity 10000–35000 mPa*s 10000–50000 mPa*s
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com