Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

10-2 | Coating Heads
Speed-Coat Slot Coating Heads
Specifications
Item
Operating speed (1)
Operating temperature
Application width (2)
Temperature sensors
Control type
Operating air pressure (3)
Electrical service
Control voltage
Supply current (control)
Specification
Up to 9,000 cycles/minute
200 °C (392 °F) maximum
Up to 500 mm/19.5 in.
Ni120 or Pt100, FeCuNi
Electro-pneumatic
0.5–0.6 MPa (72.5–87.0 psi)
230 VAC, 50/60 Hz
23.5–28 VDC
2.0 A per standard solenoid
(1)
Maximum number of cycles depends on operating and control air pressure, as well as adhesive viscosities.
(2)
Wider application widths are available upon request.
(3)
Oil-free air must be used.
Dimensions
185 mm/7.3 in.
145 mm/5.7 in.
L*
* Depends on application width
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com