Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Hand-Held Applicators | 9-21
Web Content
Series FP-200 Hand-Held Applicators
Description
Ergonomically designed hand-held applicators help
minimize physical stress and fatigue in manually
applying hot melt adhesives to horizontal substrates.
When combined with the appropriate tool-balance
devices, Series FP-200 hand-held applicators allow the
operator to maintain a neutral wrist position. Weightsupported
design and ergonomic configuration help
reduce worker fatigue and physical stress in benchtop
gluing applications such as automotive panels,
appliance panels and furniture.
Features
• FP-200 hand-held applicators for 2300, 3000 and PA-
2500 applicators include heat shields and are designed
to meet, CE, UL, and C-UL compliance requirements.
• Suspension package includes a mast, overhead swing
arm and tool balancer that bear the weight of the handheld
applicator.
• Hand-held applicator assembly easily moves left or right
and in or out on the swing arm relative to operator
position.
• Selection of modules and nozzles provides spiral spray
or bead extrusion to meet deposition requirements.
• For FP-200 hand-held applicators accommodating
2300, 3000 and PA-2500 melters, kits are available to
convert swirl hand-held applicator to extrusion and
extrusion hand-held applicator to swirl.
• Patented Controlled Fiberization hand-held applicators
permit exceptional control of spiral pattern density
and size, yielding narrow and wide pattern versatility
without overspray.
• Bead extrusion hand-held applicators are available in
standard and reduced cavity designs with a choice of
nozzle and orifice diameters.
• Trigger handle adjusts throughout a range of positions,
and auxiliary guide handle permits two-handed use for
further control. Handle position accommodates either
left or right-hand use.
• Light-touch trigger activates an air valve or microswitch
in hand-held applicator handle, providing instant
adhesive flow.
FP-200 Hand-Held Applicator Dispensing Swirl Pattern
• Patented multi-plane swivel provides angle movement
up to 2° from centerline to further reduce wrist stress.
• Compact body design optimizes pattern visibility and
maneuvering in difficult-to-reach areas.
• Modules are interchangeable for ease of cleaning and
replacement.
• Air-open, spring-close hand-held applicator design
includes long-life seals and provides superior cutoff,
pattern uniformity, and the ability to dispense a wide
range of hot melt adhesives and sealants.
• Precise RTD sensing controls hand-held applicator
temperature to within ±0.5.
• Quick-disconnect electrical plugs speed installation
and servicing
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com