Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

9-18 | Hand-Held Applicators
AD-31 Spray Hand-Held Applicators
Selection Chart
Melter Model
3000, 2300,
DuraBlue
Hand-Held
Applicator
P/N Hose Diameter Voltage Wattage
Model (1)(3)
AD-31 STR 101206 (2)
5/16 240 80
AD-31 STR-WP 137217 (2)
AD-31 SCR 101207
(1)
Requires air hose installation kit (P/N 324287); see “AD-31 Spray Hand-Held Applicator Accessories.”
(2)
Used with hoses having corrugated plastic covers.
(3)
All hand-held applicators have RTD type sensors.
AD-31 Spray Hand-Held Applicator Accessories
Accessory P/N Description Comment
Cordsets 104992 Hand-held applicator cordset, 2.4 m (8 ft) Cordsets required for AD-31 ST, STL and
104993 Hand-held applicator cordset, 2.4 m (8 ft)
SC hand-held applicators. (1) Order at least
the same length as hose.
104994 Hand-held applicator cordset, 2.4 m (8 ft)
105709 Hand-held applicator cordset, 2.4 m (8 ft)
Controller 107246 Standalone controller Order for AD-31 SC used w/drum
melters; or when no spare temperature
control channels are available on Series
2300, 3000 or 6000 applicators.
Kits 324287 Air hose installation kit Order for all units except Model 115/Hot
Shot.
(1)
When used with Series 2300, 3000 or 6000 applicators, the cordset can connect to a spare channel, if available. If no spare
temperature control channels are available, or when using an AD-31 SC hand applicator, use a standalone controller (P/N 107246) with
the appropriate cordset.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com