Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Non-Contact | 8-7
Non-Contact Adhesive Module Selection
Nordson CF-200 modules offer consistent performance
and long life in an economical package. These
pneumatically actuated modules are fully rebuildable
and compatible with twist-on disk or unibody style CF
nozzles.
• Modular design provides ease of operation and
maintenance for reduced downtime.
• Fine spray pattern cools before reaching substrate,
eliminating burn-through.
• Edge control to within 3 mm (1/8 in.) allows precise
adhesive placement without overspray.
NOTE: CF-200 modules are compatible with disk and unibody style
twist-on nozzles.
CF-200 Modules
Specifications
Item
Module width
Nozzle compatibility
Operating temperature
Working hydraulic pressure
Maximum hydraulic pressure
Maximum hydraulic flow
Actuation air pressure
Specification
22 mm
Disk and Unibody style twist-on CF Nozzles
70–205 °C (160–400 °F)
1.38–5.52 MPa (200–800 psi)
8.96 MPa (1300 psi)
110 g/min @10,000 cps, 14 g/m 2 @ 300 m/min
0.41 MPa (60 psi) recommended
CF Modules
NOTE: CF-200 modules are compatible with disk and unibody style twist-on nozzles.
P/N
Description
144906 Standard module
753166 Right angle module
860924 22 mm blank module
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com