Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

7-54 | Automatic Applicators
e.dot+ Electric Applicators
e.dot+ Applicator Specifications
Item
Service life
Response time
Maximum hydraulic pressure
Working hydraulic pressure
Working viscosity
Maximum viscosity
Electrical connections
Electrical requirements
Heating method
Integrated Saturn filter
Operating temperature
Specification
200 million cycles
1.8 ms*
100 bar (1,450 psi)
48 bar (700 psi)
1,000 cps
5,000 cps
Quick-disconnect
See applicator driver specifications
Cartridge heater
200 mesh
185 °C (365 °F)
Maximum 200 °C (392 °F)**
*Minimum on-time 0.4 ms viscosity dependent; use e.dot+ application guide
**Dependent on pattern; use e.dot+ application guide
Applicator Driver Specifications
NOTE: Refer to Controls for applicator driver part numbers.
Item
LogiComm Control
System
LogiComm OEM
Applicator Driver
LogiComm Applicator
Driver
EcoBead E
Applicator Driver
Capacity
Electrical service
4 or 8 channels per
board
100–240 VAC,
50/60 Hz
4 channels per board 4 or 8 channels per board 2 channels
110–230 VAC,
50/60 Hz
24 VDC
100–240 VAC,
50/60 Hz
110–264 VAC,
50/60 Hz
Input line fuses 3 Amps 2 Amps 3 Amps 3 Amps
Trigger source options
NPN or PNP
(24 VDC sink/source)
Enclosure rating IP30 IP20
24 VDC NPN or PNP 24 VDC
Terminal block version:
IPX4
Connector version: IP30
IP30
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com