Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

More documents

Recommendations

Info

7-38 | Automatic ApplicatorsSeries H-20 Hot Melt ApplicatorsSpecificationsItemOperating temperatureWorking hydraulic pressure MPa (psi)Specification230 °C (450 °F) maximum10.34 (1,500) maximumOperating air pressure (1) MPa (psi) 0.28–0.48 (40–70)Operating speedNozzle series (2)Electrical serviceExceeds 4,200 cycles/minuteSingle and multi-orifice with fixed and optionalengagements; 232XXX, 231XXX and 220XXX domed,right-angle adapter with 236XXX series240 VAC, 50/60 Hz200 VAC, 50/60 Hz(1)Recommended range. Dry, regulated, non-lubricated air requiredfor consistent applicator operation. Module performance anddurability will be negatively affected if operated outside therecommended range. Volumetric air requirements will vary withapplicator configuration and application.(2)Specify and order nozzles separately.NOTE: Use H-20 applicators for high-flow, intermittent applications.They are excellent for dispensing high viscosity and filledmaterials. H-20 cartridge design provides approximately fourtimes the life of previous design when used with packaginggradehot melts.Selection ChartsH-20 RTD ApplicatorsModel P/N Voltage CommentsH-20T274702 240 2300-style cordsetH-20T-L276096 200H-20 LBS-T - 5/16 in. Hose 120664 240H-20 LBS-T - 5/8 in. Hose 136537H-20-T Micro-Adjust Needle 274728H-20-1 Filtered Body 815138H-20-TW 276778 Water-wash, 2300-style cordsetH-20 LBS - 5/8 in. Hose 276954 Series 5000 drum melters, drum melter rectangularconnection (unit end)To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Adhesive & Sealants Equipment GuideAutomatic Applicators | 7-39Series H-20 Hot Melt ApplicatorsH-20 Thermostat ApplicatorModel P/N Voltage Temperature °C (°F) CommentsH-20A (HM IV) 153010273385498661240240200175 (350)190 (375)190 (375)H-20A, 80A (Series 2000) 272716 240 175 (350) QD plugH-20B 270082153045240200Standard cordset175 (350) Circulating standardcordsetH-20C 153130 120H-20E 240683 240 Circulating Model VIIH-20 LBS - 5/16 in. Hose 272269 Standard cordsetH-20 LBS - 5/8 in. Hose 272270H-20 Micro-Adjust Needle 272261H-20W (HM IV) 241969 Water-washH-20-1 Filtered (HM IV) 815162 Standard cordsetH-20 Filtered (Series 2000) 815134 QD plugTo place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Page 1 and 2:
Adhesives & Sealants Guide2020-2021
Page 3:
PurposeUsing the GuideThe Adhesives
Page 6 and 7:
ii | Table of ContentsTable of Cont
Page 8 and 9:
iv | Table of ContentsTable of Cont
Page 10 and 11:
vi | Table of ContentsTable of Cont
Page 12 and 13:
viii | Table of ContentsTable of Co
Page 14 and 15:
x | Table of ContentsTable of Conte
Page 16 and 17:
xii | Table of ContentsTable of Con
Page 18 and 19:
xiv | Table of ContentsTable of Con
Page 20 and 21:
xvi | Table of ContentsTable of Con
Page 22 and 23:
xviii | Table of ContentsTable of C
Page 24 and 25:
xx | Table of ContentsTable of Cont
Page 26 and 27:
xxii | Table of ContentsTable of Co
Page 28 and 29:
xxiv | Table of ContentsTable of Co
Page 30 and 31:
1-2 | MeltersProBlue Flex Melter wi
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
1-10 | MeltersProBlue Flex Melter w
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
1-22 | MeltersProBlue Series Melter
Page 52 and 53:
1-24 | MeltersProBlue Series Melter
Page 54 and 55:
1-26 | MeltersATS Retrofit KitExter
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
1-34 | MeltersFulfill RetrofitAdhes
Page 64 and 65:
1-36 | MeltersFulfill RetrofitAdhes
Page 66 and 67:
1-38 | MeltersAltaBlue TT Adhesive
Page 68 and 69:
1-40 | MeltersAltaBlue TT Adhesive
Page 70 and 71:
1-42 | MeltersAltaBlue Touch Series
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
1-48 | MeltersDuraBlue L Series Adh
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
1-54 | MeltersDuraBlue Large Capaci
Page 84 and 85:
1-56 | MeltersDuraBlue Large Capaci
Page 86 and 87:
1-58 | MeltersVersaBlue Plus Series
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
1-64 | MeltersVersaBlue Adhesive Me
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
1-70 | MeltersVersaBlue N Adhesive
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
1-76 | MeltersVersaBlue XN and XC S
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
1-86 | MeltersVersaBlue N, XN, XCAd
Page 116 and 117:
1-88 | MeltersEZ Melt Series Adhesi
Page 118 and 119:
1-90 | MeltersEZ Melt Series Adhesi
Page 120 and 121:
2-2 | Foam SystemsSureFoam Dispensi
Page 122 and 123:
2-4 | Foam SystemsUltra FoamMix Pro
Page 124 and 125:
2-6 | Foam SystemsUltra FoamMix Pro
Page 126 and 127:
2-8 | Foam SystemsUltra FoamMix EXF
Page 128 and 129:
~20102-10 | Foam SystemsUltra FoamM
Page 130 and 131:
2-12 | Foam SystemsUltra FoamMix EX
Page 132 and 133:
2-14 | Foam SystemsUltra FoamMix PH
Page 134 and 135:
2-16 | Foam SystemsUltra FoamMix PH
Page 136 and 137:
2-18 | Foam SystemsFoamMelt Process
Page 138 and 139:
2-20 | Foam SystemsFoamMelt Process
Page 140 and 141:
3-2 | Bulk MeltersVersaDrum200-lite
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
3-8 | Bulk MeltersVersaPail20-liter
Page 148 and 149:
3-10 | Bulk MeltersVersaPail20-lite
Page 150 and 151:
3-12 | Bulk MeltersVersaPail20-lite
Page 152 and 153:
3-14 | Bulk MeltersDuraDrum Bulk Me
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
3-20 | Bulk MeltersDuraPail Bulk Me
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
4-2 | PUR MeltersPURBlue 4 Adhesive
Page 166 and 167:
4-4 | PUR MeltersPURBlue 4 Adhesive
Page 168 and 169:
4-6 | PUR MeltersVersaPUR Slug Melt
Page 170 and 171:
4-8 | PUR MeltersVersaPUR Slug Melt
Page 172 and 173:
4-10 | PUR MeltersVersaPUR Slug Mel
Page 174 and 175:
4-12 | PUR MeltersVersaPUR Tank Mel
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
4-18 | PUR MeltersMiniPUR PlusPolyu
Page 182 and 183:
4-20 | PUR MeltersMiniPUR PlusPolyu
Page 184 and 185:
5-2 | Automated Dispensing SystemsU
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
5-10 | Automated Dispensing Systems
Page 194 and 195: 5-12 | Automated Dispensing Systems
Page 202 and 203: 6-2 | Extruder SystemsEX Extruder S
Page 204 and 205: 6-4 | Extruder SystemsEEX Extruder
Page 206 and 207: 6-6 | Extruder SystemsEEX Extruder
Page 208 and 209: 7-2 | Automatic ApplicatorsBest Cho
Page 216 and 217: 7-10 | Automatic ApplicatorsSolidBl
Page 218 and 219: 7-12 | Automatic ApplicatorsSolidBl
Page 220 and 221: 7-14 | Automatic ApplicatorsSureBea
Page 222 and 223: 7-16 | Automatic ApplicatorsSureBea
Page 224 and 225: 7-18 | Automatic ApplicatorsMiniBlu
Page 240 and 241: 7-34 | Automatic ApplicatorsEcoBead
Page 242 and 243: Adhesive & Sealants Equipment Guide
Page 246 and 247: 7-40 | Automatic ApplicatorsSeries
Page 248 and 249: 7-48 | Automatic ApplicatorsAG-900+
Page 254 and 255: 7-54 | Automatic Applicatorse.dot+
Page 256 and 257: 7-56 | Automatic Applicatorse.dot+
Page 258 and 259: 7-58 | Automatic ApplicatorsE-400BR
Page 260 and 261: 7-60 | Automatic ApplicatorsE-400BR
Page 266 and 267: 7-66 | Automatic ApplicatorsSureSea
Page 268 and 269: 7-68 | Automatic ApplicatorsSureSea
Page 270 and 271: 8-2 | Non-ContactUniversal Applicat
Page 272 and 273: 8-4 | Non-ContactAltaSpray Plus App
Page 274 and 275: 8-6 | Non-ContactAltaSpray Plus App
Page 276 and 277: 8-8 | Non-ContactNon-Contact Adhesi
Page 278 and 279: 8-10 | Non-ContactNon-Contact Adhes
Page 280 and 281: 8-12 | Non-ContactNon-Contact Adhes
Page 282 and 283: 8-14 | Non-ContactSpray NozzlesCont
Page 284 and 285: 8-16 | Non-ContactSpray NozzlesCont
Page 286 and 287: 8-18 | Non-ContactSpray NozzlesUniv
Page 288 and 289: 8-20 | Non-ContactSpray NozzlesSumm
Page 290 and 291: 8-22 | Non-ContactSpray NozzlesSign
Page 292 and 293: 8-24 | Non-ContactSpray NozzlesSign
Page 294 and 295:
8-26 | Non-ContactSpray NozzlesSure
Page 296 and 297:
8-28 | Non-ContactSpray NozzlesComp
Page 298 and 299:
8-30 | Non-ContactProcess Air Contr
Page 300 and 301:
9-2 | Hand-Held ApplicatorsSeries A
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
9-10 | Hand-Held ApplicatorsSeries
Page 310 and 311:
9-12 | Hand-Held ApplicatorsAD-31 S
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
9-20 | Hand-Held ApplicatorsSelect
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
10-2 | Coating HeadsSpeed-Coat Slot
Page 330 and 331:
10-4 | Coating HeadsSpeed-Coat Slot
Page 332 and 333:
10-6 | Coating HeadsTrueCoat Slot A
Page 334 and 335:
10-8 | Coating HeadsTrueCoat Slot A
Page 336 and 337:
10-10 | Coating HeadsTrueCoat FS-FL
Page 338 and 339:
10-12 | Coating HeadsTrueCoat FS-FL
Page 340 and 341:
10-14 | Coating HeadsTrueCoat FS-PW
Page 342 and 343:
10-16 | Coating HeadsTrueCoat FS-PW
Page 344 and 345:
10-18 | Coating HeadsTrueCoat HP Sl
Page 346 and 347:
10-20 | Coating HeadsAltaSlot Appli
Page 348 and 349:
10-22 | Coating HeadsAltaSlot Appli
Page 350 and 351:
10-24 | Coating HeadsEZ Coat Slot A
Page 352 and 353:
10-26 | Coating HeadsEZ Coat Slot A
Page 354 and 355:
10-28 | Coating HeadsEB 60 Flex Edg
Page 356 and 357:
10-30 | Coating HeadsEB 60 Flex Edg
Page 358 and 359:
10-32 | Coating HeadsEP 48 PRO Book
Page 360 and 361:
10-34 | Coating HeadsEP 48 PRO Book
Page 362 and 363:
11-2 | NozzlesPrecision Bead Nozzle
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
11-10 | NozzlesPrecision Bead Nozzl
Page 372 and 373:
11-12 | NozzlesSpecialty NozzlesNoz
Page 374 and 375:
11-14 | NozzlesSpecialty NozzlesBut
Page 376 and 377:
11-16 | NozzlesSpecialty NozzlesThi
Page 378 and 379:
11-18 | NozzlesNozzle AccessoriesTh
Page 380 and 381:
11-20 | NozzlesPattern Width Graphs
Page 382 and 383:
12-2 | HosesAdvanced Technology Hot
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
12-10 | HosesAdvanced Technology Ho
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
12-20 | HosesPureFlow Hot Melt Hose
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
13-2 | ControlsTruFlow Flex Flow Co
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
13-8 | ControlsEcoBead InspectPatte
Page 414 and 415:
13-10 | ControlsConcert Series Cont
Page 416 and 417:
13-12 | ControlsConcert Series Cont
Page 418 and 419:
13-14 | ControlsLogiComm Integrated
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
13-26 | ControlsSpectra 30 Control
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
13-34 | ControlsLA 404-2 Pattern Co
Page 440 and 441:
13-36 | ControlsLA 404-2 Pattern Co
Page 442 and 443:
13-38 | ControlsSeal Sentry Series
Page 444 and 445:
13-40 | ControlsApplicator Driver S
Page 446 and 447:
13-42 | ControlsEcoBead E Applicato
Page 448 and 449:
13-44 | ControlsLogiComm Applicator
Page 450 and 451:
13-46 | ControlsLogiComm Applicator
Page 452 and 453:
13-48 | ControlsLogiComm OEM Applic
Page 454 and 455:
13-50 | ControlsLogiComm OEM Applic
Page 456 and 457:
14-2 | Auxiliary EquipmentNitrogen
Page 458 and 459:
14-4 | Auxiliary EquipmentNitrogen
Page 460 and 461:
14-6 | Auxiliary EquipmentProMeter
Page 462 and 463:
14-8 | Auxiliary EquipmentProMeter
Page 464 and 465:
14-10 | Auxiliary EquipmentVDK Midi
Page 466 and 467:
14-12 | Auxiliary EquipmentVDK Mete
Page 468 and 469:
14-14 | Auxiliary EquipmentPS Meter
Page 470 and 471:
14-16 | Auxiliary EquipmentPS Meter
Page 472 and 473:
15-2 | Liquid Adhesive EquipmentLA
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
15-12 | Liquid Adhesive EquipmentPr
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
15-18 | Liquid Adhesive EquipmentWM
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
15-32 | Liquid Adhesive EquipmentPn
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
15-40 | Liquid Adhesive EquipmentLi
Page 512 and 513:
15-42 | Liquid Adhesive EquipmentLi
Page 514 and 515:
Page 516 and 517:
15-46 | Liquid Adhesive EquipmentPa
Page 518 and 519:
15-48 | Liquid Adhesive EquipmentLS
Page 520 and 521:
15-50 | Liquid Adhesive EquipmentLS
Page 522 and 523:
15-52 | Liquid Adhesive EquipmentHi
Page 524 and 525:
16-2 | AccessoriesIn-Line FiltersPa
Page 526 and 527:
16-4 | AccessoriesIn-Line FiltersHe
Page 528 and 529:
16-6 | AccessoriesIn-Line FiltersTh
Page 530 and 531:
16-8 | AccessoriesSolenoid ValvesSa
Page 532 and 533:
16-10 | AccessoriesSolenoid ValvesS
Page 534 and 535:
16-12 | AccessoriesSolenoid ValvesS
Page 536 and 537:
16-14 | AccessoriesFittings and Con
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
16-22 | AccessoriesHydraulic System
Page 546 and 547:
16-24 | AccessoriesMulti-Service De
Page 548 and 549:
17-2 | Technical DataConversion For
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556:
17-10 | Technical DataConversion Fo
show all

Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Create successful ePaper yourself

Delete template?

Save as template?