Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Automatic Applicators | 7-36
PatternPro Variable Pitch
Dispensing Applicator
Specifications
Item
PatternPro Applicator with
SureBead S Module
205 °C (400 °F) maximum
PatternPro Applicator with
SolidBlue S Module
PatternPro Applicator with
MiniBlue II Module
Operating temperature
Operating air pressure 2.8–5.5 bar (40–80 psi) 3.4–5.5 bar (50–80 psi) 3.4–5.5 bar (50–80 psi)
Operating hydraulic pressure 103 bar (1500 psi) maximum
Nozzles
Solenoid valves
Electrical service
Standard (single and multiorifice)
and right angle
Standard (single and multiorifice)
and right angle
Nordson 24 VDC high-temperature solenoids recommended
240 VAC, 50/60 Hz; 200 VAC, 50/60Hz optional
Standard and reduced cavity
Module Adjustment Range
Dimensions
100 mm (3.9 in.)
40 mm (1.6 in.)
26 mm(1.0 in.)
52.2 mm (2.1 in.)
40.7 mm (1.6 in.)
24.2 mm (1.0 in.)
69 mm (2.7 in.)
84.7 mm (3.3 in.)
52 mm (2.0 in.)
22 mm (0.9 in.)
65 mm (2.6 in.)
55 mm (2.2 in.)
12.7 mm
(0.5 in.)
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com