Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Automatic Applicators | 7-19
MiniBlue II Applicator
Box
7
Box
8
Description
Top Service
Cordset Position
Left Side (configurable applicators only)
Right Side (configurable applicators only)
Left Back (configurable applicators only)
Right Back (configurable applicators only)
Description
SP (Saturn Platinum)
Solenoid Valve Type*
SD** MiniMac, Line Speeds, 90 m/min
(295 ft/min)
SG (Saturn) 24 VDC, Rev. Function
Code
TS
LS
RS
LB
RB
Code
*If the production line speed is 90 m/min (295 ft/min) or less, any
solenoid valves may be used. If the production line speed is greater
than 90 m/min (295 ft/min), only SP solenoid valves may be used.
**SD solenoid valves may not be used in common air applicator
configurations.
SP
SD
SG
Box
9
Description
50-Mesh, Straight
50-Mesh, 45° Angle
50-Mesh, 90° Angle
100-Mesh, Straight
100-Mesh, 45° Angle
100-Mesh, 90° Angle
200-Mesh, Straight
200-Mesh, 45° Angle
200-Mesh, 90° Angle
Saturn Inline Filters*
Code
E0
E4
E9
F0
F4
F9
G0
G4
G9
*On slim single-module applicators, the hose connector is
located just above the integrated filter. On single- or multi-module
configurable applicators, the filter is in line with the hose connector.
Box
10
Number of Hydraulic Ports
Description
Code
One hose port centered on back. 1
One hose port on each end and one
centered on back.
3
One hose port on each end and three on
back (one in the center and one at each end) 5
Box
11
Cover
Description
Code
No Cover 000
Soft Cover 010
Box
12
Manifold Style
Description
Code
Standard MiniBlue 000
Mounts in same location as Best Choice
air-close applicator
BCA
Mounts in same location as Best Choice
spring-close applicator
BCS
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com