Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Automatic Applicators | 7-7
Best Choice Configurable Applicators
Module Selection Chart (contd)
Applicator Type Features Application/Usage
SolidBlue S(SLBS)
• SolidBlue S standard module,
spring-tension adjustable (not strokeadjustable)
• Air-open, spring-close (AO/SC)
operation
• Accommodates Saturn single-orifice
and right-angle nozzles
SolidBlue S applicators provide longer life
than ClassicBlue applicators and deliver
exceptional adhesive cut-off/minimumdrip
operation for medium- to high-speed
applications.
SolidBlue A
(SLBA)
• SolidBlue A standard module, nonadjustable
• Air-open, air-close (AO/AC) operation
• Factory installed Saturn solenoid
valve
• Accommodates Saturn single-orifice
and right-angle nozzles
SolidBlue A applicators provide better
cutoff than SolidBlue S applicators
(because of the air-open, air-close
operation), provide extended service
life beyond ClassicBlue applicators,
and deliver exceptional accuracy for
demanding applications. SolidBlue A
applicators are recommended for use with
adhesives that have a viscosity greater
than 1,250 cps and cycle rates below
15 ms.
SureBead S
(SURS)
SureBead A
(SURA)
• High quality patterns with virtually
clog-free operation, even when
using “difficult to machine” low and
medium viscosity adhesives
• Maximum bead deposition capability
• Air-open, spring-close (SureBead S)
or air-open, air-close (SureBead A)
operation
• Colored ring on the removable nozzle
easily identifies orifice size
• Nozzles are interchangeable -
change orifice sizes without removing
the module from the applicator
• Nozzle tip is maintained resulting
in cleanly applied beads and better
product seals
SureBead modular hot melt applicators
are designed for easy flushing by removing
the nozzle from the module. Nozzles used
with a SureBead applicator are designed
to perform similar in function to reduced
cavity and zero cavity nozzles. SureBead
applicators are designed to dispense
packaging grade adhesives.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com