Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

7-2 | Automatic Applicators
Best Choice Configurable Applicators
Best Choice Applicator Specifications
Specification
Item
ClassicBlue (all),
SureBead/
SolidBlue S
SolidBlue A
SureBead A
Note
Operating hydraulic pressure
Operating air pressure
Operating speed
Electrical service
Operating temperature
103 bar (1,500 psi) maximum
2.8–4.8 bar
(40–70 psi)
Exceeds 3,500 cycles per minute
3.1–5.5 bar (45–80 psi) A
240 VAC, 50/60 Hz
200 VAC, 50/60 Hz optional (for low-voltage areas)
204 °C (400 °F) maximum
NOTE A: Recommended range. Dry, regulated, unlubricated air required for applicator operation.
Best Choice Applicator Configuration Code
The Best Choice configurator will help you select the applicator best suited to your application. Contact your
Nordson representative to obtain the configurator program. Below is a typical configuration code listing and a
table that interprets the code. When a configured applicator is ordered, Nordson assigns a unique identifier code
to the assembly, and that number is stamped onto the applicator identifier plate. The identifier code can then be
used to order new configured applicators, forgoing the configuration process.
Applicator
Model
Module
Type
Number of
Modules
Voltage
Air Type
Module
Spacing
Cordset
Cordset
Position
Solenoid
Saturn
In-line
Filters
Number of
Hydraulic
Ports
SURS STD 04 A CA 022 T LB 3A0A E9 3
1 2 3 4 5 6 7 8 9 10 11
Box
1
Applicator Model
Box
2
Module Type
Description
Code
Description
Code
ClassicBlue Reduced Cavity
CBRC
Standard
STD
ClassicBlue Zero Cavity
CBZC
Right Angle (Classic Blue Only)
RA
ClassicBlue Zero Cavity Extended
CBZE
Zero Cavity
ZC
ClassicBlue Right Angle
CBRA
Reduced Cavity
RC
SureBead S (air-open-spring-close) (AO/SC)
SURS
Zero Cavity Extended
ZE
SureBead A (air-open-air-close) (AO/AC)
SURA
SolidBlue S (AO/SC)
SLBS
SolidBlue A (AO/AC)
SLBA
NOTE: Solid Blue S replaces Classic Blue Standard.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com