Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Web Content
Extruder Systems | 6-3
EEX Extruder Systems
EEX Extruder Series
While featuring the same general advantages and benefits in
processing demanding adhesives, the EEX series of extruders
is a more simple, standardized and configurable system.
Features
• Microprocessor-controlled, multi-channel temperature control
featuring staged heating.
• Easy installation and operation.
• Fault diagnostic program for all temperature cycles.
• Start up delay with under- / over-temperature check for all
heating zones.
• Standard pressure control, optional pump station with variable
AC drives for metering applications.
• Water cooled draw-in zone, to be supplied by cooling circuity
from customer or optional cooling device.
• Cylinder and screw manufactured from tempered nitrified steel
providing a extremely long lifetime.
• ChemCoat® coated conical feeding hopper provide safe
material supply.
ChemCoat is a registered trademark of Impreglon GmbH.
EEX Extruder Series
Specifications
Item
Specification
EEX 10 EEX 40 EEX 100 EEX 200
Rated throughput kg/hr (lb/hr) (1) 10 (22) 40 (88) 100 (220) 200 (440)
Hopper volume L (in. 3 ) 15 (915) 30 (1830) 75 (4576) 150 (9153)
Rated power of main drive kW 2.2 5.5 11 22
Max. no. of gear pumps
(recirculating pumps optional)
2 4 4 4
Capacity per pump L/h (lb/hr) 10–40 (22–88) 10–40 (22–88) 10–40 (22–88)
40–160 (88–352)
(max. 2 pumps)
Max. operating temp. °C (°F) (2) 230 (446)
Max. adhesive pressure bar (psi) 100 (1450)
Temperature sensors
Ni120 (3) / PT100
Hose/applicator connections 1–5 1–5 1–5 1–4
(1)
Maximum output rate depends on adhesive; indication is based on common EVA.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
10–40 (22–88)
40–160 (88–352)
(max. 2 pumps)
(2)
Operating Temperature depends on adhesive and auxiliary equipment, extruder without auxiliary equipment may be suitable up to
260/496.
(3)
Ni120 for maximum 180 °C.