Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

6-2 | Extruder Systems
EX Extruder Systems
Specifications
Item
Melt rate (1)
Operating temperature range
Hydraulic pressure
Electrical connection
Control system
Pump station (2)
Temperature sensors
Heated zones
Description
3–250 kg/hr (7–551 lb/hr)
20–250 °C (68–482 °F)
0–100 bar (0–1450 psi)
3 x 400V +N +PE/50–60 Hz (Trafo optional)
Siemens S7 with touch panel (5.7 in. or 10.4 in.)
Pump stations are equipped with high-precision metering pumps for the most demanding
applications
PT100, Ni120
Extruder, hose, applicator (additional heating zones optional)
(1)
Screw geometry is specifically optimized for the required throughput and material.
(2)
Pump stations can be flanged to extruder output or alternatively as “satellite” version with hose between extruder and pump station.
Siemens is a registered trademark of Siemens AG.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com