Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

4-18 | PUR Melters
MiniPUR Plus
Polyurethane Melter System
Specifications
Item
Type of system
Specification
Tank with gerotor pump
Holding capacity 4 L (244 in 3 )
3.9 kg (8.6 lb)
Throughput (per hour) (1)
Melt rate (per hour) (1)
Maximum pump rate (per hour) (1)
6.3 kg (13.9 lb)
4 kg (8.8 lb)
Number of hoses/applicators (per hour) (2) Up to 2
Maximum working hydraulic pressure
Operating temperature range
Ambient temperature range
Temperature control stability
Gas pressure for nitrogen blanket
Electrical service (3)
Maximum system power capacity
@ 240 VAC
Approx. melter weight (empty)
Melter dimensions
Width
Height
Depth
35 kg (77 lb) or 50 kg (110 lb)
75 bar (1100 psi)
40–180 °C (100–356 °F)
0–50 °C (32–122 °F)
±0.5 °C (1 °F)
0.2 bar (29 psi)
120 VAC single phase 60 Hz
200–240 VAC single phase 50/60 Hz
3355 watts
43 kg (95 lbs)
334 mm (13.1 in.)
560 mm (22.04 in.)
652 mm (25.66 in.)
(1)
Actual rates will vary depending on adhesive type, application parameters and input voltage.
(2)
Values shown for melter @ 60 Hz.
(3)
Permitted deviation from rated line voltage is ±10%.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com