Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

4-8 | PUR Melters
VersaPUR Slug Melters
Specifications
Item
Type of system
Electrical service (1)
Slug diameter
Temperature sensor
Ambient temperature
Operating temperature
Approx. weight (2)
Input/output capability std.
Degree of protection
Specification
Positive-displacement spur gear pump
200 VAC 3-phase 50/60 Hz
230 VAC 3-phase 50/60 Hz
400 VAC 3-phase Y 50/60 Hz
400 VAC 3-phase 50/60 Hz
480 VAC 3-phase 50/60 Hz
280 mm (11 in.)
286 mm (11.26 in.)
Ni120
10–40 °C (50–104 °F)
40–230 °C (104–446 °F)
280 kg (617 lbs)
6 inputs, 6 outputs
IP54
(1)
Permitted deviation from rated line voltage is ±10%.
(2)
Weight depends on melter configuration.
Options
Options
Pump sizes
Hose/applicator pairs
Thermostats
Flow control
Light tower
Host communication
Key-to-Line per pump
Configuration
SN0030, SN0046, SN0062, SN0093, SN0186, SN0371, SN0773, SN1710
2, 4 or 6 hose/applicator pair (4, 8 or 12 external channels)
150°C (300°F), 180°C (350°F), or 200°C (390°F)
Automatic pressure control
Manual pneumatic pressure control
Flow control bypass
IPI w/output pressure control per drive
Standard manual pressure control valve
Yes
PROFIBUS-DP, ControlNet, Ethernet/IP, PROFINET IO
Yes
PROFIBUS and PROFINET are registerd trademarks of PROFIBUS & PROFINET International.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com