Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

4-2 | PUR Melters
PURBlue 4 Adhesive Melters
Specifications
Item
Type of system
Foil bag diameter
Melt rate (per hour)
Holding capacity
Maximum pump rate
Maximum working hydraulic pressure
Temperature sensor
Operating temperature range
Ambient temperature range
Viscosity range
Electrical service
Specification
PUR slug melter with spur gear pump
125 mm and 150 mm
4 kg/hr (9 lb/hr)
One slug plus 0.75 kg reservoir
7.7 cc/rev.
75 bar (1100 psi)
Nickel RTD (Ni-120)
40–175 °C (100–350 °F)
0–50 °C (32–122 °F)
Up to 50,000 cps
200 VAC 1 or 3 phase 50/60 Hz
200 to 240 VAC 1 or 3 phase 50/60 Hz
380 to 415 VAC-Y (3 phase N/PE) 50/60 Hz
Maximum system power capacity
6000 watts
Input/Output capability standard
2 STD Inputs - programmable for function
3 STD Outputs - programmable for function
Key-to-Line
Number of hose/applicator pairs (1) 3
Approximate weight (empty)
100 kg (221 lb)
Protection
IP32
(1)
Standard Blue SeriesTM hoses and applicators
Dimensions
Dimensions mm (in.) PURBlue 4
Product dimension
Width (W)
Height (H)
Depth (D)
685 mm (27.0 in.)
964 mm (37.9 in.)
382 mm (15.0 in.)
Installation (service) dimensions
Width
Height
Depth
1112 mm (43.8 in.)
964 mm (37.9 in.)
782 mm (30.8 in.)
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com