Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

3-20 | Bulk Melters
DuraPail Bulk Melter
Specifications
Item
Type of system
Specification
Pail diameter mm (in.) 280 or 286 (11 or 11.3)
Maximum pump rate (1) kg/hr (lb/hr) 92 (203)
Number of hose/applicator pairs
Maximum working hydraulic pressure
Operating temperature range
Ambient temperature range
Temperature control stability
Temperature sensor
Electrical service (2)
Gerotor or Gear pump with fixed speed AC motor
2 (hydraulic and electrical)
2 additional (electrical only)
100 bar (1500 psi)
40–230 °C (100–450 °F)
-5–50 °C (23–122 °F)
±1 °C (2 °F)
Ni120
200 VAC 3Ø delta 50/60 Hz
240 VAC 3Ø delta 50/60 Hz
400 VAC 3Ø Y 50/60 Hz
400 VAC 3Ø delta 50/60 Hz
480 VAC 3Ø delta 50/60 Hz
Maximum system power capacity
9100 watts
Temperature sensor
Ni-120
Protection
IP54
Weight kg (lb) (3) (empty) 335 (739)
Input/Output capability
3 STD Outputs - programmable for function
4 STD Inputs - programmable for function
(1)
Actual rates will vary depending on adhesive type, application parameters and input voltage.
(2)
Permitted deviation from rated line voltage is ±10%.
(3)
Weight depends on melter configuration.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com