Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Web Content
Bulk Melters | 3-19
DuraPail Bulk Melter
Description
DuraPail bulk melters are designed to provide simple,
low-maintenance application of hot melt adhesives,
sealants and butyls from 20-liter and 5-gallon pails.
Many standard features, such as manual pressure
control and blow-off valves, simplify daily operation
and maintenance, helping increase productivity.
Choices of platen surfaces and gear pumps give
DuraPail bulk melters flexibility to meet a variety of
production demands.
DuraPail bulk melters only melt the top surface of
adhesive, allowing the remaining material in the pail to
stay solid. This reduces thermal stress on temperature
sensitive materials and protects the bonding
characteristics.
DuraPail bulk melters only melt the top surface of
adhesive, allowing the remaining material in the pail to
stay solid. This reduces thermal stress on temperature
sensitive materials and protects the bonding
characteristics.
DuraPail Bulk Melter
Features
• Choice of axial or smooth platen
• Manual pressure control valve to control adhesive
application pressure
• Dual hose/applicator configuration allows supply of
two independent applications from a single bulk melter
• Four additional temperature control channels to
control downstream hoses and applicators
• Single-side control and pail-change access
• Integral, programmable seven-day clock
• Hand-held applicator trigger connections - pump can
be turned on/off with hand-held applicator trigger to
minimize adhesive degradation
• Uses standard Best Choice (Ni-120) Nordson hoses and
applicators
• All controls and pail change operations are handled
from one side of the unit
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com