Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

3-14 | Bulk Melters
DuraDrum Bulk Melter
Specifications
Item
Type of system
Specification
Gear pumps with fixed speed AC motor
Drum diameter mm (in.) 571 or 567 (22.5 or 22.3)
Maximum pump rate (1) kg/hr (lb/hr) 245 (450)
Number of hose/applicator pairs
Maximum working hydraulic pressure
Operating temperature range
Ambient temperature range
Temperature control stability
Temperature sensor
Electrical service (2)
2 (hydraulic and electrical)
2 additional (electrical only)
100 bar (1500 psi)
40–230°C (100–450°F)
-5–50°C (23–122°F)
±1°C (2°F)
Ni120
200 VAC 3Ø delta 50/60 Hz
240 VAC 3Ø delta 50/60 Hz
400 VAC 3Ø Y 50/60 Hz
400 VAC 3Ø delta 50/60 Hz
480 VAC 3Ø delta 50/60 Hz
575 VAC 3Ø delta 50/60 Hz
Maximum system power capacity
33,100 watts
Weight (3) kg (lb) (empty) 675 (1488)
Input/output capability
3 STD Outputs - programmable for function
4 STD Inputs - programmable for function
Protection
IP54
(1)
Actual rates will vary depending on adhesive type, application parameters and input voltage.
(2)
Permitted deviation from rated line voltage is ±10%.
(3)
Weight depends on melter configuration.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com