Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Web Content
Bulk Melters | 3-13
DuraDrum Bulk Melter
Description
DuraDrum® bulk melters are designed to provide
simple, low-maintenance application of hot melt
adhesives, sealants and butyls from 200-liter or
55-gallon drums. Many standard features, such as
manual pressure control and blow-off valves, simplify
daily operation and maintenance, helping increase
productivity. Choices of platen surfaces and gear
pumps give DuraDrum bulk melters flexibility to meet
a variety of production demands.
DuraDrum bulk melters only melt the top surface
of adhesive, allowing the remaining material in the
drum to stay solid. This reduces thermal stress on
temperature sensitive materials and protects the
bonding characteristics.
A graphical, membrane control panel simplifies
programming and displays system status. The versatile
control panel provides programming by either they
keypad or arrow keys.
DuraDrum Bulk Melter
Features
• Modular, non-stick axial, finned and smooth melt
platens for quick change and easy clean-up
• Dual hose/applicator configuration allows supply of two
independent applications from a single bulk melter
• Up to eight additional temperature control channels to
control downstream hoses and applicators
• Manual pressure control valve to control adhesive
application pressure
• Integral, programmable seven-day clock
• Hand-held applicator trigger connections - pump can
be turned on/off with hand-held applicator trigger to
minimize adhesive degradation
• Uses standard 3000 style Ni-120 Nordson hoses and
applicators
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com