Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

3-8 | Bulk Melters
VersaPail
20-liter or 5-gallon Pail Melters
Specifications
Item
Type of system
Pail diameter
(Pail volume)
Maximum pump rate (1)
Platen surface
Number of hose/applicator pairs
Maximum working hydraulic pressure
Operating temperature range
Ambient temperature range
Temperature control stability
Temperature sensor
Electrical service (2)
Maximum system power capacity
Weight (empty) (3)
Protection
Approvals
Options
VersaPail Bulk Melter 20 Liter
Gear pumps with variable speed AC motors
280 mm (11 in.) or 286 mm (11.3 in.)
(20 liter/5 gallon)
92 kg/hr (203 lb/hr)
Axial or smooth
2 standard (hydraulic & electrical)
Up to 4 additional (electrical only)
100 bar (1500 psi)
200 bar (3000 psi) — HP piston pump only
40–230 °C (100–450 °F)
-5–40 °C (23–100 °F)
± 1 °C (2 °F)
Ni 120 (or PT-100 optional)
200 VAC 3 phase delta 50/60 Hz
240 VAC 3 phase delta 50/60 Hz
400 VAC 3 phase Y 50/60 Hz
400 VAC 3 phase delta 50/60 Hz
480 VAC 3 phase delta 50/60 Hz
21 kW
332 kg (732 lb)
IP54
CE
Output pressure control — flow control bypass or automatic pressure control
PROFIBUS-DP, PROFINET IO, ControlNet, or EtherNet/IP communication
4 additional temperature channels
Pump choices: Single-stream, dual-stream, hardened, or two-pump automatic or
manual aeration system
Casters
Exhaust hood
Warning light tower
(1)
Actual rates will vary depending on adhesive type, application parameters and input voltage.
(2)
Permitted deviation from rated line voltage is ±10%.
(3)
Weight depends on melter configuration.
PROFIBUS and PROFINET are registered trademarks of PROFIBUS & PROFINET International.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com