Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Foam Systems | 2-19
FoamMelt Processors
200 Series
Part Numbers
P/N
Description
1001601 FM 200, 240 VAC, 50/60 Hz, 3Ø, without neutral, standard pump
1001602 FM 200, 240 VAC, 50/60 Hz, 3Ø, without neutral, hi-output pump
1001603 FM 200, 400/230 VAC, 50/60 Hz, 3Ø, with neutral, standard pump
1001604 FM 200, 400/230 VAC, 50/60 Hz, 3Ø, with neutral, hi-output pump
Accessories
Accessory P/N Description Comment
H-20 and H-200/
Best Choice applicator
installation kits
Hose installation
kits non-circulating
applicators
310197 H-20 applicator kit Do not use with water-wash
310198 H-200/Best Choice applicator kit
hoses.
310790 Standard hose, 90°
310791 Standard hose, 45°
310792 Standard hose, straight
Hand-held applicator 111094 1.8 m (6 ft) automatic hose, 5/8 in. For recirculation loop.
installation kit dead-end
972120 Hand-held applicator hose connector Order one for each hand-held
hand-held applicators
applicator.
303536 5/16 in. hose-to-manifold fitting
Electrical extension 115577 1.8 m (6 ft) extension cord Order to connect jumper
cords
115578 3.7 m (12 ft) extension cord
hoses to unit.
115579 5.5 m (18 ft) extension cord
Hose fittings, 5/8 in. 719042 Automatic hose installation kit
hoses
719023 Hose-to-manifold fitting
972036 Hose to manifold, 90°
719024 Hose-to-applicator fitting (straight)
719047 Hose-to-applicator fitting (45°)
Gas installation kits 271382 Carbon dioxide gas installation kit
273170 Nitrogen gas installation kit
Density control/filter 142523 One-hole slug for low-viscosity materials
assemblies
142522 Two-hole slug for medium-viscosity materials Shipped with unit.
142517 Four-hole slug for high-viscosity materials
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com