Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

2-14 | Foam Systems
Ultra FoamMix PH Tank Systems
Features
• VX anti-stick and anti-oxidation coating for all surfaces
coming into contact with hot melt.
• Siemens® S7 PLC with intuitive touch panel for easy
operation and displays of all process parameters in local
languages
• PROFIBUS® interface
• Ethernet connection for remote diagnostics and service
• Free selection of foam percentage from 0% (solid) up to
70% foam (gas ratio) (depending on material)
• Selective temperature setbacks for prolonged
production breaks
• Permanent sensor failure monitoring with visual display
• Dry output contacts for reporting temperature drops
and temperature excursions as well as ready for
operation signal
• Double over-temperature protection
• Freely programmable limit values in the PLC
• Safety fuses
• Plug-in pre-melt register
• Foam circulation mode optional
• Key-to-line function
• Week/Day timer (via PLC)
• Start-up pressure control incl. sensor hoop guard
Siemens is a registered trademark of Siemens AG.
PROFIBUS is a registerd trademark of PROFIBUS & PROFINET
International.
Specifications
Item
Specification*
PH 100 UFM PH 200 UFM PH 400 UFM
Max. melt rate kg/hr (lb/hr) (1) 100 (220) 200 (440) 400 (880)
Foam output L/hr (in. 3 /hr) (2) 100 (6102) 200 (1204) 400 (24408)
Tank Volume L (in. 3 ) 100 (6102) 200 (1204) 400 (24408)
Rated power of UFM drives kW 5.6 9.8 15
Rated heating power kW (3) 30 50 65
Electrical service (4)
3 x 400 VAC + N+ PE
Max. adhesive pressure bar (psi) 100 (1450)
Max. operating temperature °C (°F) 250 (478)
Temperature sensors
PT100 / Ni-120/ Fe-CuNi
Hose connections
8, 13, 16, 20 mm
No. of UFM units 1 1 to 2 1 to 3
No. of adhesive outputs
1 or 2 per UFM unit
*This is a generic specification. Exact specifications of Engineered Systems are valid with order confirmation only.
(1)
Maximum output rate depends on adhesive.
(2)
Foam rate depends on adhesive as well as on custom specification of the UFM unit.
(3)
Heating Power without hoses and applicators.
(4)
Transformer may be needed for any other local power supply.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com