Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

2-2 | Foam Systems
SureFoam Dispensing Systems
Specifications
Item
Holding capacity
Melt rate
Delivery rate (1)
Specification
N/A
N/A
Density reduction (1) 50%
Viscosity range (2)
Gas supply
Air supply
Temperature range
Hose/applicator or hose/handgun
capacity
Electrical service
35 kg/hr (77 lb/hr)
1000–30000 cps
Industrial grade nitrogen, 1500 psi minimum
Clean, dry, compressed air, 6 bar (90 psi) maximum
38–232 °C (100–450 °F)
Single
Heaters: 240V, 1-phase, 50/60 Hz 700 W (supplied by melter)
Motor/controls: 120V or 240V, 1-phase, 90 W
Dimensions (L x W x H)
Weight (empty)
Approvals and certifications
349 mm x 260 mm x 476 mm (13.75 in. x 10.25 in. x 18.75 in.)
24 kg (53 lb)
CE
(1)
Actual rates can vary depending on adhesive viscosity and other characteristics.
(2)
Depends on required delivery rates and desired foam density.
Part Numbers
P/N
Description
1076606 120V, 50/60 Hz mixer motor/control, 240V heater
1076675 240V, 50/60 Hz mixer motor/control, 240V heater
1089072 240V, 50/60 Hz mixer motor/control, 240V heater, PT100
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com