Nordson's Adhesives & Sealants Guide - 2020-2021 (13th Edition)

Adhesive & Sealants Equipment Guide
Melters | 1-77
VersaBlue XN and XC Series Adhesive Melters
Specifications — VersaBlue XN (contd.)
Parameter Twin 50/50 Twin 50/100 Twin 100/100
Number of tanks 2 2 2
Tank volume L (in. 3 )
With extended hopper L (in. 3 )
50/50 (3051/3051) 50/100 (3051/6102) 100/100 (6102/6102)
75/75 (4577/4577) 75/150 (4577/9154) 150/150 (9154/9154)
Holding capacity kg (lb)
with extended hopper kg (lb)
47.5/47.5 (104.8/104.8) 47.5/95 (104.8/209.4) 95/95 (209.4/209.4)
71.3/71.3 (157.2/157.2) 71.3/142.5 (157.2/314.2) 142.5/142.5 (314.2/314.2)
Melt rate kg/hr (lb/hr) 50/50 (110/110) 50/100 (110/220) 100/100 (220/220)
Throughput kg/hr (lb/hr) 75/75 (165/165) 75/125 (165/275) 125125 (275/275)
Pump speed (rev/min):
Minimum speed
Maximum speed
Max. number of pumps:
Single-stream
8
Dual-stream
6 7 8
Motor size (W) 250
Maximum number of motors 8
Maximum hose/applicator capacity 26
Max. hose/applicator power (W):
each hose or applicator
each hose/applicator pair
total power available for H/A
2000
4000
46000
Maximum external drive controls (1) 6
Maximum external (analog) pressure inputs 16
Maximum external (digital) pressure inputs 12
Maximum air run-up control channels 16
Max. melter power (W) 72800 81350 8990
Electrical service 50/60 Hz (V)
3/PE AC 200–240
3/N/PE AC 380–415 Y
Control system
Rockwell ControlLogix Siemens S7
Filter area cm 2 (in. 2 ) 103 (16)
Melter dimensions: W x H x D mm (in.)
1460 x 2015 x 1900 1460 x 2015 x 2150 1460 x 2015 x 2400
(57.2 x 79.3 x 74.8) (57.2 x 79.3 x 84.7) (57.2 x 79.3 x 94.5)
Service envelope: W x H x D mm (in.)
1932 x 2244 x 2535
(76.1 x 88.3 x 99.8)
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
5
80
2182 x 2244 x 2785
(85.9 x 88.3 x 109.7)
2181 x 2244 x 3035
(85.9 x 88.3 x 119.5)
Weight, empty kg (lb) 970 (2134) 1170 (2574) 1370 (3014)
Ambient temperature range °C (°F)
0–50 °C (32–122 °F)
Operating temperature range °C (°F)
40–230 °C (104–450 °F)
Viscosity range (cps) 1,000–50,000
Max. hydraulic pressure
85 bar/8.5 MPa
Approvals
CE
Enclosure rating IP 54
(1)
Melters can utilize unused internal motor controls for additional external drive controls.