Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Agricultural Tyres<br />
6 PAGE SPECIAL FEATURE<br />
Issue 387 > $7.95 > On sale 16/07/20<br />
Tractors, farm machinery & materials handling equipment for sale<br />
>> INSIDE<br />
Universal Appeal<br />
Moore Unidrill<br />
Quiet Achiever<br />
Ubco 2x2 <strong>Farm</strong> Bike<br />
Widespread<br />
Top ten spreader reviews<br />
leading<br />
WORLD<br />
Orders have doubled for Massey Ferguson’s sturdy<br />
and straight-forward Global Series of tractors in 2020,<br />
and it isn’t difficult to see why >> Page 14<br />
,!3BD0A6-aaejdg!:k;s<br />
$280,500 $65,000<br />
$5,899 $53,460<br />
CASE IH 8230. 3491 hours, 2250 rotor hours,<br />
auto steer pro 700 screen • VIC 0428 644 490<br />
2010 John Deere 6630. Exc cond, power quad<br />
trans, quick hitch + more • QLD 0419 988 158<br />
2015 Polaris Ranger 900 XP EPS. High lifter,<br />
331 hours, good condition • WA 08 6102 5127<br />
39,015+<br />
items for sale<br />
in print & online<br />
2020 Frahn VAL1500-6. Grain cleaner, 3<br />
phase power, tandem axle • VIC 0418 504 269<br />
8,055+<br />
Trucks, utes and<br />
4x4s now for sale!
OUR NEW LINEUP OF BOBCAT COMPACT TRACTORS<br />
ARE DESIGNED FOR THE WAY YOU WORK.<br />
CT1025 | 26hp<br />
CT2035 | 35hp<br />
CT2040 | 38hp<br />
STOCK CLEARANCE ON BOBCAT TL30.60 TELECOPIC<br />
HANDLER MODELS. *<br />
3T Capacity<br />
A/C Cab<br />
Hydraulic Quick Detach<br />
2spd Hydrostatic Trans<br />
100hp Perkins Engine<br />
3 Steer Modes<br />
Tropical Cooling Pack<br />
*Standard Bucket and Pallet Fork included with Bobcat TL30.60 Telehandler.<br />
Freight and assembly charges may be applicable. Terms and conditions apply.<br />
Contact Clark <strong>Farm</strong> Equipment for further details. Clark <strong>Farm</strong> Equipment reserves<br />
the right to correct any print errors. Offer ends 31/08/2020 or while stock lasts.<br />
www.clarkfarmequipment.com.au<br />
sales@clarkfarmequipment.com.au<br />
1800 648 384<br />
Clark <strong>Farm</strong> Equipment<br />
clarkfarmequipment<br />
Clark <strong>Farm</strong> Equipment
THE ENGINE OIL<br />
THAT WORKS AS<br />
HARD AS YOU<br />
Our customers depend on Shell Rimula to<br />
protect their equipment operating in the<br />
most challenging Australian conditions.<br />
Shell Rimula has a proven reputation to deliver outstanding reliability<br />
and wear protection. Shell Rimula API CK-4 oils are formulated with<br />
Adaptive Additive Technology that is designed to safeguard engines<br />
against wear and acid corrosion, which can be harmful to engine<br />
and oil life.<br />
Coupled with a comprehensive range of transmission, gearbox,<br />
hydraulic and diff oils as well as greases and coolants, our range of<br />
lubricants cover just about every application to keep your equipment<br />
working as hard as you do.<br />
To find out more about Shell Rimula and other quality lubricants –<br />
call our local technical team on 1300 134 205 or<br />
visit Shell.com.au/Rimula<br />
Need more information?<br />
Visit shell.com.au/lubematch<br />
or download the Shell LubeMatch App<br />
SHELL LUBRICANTS<br />
TOGETHER ANYTHING IS POSSIBLE
CONTENTS<br />
New business<br />
advertising<br />
Email newsales@bauer-media.com.au<br />
or call the state representative below<br />
Private advertising<br />
ADVERTISE tradefarmmachinery.com.au/sell<br />
EMAIL privateads@bauer-media.com.au<br />
PHONE 1300 362 272<br />
Advertiser services<br />
1300 362 355<br />
Editorial<br />
EDITOR Andrew Hobbs<br />
ahobbs@bauer-media.com.au<br />
DEPUTY EDITOR & DCM Harrison Hunkin<br />
hhunkin@bauer-media.com.au<br />
CONTRIBUTORS<br />
Tom Dickson, Jaiden Drought, Steve Kealy,<br />
Brent Lilley, William McKnight,<br />
Gary Northover, Matt Raudonikis,<br />
Trevor Whittington<br />
EDITORIAL DESIGN Daz Woolley<br />
SUB-EDITOR Cat Fitzpatrick<br />
EDITORIAL AND NEWS:<br />
73 Atherton Rd, Oakleigh, VIC, 3166<br />
Tel: 0429 530171<br />
Email: ahobbs@bauer-media.com.au<br />
Digital<br />
PRODUCER Michael Cahill<br />
Marketing &<br />
distribution<br />
MARKETING MANAGER Andrew Amato<br />
CIRCULATION MANAGER Stuart Jones<br />
Advertising<br />
BRAND SALES MANAGER<br />
Carl Rakusin 0409 838 984<br />
crakusin@bauer-media.com.au<br />
KEY ACCOUNTS DIRECTOR<br />
Peter Gatti 0437 895 600<br />
pgatti@bauer-media.com.au<br />
VIC William Laycock 0408 053 289<br />
wlaycock@bauer-media.com.au<br />
QLD Greg Messenger 07 3101 6615<br />
gmessenger@bauer-media.com.au<br />
SA Nick Lenthall 0439 485 835<br />
nlenthall@bauer-media.com.au<br />
WA Greg Boase 0438 905 869<br />
gboase@bauer-media.com.au<br />
Finance<br />
SENIOR ACCOUNTANT Andrew Hughes<br />
Executive Group<br />
GM – PUBLISHING Terry Williams-King<br />
GM – INDUSTRY Graham Gardiner<br />
COMMERCIAL CONTENT DIRECTOR<br />
Matt Rice<br />
SUPPORT SERVICES MANAGER<br />
Regina Fellner<br />
SENIOR PRODUCER Tim Kennington<br />
FINANCE MANAGER Cain Murphy<br />
Subscriptions<br />
Tel: 136 116 Fax: 02 9267 4363<br />
Web: magshop.com.au<br />
<strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong> Subscription<br />
Reply Paid 4967, Sydney, NSW, 2001<br />
For advertising terms<br />
& conditions:<br />
www.industry.bauer-media.com.au<br />
ISSN 1449-6399<br />
14<br />
News<br />
06 JD to release two new combines<br />
08 TYM’s small T613 tractor launched<br />
10 Duraquip launches Seed Storm<br />
12 CFMoto fits ATV protection systems<br />
14 Cover Story: Massey Ferguson<br />
16 2021 Mazda BT-50 first look<br />
18 JD 4-Series sprayer updates<br />
19 Miller Nitro 7000 series upgrade<br />
20 JCB added to Roylances’ lineup<br />
22 ABARES announces production rise<br />
23 ABARES flags crop growth boost<br />
24 Rabobank says rural confidence high<br />
28 DDT returns at different venue<br />
Tyres<br />
36 Wet Weather Wonder<br />
Tianli Tyres’ Agro Grip range<br />
38 Moving On Up<br />
Camso range now distributed by TKV<br />
40 Split Rim Safety<br />
Tips for safe use of split rims<br />
Reviews<br />
42 Uni-versal Appeal<br />
Moore Unidrill<br />
46 A Quiet Achiever<br />
Ubco 2x2 electric bike<br />
Spreader Reviews<br />
50 Spread it Round<br />
Vicon RO-EDW Geospread<br />
51 The Business of Spreading<br />
Bogballe’s M-Line range<br />
52 Rise of the Machines<br />
Kuhn Axis 50.1 spreader<br />
54 Hill Country Hero<br />
Agrex XPI spreader<br />
55 Highly Accurate<br />
Amazone ZA-TS Profis Hydro<br />
56 Price of Perfection<br />
Giltrap 5001 spreader<br />
58 Science of Spreading<br />
Bredal F8 fertiliser spreader<br />
34<br />
Regulars<br />
26 Events calendar<br />
30 Market analysis<br />
34 WA<strong>Farm</strong>ers column<br />
85 Plant & Equipment<br />
Cranes, compressors<br />
and more<br />
112 Private advertising<br />
How to list your item<br />
for sale + rates,<br />
deadlines and coupon<br />
113 Index<br />
42<br />
54<br />
60 Sweet Option<br />
Reefa fertiliser spreader<br />
<strong><strong>Farm</strong>s</strong> and <strong>Farm</strong> <strong>Machinery</strong> is published by Bauer<br />
Trader Media, a division of Bauer Media Limited. ABN<br />
18 053 273 546, 54-58 Park Street, Sydney, NSW,<br />
2000. All material in <strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong> is<br />
protected by the Commonwealth Copyright Act, 1968.<br />
No material may be reproduced in part or in whole<br />
without written consent from the copyright holder.<br />
*Recommended maximum retail price. Distributed by<br />
Ovato Distribution. Printed by APN Print, QLD.<br />
62 Up for the Challenge<br />
Toogong farm spreader<br />
63 Sam’s the Man<br />
Sam Spreader<br />
4 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
23 McCormick Road Kyabram Victoria 3620 / Ph: 03 585 22 444 / info@jnrengineering.com.au<br />
LP Series<br />
Introducing the LP8000, 8 meter or 6 meter<br />
width Land Plane, twin mast independent for lift<br />
precision, dragging capabilities of approximately<br />
5 cubic meters.<br />
DG Series<br />
The DG Series is currently being manufactured in<br />
3.6m or 4.2m width Drag Grader has independent<br />
lift for laser precision. Dragging capabilities of<br />
approximately 3.5-4.5 cubic meters<br />
Bale Bull Round<br />
The BBR maintains a strong robust design capable of handling<br />
the heaviest bales. This machine is capable of carrying two<br />
bales and feeds on both sides. It is one of the only machines in<br />
the market that is able to feed the toughest of silage bales<br />
HDE Ejector<br />
Cut Sizes 3.6 & 4.2m -Rips -Carries -Cross levels -Laser levels.<br />
www.jnrengineering.com.au<br />
Leopard Ejector<br />
Cut Sizes 3.0m, 3.6m & 4.2m-Rips -Carries -Cross Levels -Laser Levels.<br />
HDB Bucket<br />
Cut sizes 3.6m & 4.2m<br />
-Rips -Carries<br />
-Cross levels -Laser levels.<br />
LB Bucket<br />
Cut sizes 2.7m & 3.0m-Rips<br />
-Carries -Cross Levels -Laser<br />
Levels.<br />
Bale Bull Square<br />
Features an adjustable moving<br />
arm for feed out control and<br />
on road transport, capable of<br />
carring two bales.<br />
XSE Ejector<br />
Cut sizes 1.8m, 2.4m<br />
-Rips -Carries -Cross levels<br />
-Laser levels<br />
FFM-FP-5145966-TS-365<br />
For more info, check out our YouTube Channel and Facebook Page under JN&R Engineering
PRODUCT NEWS<br />
big debut<br />
Set to arrive in 2021, two<br />
new combine harvester<br />
models are “specifically<br />
designed for large-acre<br />
farmers who need more<br />
harvesting capacity”,<br />
John Deere says<br />
Top: Deere says the new X Series will<br />
provide greater harvesting capacity for highyielding<br />
crops<br />
Above left: X Series combine harvesters<br />
are available on wheels or tracks with<br />
Control Traffic <strong>Farm</strong>ing configurations<br />
Above right: Demonstration units of the<br />
new combine harvesters are expected to hit<br />
Australian shores in late 2021<br />
We expect to see a couple<br />
of demonstration units on<br />
the ground in late 2021.<br />
John Deere has added to its S700 series of combine harvesters<br />
with a new combine harvester range designed specifically for<br />
big properties.<br />
Deere says the new X9 1000 and X9 1100 will complement<br />
the existing models by helping large-scale farmers to thresh,<br />
separate and clean more grain every hour, even under<br />
changing conditions.<br />
John Deere tactical segment manager Marko Koelln says X9<br />
Harvester models adjust automatically to handle damp or dry<br />
straw, making threshing and separating easier without the<br />
operator needing to adjust harvester settings.<br />
“At the heart of the new combine is the X Series Dual Separator<br />
(XDS) with the largest threshing and separation areas Deere has<br />
ever offered,” Koelln says.<br />
“Crop in the XDS is threshed and separated during nine<br />
revolutions, resulting in less grain loss and increased<br />
harvesting capacity.”<br />
To handle this, the X Series harvesters have a wide feeder<br />
house, dual separator, and the seven square metre Dyna-Flo XL<br />
cleaning shoe, which Deere says is the industry’s largest, with 36<br />
per cent more cleaning area than the S790 harvester.<br />
On top of this, Koelln says the X Series models use 20 per<br />
cent less fuel per tonne than the S790, running up to 14 hours<br />
without refuelling, thanks to a John Deere PowerTech 13.6 litre<br />
engine and the updated ProDrive XL Transmission.<br />
Available on either wheels or tracks, the X9 1000 grain tank<br />
can hold up to 14,800L, while the X9 1100 holds up to 16,200L –<br />
five per cent and 15 per cent more than the S790 respectively.<br />
Folding unloading augers with adjustable spouts are available<br />
for the X Series in 7.9m, 8.7m or 9.4m lengths.<br />
PRECISION AGRICULTURE OFFER<br />
The X Series combine harvesters are available with integrated<br />
precision ag technologies that collect important machine and<br />
yield data while helping to improve harvesting results.<br />
Available as standard are the JDLink connection system<br />
and an integrated StarFire 6000 Receiver, which will boot<br />
up more quickly as it requires no calibration of the Terrain<br />
Compensation Module (TCM).<br />
Deere’s Premium package offers Active Terrain Adjustment and<br />
the Premium 3.0 Activation with AutoTrac RowSense, section<br />
control and in-field data sharing, while the Ultimate package<br />
includes Deere’s Combine Advisor technology package with<br />
ActiveVision camera technology and auto maintain.<br />
“Industry-leading harvest solutions such as the Combine<br />
Advisor package optimise and automate main harvester<br />
functions when conditions change, increase fuel efficiency and<br />
give greater ground coverage to shorten the harvest window,”<br />
Koelln says.<br />
All X Series combine harvesters can connect to the John<br />
Deere Operations Centre, a cloud-based, central location<br />
where farmers can electronically share machine or operational<br />
information with trusted partners and advisors.<br />
The harvesters also have more USB ports and more storage<br />
space, with an optional touchscreen radio available for use with<br />
a smart phone.<br />
Koelln says he is excited to see how the new models can meet<br />
the needs of Australian grain growers.<br />
“We expect to see a couple of demonstration units on the<br />
ground in late 2021, when we’ll also start taking orders for<br />
deliveries the following year, he says.<br />
“We’re also looking forward to making further announcements<br />
around our range of headers to suit both the X9 and the S700<br />
series very shortly.”<br />
6 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
FFM-FP-5163917-CS-369
PRODUCT NEWS<br />
Left: TYM’s T603 tractor range is<br />
ideal for smaller spaces<br />
small is beautiful<br />
Initial replacement for<br />
Korean manufacturer<br />
TYM’s T603 tractor range<br />
will be smaller with fewer<br />
speeds, but an equally<br />
powerful engine and<br />
improved interior<br />
The new 60hp (45kW) T613 tractor launched by Korean<br />
manufacturer TYM has new styling, improved ergonomics<br />
and a new ‘smooth and quiet’ TYM four-cylinder diesel engine,<br />
local distributor Inlon says.<br />
Currently only available as a rollover protection systemequipped<br />
model, the T613 replaces the T603 – which Inlon says<br />
is the oldest model in its lineup.<br />
The T613 has a full synchromesh 12-speed transmission –<br />
unlike the T603’s 24 speed transmission – with a synchro-shuttle<br />
lever located under the steering wheel.<br />
It also comes with a two-speed independent power takeoff<br />
(PTO) as standard with 540 and 540 Economy and two<br />
double acting remotes, along with an Auto-PTO function that<br />
automatically disengages the PTO when the linkage is raised,<br />
and automatically re-engages when lowered.<br />
The new model is smaller than its predecessor, 3,300mm long,<br />
rather than 3,722mm and weighs less, at 1,960kg instead of<br />
2,360kg. It also has a 52-degree turning circle – making it ideal<br />
for small spaces.<br />
Other highlights include its 42-litre per minute hydraulic pump<br />
to provide fast loader operation while the steering has its own<br />
19-litre per minute pump – an improvement on the T603’s<br />
39.6-litre and 17.6-litre pumps respectively.<br />
The T613 operator will enjoy wide access to get on and off<br />
the tractor, as well as a flat deck floor, suspension seating and<br />
a diesel tank situated beneath the platform with unobstructed<br />
access to the filler point.<br />
The T613 has a three-point linkage with 1,500kg lifting capacity<br />
gives the tractor great versatility and a range of applications,<br />
while its 50-litre fuel tank capacity will provide for many<br />
working hours.<br />
Inlon is offering the TYM T613 tractor as a package, which pairs<br />
the T613 with a self-levelling loader with 4-in-1 bucket, joystick<br />
control and a Euro hitch.<br />
The local distributor says the tractor is eligible for an instant<br />
asset tax write-off under the federal government’s current<br />
stimulus package, adding that an air-conditioned cabin and HST<br />
version of the TYM T613 is coming soon.<br />
TRACTORS<br />
OFFER ENDS 31ST JULY 2020<br />
8 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND<br />
For more information<br />
and your nearest dealer<br />
1800 849 090<br />
www.tym.ag/712
GERONIMO FARM<br />
EQUIPMENT<br />
HYDRAULIC DRIVE.<br />
Match the reel bat speed to your picking needs, stop the<br />
reel to pick a single large rock or clear a jammed rock by<br />
reversing the reel.<br />
WIDE RANGE OF RAKE HEIGHTS.<br />
Adjust rake height and use bats for support to pick large<br />
rocks and load them into the hopper. Or, keep rake at a<br />
minimal angle to separate rocks from dirt quickly and with<br />
minimal ground disturbance.<br />
SHOCK PROTECTION.<br />
Both reels and forks are shock-protected to allow our to<br />
remove extra-large rocks.<br />
The small but mighty RR250ST picks rocks up to 24” x 45”<br />
(61 x 144 cm) and the RR900ST handles rocks up to<br />
28” x 55” (81 x 140 cm).<br />
SIMPLE TO DUMP ROCKS.<br />
An electric solenoid lets you unload with the flick of<br />
a switch from your tractor.<br />
READY TO MOVE.<br />
The Hydraulic angled hitch allows you to go from transport<br />
to field mode and back again quickly and easily.<br />
RR900ST<br />
ROCKPICKER FEATURES<br />
RR250ST<br />
3.2 CU YD / 3.2 CU M CAPACITY<br />
10.8’ / 3.3 m Transport Width<br />
1.25 CU YD / 1 CU M CAPACITY<br />
8.7’ / 2.7 m Transport Width<br />
RAKE YOUR<br />
ROCKS<br />
Clean up your field in record time<br />
when you use a Rite Way Windrower in<br />
conjuntion with your ROCKPICKER.<br />
WINDROWER FEATURES<br />
AFFORDABLE AND EFFICIENT.<br />
An affordable way to speed up your rock picking.<br />
Handles rocks from 1½’’ to 12’’ (4 to 30 cm) diameter.<br />
THREE-ROW SPIRAL DESIGN.<br />
For improved speed and efficiency of delivering<br />
rocks to windrow.<br />
REPLACEABLE HARD-SURFACE TEETH.<br />
Ensures long life of the equipment.<br />
HYDRAULIC DRIVE.<br />
Hydraulics control both the depth of the rake<br />
and the field to transport positions.<br />
SEEDBED PREPARATION.<br />
Efficiency breaks up clumps and<br />
prepares the soil for seeding.<br />
WORKING WIDTH.<br />
142” ( 3½ m)<br />
WINDROWER STANDARD EQUIPMENT:<br />
Replaceable hard surface teeth<br />
ROCK WINDROWER<br />
RW1200HD<br />
RM6685625<br />
Ashley Webster<br />
Ph: 0407 431 566<br />
Head Office - 77 Pridham Street, Cowra<br />
Office Number: 02 6341 3369<br />
Email: sales@geronimo.com.au<br />
Web: www.geronimo.com.au<br />
Chris Sweeny<br />
Ph: 0417 537 482
PRODUCT NEWS<br />
storm season<br />
Duraquip introduces new<br />
Seed Storm seeding bar<br />
Above: The Seed Storm comes in options<br />
of 35 (10.7m) to 80-foot (24.3m) bar<br />
widths and 10 to 12-inch (25.4–30cm)<br />
spacing widths<br />
nown for its range of truck trailers and tankers, Aussie<br />
Kmanufacturing company Duraquip has launched into the<br />
agricultural implement market with its new Seed Storm seeding bar.<br />
After 10 months of rigorous field testing, the Aussie-made Seed<br />
Storm was recently debuted to the public at a demonstration<br />
day held in Duraquip’s native Gnowangerup in Western Australia.<br />
Duraquip director Garry Richardson says there is a growing<br />
market for 80ft (24.3m) seeding bars and thinks the Seed Storm<br />
could be the solution.<br />
“The 80ft seeding bar market is growing, there are farmers out<br />
there who want to get more done, and we now have tractors<br />
that can pull these machines,” he says.<br />
“<strong>Farm</strong>ers are chasing efficiency. Times and seasons are<br />
changing, to the point that what was once considered a good<br />
start date for seeding has now become a finish date.<br />
“We wanted to build a bar that would perform well in whatever<br />
conditions it had to work in and get a lot of crop in fast,”<br />
Richardson adds.<br />
Features of the Seed Storm include its flexible frame<br />
connections, 35-80 foot (10.7-24.4m) bar options and 10 to 12-<br />
inch (25.4–30cm) spacing options. It also includes a retractable<br />
tine system, a single-lift cylinder controlling the whole frame as<br />
well as an optional patent-pending castor lock system to assist<br />
with bar tracking.<br />
“We needed every box ticked and we are doing it with this bar,”<br />
Richardson says. “This has been 10 months of development,<br />
with two machines in the field, an 80ft and a 60ft (18.3m), each<br />
covering approximately 4,000 hectares with minimal issues.<br />
“One thing we want to eliminate is uneven depth control,”<br />
Richardson adds.<br />
“So, we developed a single-cylinder hydraulic lift system which<br />
mechanically maintains the frame level 100 per cent of the time.<br />
“The Seed Storm has a strong frame but we made it flexible<br />
enough so it would avoid cracking, it also has a floating drawbar<br />
for contour following ability and excellent fore and aft frame<br />
stability. It rides where you set it, doesn’t twist into the ground,<br />
and doesn’t skate along the top either, even in exceptionally<br />
hard digging conditions.”<br />
The flagship 80ft Seed Storm features 20 large diameter, high<br />
flotation wheels as well as Rim patterns and wheel bearings that<br />
are uniform across the machine.<br />
Duraquip says trash flow is maximised thanks to the Seed<br />
Storm’s wheels, which all sit clear above the seeding area and<br />
are situated In front and behind the tine ranks.<br />
In regards to maintenance, the Seed Storm incorporates ‘longlasting’<br />
Gar-Max bushels throughout the implement, which<br />
Duraquip says makes it virtually greaseless.<br />
Duraquip’s development of its retracting hydraulic tine system<br />
and mainframe lift makes for a manageable 7.5m transport<br />
width and road clearance on an 80ft bar. Duraquip says this<br />
“makes for a lot of room to change points – you’re not crawling<br />
through a jungle of tines only just off the ground”.<br />
The Australian-made Seed Storm will receive a limited<br />
production run for 2021 before moving into full-scale production<br />
the following year and will be available through its exclusive<br />
dealer, McIntosh & Son.<br />
TRACTORS<br />
OFFER ENDS 31ST JULY 2020<br />
10 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND<br />
For more information<br />
and your nearest dealer<br />
1800 849 090<br />
www.tym.ag/717
PRODUCT NEWS<br />
Left: CFMoto will be meeting new ATV safety<br />
standards a year early, by October 2020<br />
challenge accepted<br />
CFMoto announces<br />
addition of operator<br />
protection devices to<br />
ATVs<br />
CFMoto has met the government’s challenge head-on,<br />
announcing it will affix operator protection devices on all<br />
new all-terrain vehicles (ATVs) sold from October this year amid<br />
the release of a new model.<br />
It’s got 30 horsepower (22kW), a 400cc single cylinder engine,<br />
CVTech transmission, electronic power steering, a 70kg rear<br />
carrier rack capacity and a tow capacity of 350kg.<br />
But arguably the most important feature of the new C Force<br />
400 EPS ATV is its operator protection device (OPD) – set to<br />
come as standard on all CFMoto ATVs sold in Australia after<br />
October this year.<br />
The move comes after ATV manufacturers Polaris, Yamaha,<br />
Honda and Suzuki all announced plans to withdraw ATVs from<br />
sale in Australia from October 11, 2021 if not sooner, saying they<br />
were unwilling to meet new Australian safety standards.<br />
The standard requires that after that date, all new ATVs must<br />
be sold with an operator protection device (OPD) or rollover bar<br />
either fitted or integrated into the design.<br />
CFMoto’s Australian distributor is Mojo Motorcycles, and<br />
company director Michael Poynton says CFMoto will work<br />
closely with its dealer network to meet those requirements by<br />
October this year – one year early.<br />
“Following our own assessment of the Consumer Goods (quad<br />
bikes) Safety Standard in 2019, we made the decision to remain<br />
in the Australian market with CFMoto quad bikes,” he says.<br />
“Introducing a new quad bike range that complies with<br />
stage 2 of the Consumer Goods Quad Bike Safety Standard<br />
requirements by October 2020, one year ahead of the<br />
mandatory timeline, shows our commitment to remain in the<br />
Australian market.”<br />
Poynton says Mojo had worked with Quadbar on creating a<br />
tailored OPD solution to be installed by the company’s dealer<br />
network during the pre-delivery process.<br />
“Quadbar was one of two OPD manufacturers listed in the<br />
government standard,” he says.<br />
“Being an Australian-made product with 13 years of research<br />
and development invested in their design, we viewed them as<br />
a good partner to work with for the supply of OPDs to meet the<br />
requirements of stage 2 under the Standard.”<br />
The company also engaged Sydney research facility Crashlab<br />
to conduct tilt angle testing and ensure the ATVs met the<br />
standard’s new minimum stability requirements.<br />
The new CForce 400 model has a 32.6 degree lateral pitch and<br />
44.6 degree rearward pitch, well over the Standard’s minimum<br />
of 28.81 degrees and 38.65 degrees respectively.<br />
The new CForce 400 EPS is available now from your local<br />
dealer for the ride away price of $7,990.<br />
EVERYTHING YOU NEED<br />
FOR HAY MAKING.<br />
Suited to farmers and contractors, discover how Enorossi<br />
hay making equipment could benefit your land today.<br />
PROUDLY MADE IN ITALY<br />
www.clarkfarmequipment.com.au<br />
sales@clarkfarmequipment.com.au<br />
1800 648 384<br />
Clark <strong>Farm</strong> Equipment<br />
clarkfarmequipment<br />
Clark <strong>Farm</strong> Equipment<br />
12 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
FFM-FP-5129840-CS-374
COVER STORY<br />
1<br />
leading<br />
WORLD<br />
Sturdy and straight-forward,<br />
Massey Ferguson’s allpurpose<br />
Global Series<br />
tractors are in peak demand<br />
and with features and<br />
performance like this, it<br />
isn’t difficult to see why<br />
Locally, we have seen<br />
our order intake double<br />
in 2020.<br />
Australian farmers have been among the top buyers of<br />
Massey Ferguson’s Global Series tractors since they were<br />
first released in 2014, and demand is showing no signs of<br />
slowing down.<br />
Massey Ferguson Australia and New Zealand product<br />
marketing manager Simon Van Kruining says the company set<br />
out to create something different in the three, all newly designed<br />
MF 4700, MF 5700 and MF 6700 ranges.<br />
“Locally, we have seen our order intake double in 2020 thanks<br />
to the Global Series’ rugged design, premium comfort and class<br />
leading performance,” he says.<br />
These traits come from a US$350 million (A$508.4 million)<br />
investment in tractor design, with more than 90 per cent of<br />
parts redesigned and manufactured specifically for the 70–130<br />
horsepower (52–97kW) range.<br />
EFFICIENT ENGINES<br />
Described as “the epitome of reliability and integral<br />
dependability”, all Global Series engines have a long stroke<br />
design that provides high levels of torque across a broad speed<br />
range, with maximum torque achieved at low engine speeds –<br />
helping to minimise diesel use.<br />
All tractors come powered by the world renowned, powerful<br />
and reliable AGCO Power engines, which provide exceptional<br />
torque, power, fuel efficiency and extremely long life. These are<br />
powered by the same engine design that powers the higher end<br />
Massey Ferguson tractor range, from 70hp all the way to over<br />
400hp (298kW).<br />
Comprising the 74hp (55kW) MF4707, the 82hp (61kW) MF 4708<br />
and the 95hp (71kW) MF 4709, the MF4700 range is the smallest<br />
within the series and powered by a powerful and dependable<br />
3.3 litre, AGCO Power three cylinder engine.<br />
In the higher end of the series, the 90hp (67kW) MF 5709<br />
and 102hp (76kW) MF5710, together with the heavier duty MF<br />
3711 (112hp/83.5kW), MF 6712 (122hp/91kW) and MF 6713<br />
(132hp/98kW) all boast a 4.4 litre AGCO Power four cylinder<br />
engine.<br />
“It was important to us that we had a range of tractors tailored<br />
to this range of horsepowers. We quickly realised we needed to<br />
start fresh and as such we decided we needed to manufacture<br />
these in a facility that was state-of-the-art and built from the<br />
ground up” Van Kruining says.<br />
“The investment has proved incredibly successful, with<br />
demand globally for these tractors so great that we now<br />
have simultaneous production in three separate state-of-theart<br />
factories across the world. Development in the range is<br />
happening daily and it’s an exciting time to be involved!”<br />
Whilst the MF4707 and MF4708 are the only two models<br />
available that offer the option for a smooth and simple 12x12<br />
mechanical shuttle, all models in the range, from the MF4707 to<br />
MF6713 , offer the incredibly unique Massey Ferguson fingertip<br />
power shuttle transmission control – providing unparalleled<br />
driving comfort and control throughout the ranges.<br />
Offering a simplified, high performance 12x12 transmission, six<br />
gears are within the 4–12km/hr typical fieldwork range, while<br />
maximum speed is 40km/h, and 30km/h on MF 4700 ST models.<br />
The larger gear spreads mean less shifting and more flexibility.<br />
The non-ST models also have a Super Creeper option, travelling<br />
at 140m/h, for when the lowest speeds are needed, making it<br />
perfectly suited to vegetable markets.<br />
14 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
COVER STORY<br />
21<br />
3<br />
4<br />
TOP GEAR<br />
Simon van Kruining says the redesigned transmission is the<br />
reason for the Global Series’ success, making the tractor easier<br />
to use on a day-to-day basis.<br />
“An all new redesigned transmission and drive line, the Global<br />
Series boasts some of the lowest power losses to the PTO<br />
[power take-off] available on the market, all thanks to the<br />
technology behind the clean sheet design,” van Kruining says.<br />
These changes help achieve maximum efficiency, exceptional<br />
fuel economy and premium driving pleasure, he adds.<br />
The Global Series also has three de-clutch options on offer,<br />
meaning the operator can shift gears without needing to use the<br />
clutch pedal.<br />
For power shuttle models, unique to the Massey Ferguson<br />
brand is the left hand fingertip Power-Control lever, providing<br />
unprecedented control and comfort. The lever also allows the<br />
operator to shuffle between forward, reverse and neutral and lift<br />
up to de-clutch.<br />
For greater accuracy, shuttle responsiveness can be adjusted<br />
using the Comfort Control selector, the ultimate combination for<br />
working with a front loader.<br />
All Global Series models offer an independent PTO clutch<br />
that engages electro-hydraulically, helping to control the rate<br />
of engagement regardless of the engine speed or size of the<br />
implement.<br />
It is controlled by a three-position rocker-switch on the<br />
operator station which can also be ‘braked on’ – preventing it<br />
moving during transport, or an ‘off’ position in which the shaft<br />
can be turned.<br />
Modern implements can be handled from the rear with ease,<br />
as all models in the series are built with the same rear axles as<br />
the latest advanced MF 5600 and MF 5700 S Series tractors.<br />
Special linkage arm sensors provide accurate and reliable draft<br />
and position control through Massey Ferguson’s well proven<br />
electronic hitch control (ELC), while epicyclic gears on the axle<br />
help ensure maximum engine power is transmitted to the<br />
ground, to maximise traction and performance.<br />
All three tractor ranges in the series have a simple opencentre<br />
hydraulic system, providing up to 98L/min on the larger<br />
MF5700 and MF6700 ranges. Thanks to its dual pump design<br />
– one provides internal services and the other allows the<br />
electronically-controlled rear linkage to lift 3,000kg, 4,300kg and<br />
5,200kg respectively.<br />
HANDLE ANYTHING<br />
The Global Series tractors can be bought fully front end loader<br />
ready – complete with loader subframe and factory integrated<br />
joystick – to allow for maximum manoeuvrability and easy<br />
maintenance access.<br />
The mechanical lever fitted on ST variants is ideal for basic<br />
loader work, while the optional Power Control lever is perfect<br />
for frequent loader use – bringing clutching and shuttling to your<br />
fingertips with Comfort Control.<br />
Van Kruining adds that high flow hydraulics and OEM design<br />
on the factory-integrated front end loader options give them<br />
“incomparable control and comfort”.<br />
In both the cab and ROPS variants, a profiled bonnet and dash<br />
profile improves visibility, while van Kruining adds that the new<br />
Visio roof option for the cab “provides incredible loader viewing<br />
and operation”.<br />
“We understand that for farmers, their tractor is their office,<br />
so that’s why the Global Series comes with a premium comfort<br />
cabin and one of the largest cabins on the market,” he says.<br />
“The cabin and controls are all based on the high end design<br />
from the existing higher horsepower ranges out of France, so<br />
there’s no compromising on quality, finishes or comfort in the<br />
Global Series cabins.”<br />
With a pillar-to-pillar distance of 1,300mm, the cab is designed<br />
to be roomy inside with large access on both sides and a flat<br />
floor on the MF 5700 and MF 6700 – while the MF 4700 has an<br />
ultra-low transmission tunnel.<br />
Frequently-used manually-operated controls, such as the hand<br />
throttle and gear and range levers, are located close to the<br />
driver’s seat, making them more comfortable to operate on a<br />
regular basis.<br />
More rarely used controls, such as work lights, starter key, ELC<br />
panel and rear windscreen wipers are located on the right hand<br />
B-pillar.<br />
Boasting excellent manoeuvrability, including tight turning<br />
angles, with a flexible range for a wide variety of applications,<br />
the Global Series is currently available from Massey Ferguson<br />
dealers across Australia.<br />
1. The range boasts excellent<br />
manoeuvrability, making them flexible<br />
range for a wide variety of applications<br />
2. All Global Series models offer an<br />
independent PTO clutch that helps to<br />
control the rate of engagement<br />
3. The cab is designed to be roomy inside<br />
with large access on both sides<br />
4. The Global Series comes with a premium<br />
comfort cabin, which is the largest cab<br />
on the market<br />
All Global Series engines<br />
have a long stroke design<br />
that provides high levels<br />
of torque across a broad<br />
speed range.<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 15
PRODUCT NEWS<br />
Left: The 2021 Mazda BT-50 ute will be<br />
available in the fourth quarter of this year<br />
suited up<br />
Matt Raudonikis gets<br />
an early look at the 2021<br />
Mazda BT-50, a new<br />
contender in the hotly<br />
contested one-tonne 4x4<br />
ute segment<br />
It won’t be on sale in Australia until the fourth quarter of 2020,<br />
but the team at Mazda has taken a different approach with the<br />
2021 Mazda BT-50 – not least through working with Isuzu.<br />
It’s no secret the new BT-50 shares its platform and drivetrain<br />
with the new 2020 Isuzu D-Max, after many years of sharing<br />
pick-up platforms with Ford.<br />
The 2021 BT-50 is essentially a reskin and refit on the Isuzu<br />
architecture, as Mazda gives the ute a more conservative look,<br />
with a broad grille and slimline headlights reminiscent of the<br />
company’s current passenger car and SUV range.<br />
Fog and marker lamp clusters low in the front bumper<br />
emphasise that broad appearance, while heavy castellated<br />
ridges running up the bonnet give a muscular look.<br />
Large tail-lights that wrap around the rear corners and a full<br />
width bumper complete the conservative look, with 18-inch<br />
(45.7cm) alloy wheels on the top-spec model and 16- and 17-<br />
inch (40.6 and 43cm) wheels on lower-spec models.<br />
Along with the glasshouse, roof and doors, the drivetrain is also<br />
shared with the new D-Max, which means the old five-cylinder<br />
Dagenham diesel has made way for the latest version of Isuzu’s<br />
venerable 4JJ 3.0-litre engine. In this trim it makes 140kW and<br />
450Nm, which is a drop from the old Ford engine’s 147kW and<br />
470Nm.<br />
That Ford five-cylinder might have been nice to drive but it was<br />
thirsty, so Mazda buyers will appreciate improved fuel efficiency<br />
of the Isuzu lump in what is also expected to be a lighter vehicle.<br />
Both six-speed automatic and manual transmissions will be<br />
available, with a traditional part-time four-wheel-drive system<br />
with high and low range. A rear diff lock is also included.<br />
Like other utes in this class, the new BT will have a 3,500kg<br />
towing capacity and upwards of a one-tonne payload,<br />
depending on the spec.<br />
Safety equipment will be top-notch, with AEB, radar cruise, lane<br />
departure warning and rear cross traffic alert all combining to<br />
deliver an expected five-star ANCAP rating.<br />
The interior has premium feel to it, in this top-spec model<br />
we sampled at least. Plenty of stitched leather on the seats<br />
and dash, a big nine-inch touchscreen in the centre of the<br />
dash, large functional buttons for many controls, and plenty<br />
of space inside.<br />
While Isuzu says the new D-Max is a step up in size from the<br />
old model, the BT-50 and Ranger were always bigger than the<br />
Isuzu ute. This new BT feels similar in size to the current model,<br />
both in the cabin and the tray.<br />
In the past, Mazda has always offered an extensive range of<br />
quality factory-backed accessories such as bullbars, lights, towing<br />
equipment and even a dual-battery system. It’s believed they are<br />
again working on such accessories and more for the new model,<br />
and you can bet the aftermarket brands will be too.<br />
goldacres<br />
16 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
Setting a new standard in<br />
Reach Arm Mowers<br />
Professional Range Mulchers<br />
For quality,reliability & durability insist on a Berti Mulcher<br />
PASTURE PASTURE ROADSIDE<br />
HEAVY<br />
DUTY<br />
Hydraulic driven<br />
mulchers to suit<br />
3.5 - 30t Excavators<br />
Skid & Track Steer<br />
Loaders<br />
50 - 120hp<br />
VINEYARD/ORCHARD<br />
ROADSIDE/ORCHARD<br />
FORESTRY<br />
Leading The Way In Vegetation<br />
Management Equipment<br />
www.agpride.com.au<br />
For your nearest dealer call<br />
02 4964 8818<br />
After Hours 0418 923 017
PRODUCT NEWS<br />
plenty of drive<br />
John Deere says updates<br />
to its upcoming modelyear<br />
2021 4-Series selfpropelled<br />
sprayers will<br />
reduce costs, provide<br />
better traction and boost<br />
operator comfort<br />
Above: Deere says the updates are<br />
focused on reducing input costs and<br />
maximising productivity for growers<br />
John Deere will incorporate the CommandDrive all-wheel drive<br />
system into the 2021 versions of its R4038 and R4030 selfpropelled<br />
sprayers as part of a series of upgrades.<br />
While already available on R4045 and R4060 sprayers, the<br />
addition of John Deere’s all-wheel drive system now allows<br />
operators of the R4038 and R4030 models to cover tricky terrain<br />
like hills, soft ground and wet surfaces more easily.<br />
For example, if one or more wheels lose traction, the sprayers’<br />
system adjusts to slow the slipping wheel and directs more flow<br />
to the other wheels with traction, propelling the machine over<br />
the terrain.<br />
It does this thanks to its powertrain, which uses a single<br />
hydrostatic pump that powers all four variable-displacement<br />
motors.<br />
John Deere production and precision agriculture tactical<br />
segment manager Marko Koelln says the updates will further<br />
boost producers’ ability to apply the right product at the right<br />
rate and the right time.<br />
“Reducing input costs and maximising productivity is critical to<br />
efficiency and profitability, and producers having greater control<br />
over the way they run their businesses,” Koelln says.<br />
“Through these changes, John Deere is not only providing<br />
optimised operator comfort but also helping to ensure we’re<br />
working with our customers to integrate features that have a<br />
direct impact on their bottom line.”<br />
John Deere’s CommandDrive works in tandem with the engine<br />
and sprayer system to automatically increase RPMs when more<br />
power is needed and to maintain proper spraying.<br />
Maintaining selected ground speed and application rate at<br />
lower engine RPMs is made easy thanks to the Auto Mode<br />
setting, which also automatically reduces the engine’s RPM<br />
to 900 when the machine is stopped. John Deere claims this<br />
reduces fuel consumption by RPM to 20 per cent.<br />
“The addition of flotation tyres can help to further reduce<br />
compaction to help farmers get in the paddock sooner and<br />
spray later while hitting tight application windows that can make<br />
a marked difference to yields,” Koelln adds.<br />
Other options include ExactApply, John Deere’s “industryexclusive”<br />
nozzle that minimizes overlap by controlling product<br />
application with individual nozzles, as well as AutoTrac Vision<br />
and RowSense options that offer a higher degree of accuracy for<br />
in-row crop applications using a camera or paddles.<br />
Koelln adds that Deere will also provide an upgraded carbon<br />
fibre boom option across the 4-Series as part of the update.<br />
“These upgrades include new T6 and T7 rope design, an<br />
additional breakaway bumper for more stability, new breakaway<br />
strap wear plate and new breakaway solenoid design to improve<br />
fold functionality,” he says.<br />
Orders for the new machines can be placed with John Deere<br />
dealers for delivery in late 2020 or early 2021.<br />
Left: Lemken will focus on developing its cultivation division<br />
with the help of Steketee, which it acquired two years ago<br />
Above: The Steketee Hacke cultivator<br />
Lemken quits sprayers<br />
The manufacturer will walk<br />
away from its sprayer arm<br />
after 10 years of operating<br />
in the segment<br />
German manufacturer Lemken will focus on crop care,<br />
cultivation and weed control, after announcing it will stop<br />
producing sprayers due to increasing regulatory requirements<br />
and lack of market relevance.<br />
Lemken chief executive Anthony van der Ley says that despite<br />
producing several new models for the most recent Agritechnica,<br />
the barriers for chemical crop care products were still getting<br />
higher.<br />
“After over 10 years operating in this segment, we have not<br />
reached a market-relevant size,” he says.<br />
“The legal requirements in each of our markets are increasing<br />
and becoming more and more disparate.<br />
“This means that there is no single Lemken field spraying<br />
standard that can meet our quality standards and the variety<br />
of customer preferences, with which we could achieve a<br />
satisfactory production run,” Van der Ley adds.<br />
The company says that farmers who own a Lemken field<br />
sprayer are guaranteed a continued supply of replacement parts<br />
as well as continued access to Lemken customer service, while<br />
customer orders will be accepted and fulfilled up until the end<br />
of the year.<br />
Moving forward, Lemken will focus on its mechanical weed<br />
control and selective crop care departments as well as its<br />
cultivation division, building on its acquisition of Dutch hoeing<br />
technology specialist Steketee two years ago.<br />
“Not only does Steketee offer a range of innovative hoeing<br />
technology, it also has the most intelligent camera technology<br />
on the market,” Van der Ley says.<br />
“We want to connect these machines to our digital solutions<br />
and make them adaptive.”<br />
Van der Ley says he sees an increasing demand for mechanical<br />
weed control with intelligent controls.<br />
“The environment is changing very fast right now, this is why<br />
farmers and contractors are now positioning themselves,<br />
whether they farm organically or conventionally, and are<br />
choosing the best model for them to be able to farm smartly<br />
and sustainably.”<br />
“It is a future theme for all of us, to ensure global food security<br />
despite environmental restrictions,” he adds.<br />
The company will repurpose its sprayer factory at Haren<br />
to assemble seed drills in order to meet what it says will be<br />
growing demand in seed drilling and precision seeding.<br />
It will also free up additional space at the company’s main<br />
site in Alpen for the production of soil cultivation equipment,<br />
Lemken says.<br />
18 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
number one<br />
option<br />
A recent upgrade has one<br />
WA farmer singing the praises<br />
of the Miller Nitro 7000 series<br />
Miller Nitro front-mounted sprayers have long been the<br />
preferred option of Reece Stratford’s family, which<br />
operates a wheat and barley farm in Minnivale, in Western<br />
Australia’s northern wheatbelt.<br />
The family upgraded last year from a 4365 model to a 7380<br />
machine to tackle annual ryegrass, wild radish and capeweed on<br />
their property – the third Nitro model that the family has bought.<br />
Using the sprayer with a 36m mono-boom, Stratford says he<br />
has seen the value of the upgrade almost straight away, with no<br />
issues after its first 600-hour service.<br />
“The hours on the older model were getting up there and it<br />
sucked a fair bit of fuel. If we did a full day of spraying, we would<br />
be coming back to fill up during the day,’’ he says.<br />
“With the new motor, we can spray for two days easily. The fuel<br />
efficiency is huge – and the money saved in fuel.’’<br />
The Miller Nitro 7380 has an IVECO power plant delivering 383<br />
peak horsepower (286kW) with 1459Nm of torque – with drive<br />
performance improved by a hydrostatic Danfoss pump system<br />
with electronically-controlled variable displacement piston<br />
drive motors.<br />
The drive motors supply greater torque at all speeds, while<br />
the weight distribution has been carefully designed to ensure it<br />
remains within four per cent of 50:50 balance during spraying.<br />
The Stratfords also transferred a granular mixing tank with their<br />
machine over to their mobile chemical trailer to prevent it from<br />
blocking vision, including of the centre nozzles on the boom.<br />
Automated filling and rinsing controls are also a standard<br />
inclusion with the Miller Nitro 7000 Series, ensuring maximum<br />
filling efficiency.<br />
“The drive is really nice and super quiet. It appears to have<br />
plenty of power. If you go through something like a boggy<br />
patch, it will put more torque through the hubs if needed,’’<br />
Stratford says.<br />
“We also have the wheels set at the widest width of about four<br />
metres for good stability and you can notice the difference.’’<br />
He said the new cab was spacious, well set-out and very<br />
comfortable, with big windows and two monitoring screens<br />
carefully placed for easy use.<br />
“You also have the same screen underneath the sprayer at the<br />
fuel point,” Stratford says.<br />
“You can control everything at that point without having to<br />
climb the ladder. You can open and shut the valves or rev it up<br />
or down.<br />
“Even the chair in the cab has also got air-ride suspension, so<br />
it’s very smooth going across the paddock,” he says.<br />
PRODUCT NEWS<br />
Top: Reece Stratford with McIntosh & Son<br />
Wongan Hills sales manager David Trindall<br />
with the Miller Nitro 7380 sprayer<br />
Above: Reece says the Miller Nitro 7380<br />
cab is spacious, well set-out and very<br />
comfortable, with large windows providing<br />
excellent vision and the drive smooth and<br />
quiet<br />
ONE PERSON, ONE TRACTOR<br />
JADAN COLLECTING &<br />
STACKING SOLUTIONS<br />
Jadan offers high-performance hay handling systems that are<br />
specifically designed for the farming market in Australia. These<br />
simple and robust machines create efficient and faster hay<br />
handling systems that take the sweat out of handling bales.<br />
BIG BALE STACKER<br />
ACCUMULATOR & GRAB<br />
1300 523 263 | www.jadan.net.au<br />
Scan here to watch videos,<br />
or visit www.jadan.net.au/videos<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 19<br />
FFM-HP-5168397-TS-375
PRODUCT NEWS<br />
JCB finds a home<br />
at Roylances<br />
Roylances Tractor<br />
Replacements has added<br />
JCB machinery to its<br />
lineup<br />
Left: The JCB 3CX compact<br />
PRO3 backhoe<br />
The news comes just a few months after Roylances<br />
announced it was the new Kubota dealer for the Forbes<br />
region of New South Wales.<br />
Roylances, which started out in the automotive and<br />
earthmoving industries before recently expanding into the<br />
agriculture market, says it’s excited about the addition of JCB<br />
machines to its offering.<br />
“JCB is amongst the top three manufacturers of construction<br />
equipment in the world,” company representative Justin<br />
Roylance says.<br />
“There are very few worksites around Australia you can drive<br />
past that wouldn’t feature the iconic JCB backhoe, but more<br />
than that, they have a fantastic range of tractors, excavators,<br />
wheel loaders, forklifts.<br />
“The list is extensive, stretching to 300 different products.<br />
We already have some monster machines on site, with the<br />
impressive 455ZX Wheel Loader arriving first, whilst we are<br />
expecting an 8330 Fastrac tractor (one of the fastest tractors on<br />
the market) within the next couple of days,” Roylance adds.<br />
“Aside from that we have received a 3CX elite backhoe – the<br />
3CX being the world’s number one selling backhoe – and<br />
a 155W wheeled skid steer loader, a machine which is very<br />
versatile and perfectly suited to tight worksites.<br />
“Overall, we’re excited by what JCB offers – they are a global<br />
organisation with a great support network around the world,<br />
specifically here in Australia – and they are committed to seeing<br />
the growth of the brand in this part of the country.”<br />
2020 has been a difficult year for many businesses due to<br />
COVID-19, but incentives like the Instant Asset Write Off Scheme<br />
will hopefully encourage customers.<br />
“The timing of the new arrivals is perfect given the government<br />
incentives on offer at the moment to allow farmers, trade<br />
and industry to upgrade or add to their fleet, whilst JCB CEA<br />
(Australia) is offering attractive financing options to make the<br />
purchase of a new machine as easy as possible,” Roylance says.<br />
“From our perspective, we’re receiving new machines every<br />
week, and working hard to build an inventory of parts and a<br />
workshop to provide service and maintenance for machines, so<br />
it’s full steam ahead, whether Kubota or JCB – it’s a very exciting<br />
time for Roylances.<br />
“The government regulations with respect to COVID-19 have an<br />
ongoing effect on the way we are operating,” Roylance adds.<br />
“We have all the necessary precautions in place, so we’re<br />
happy for people to come in and see the new JCB range,<br />
and we’re also looking to have machines available for site<br />
demonstrations too, so the local region will be seeing plenty of<br />
us over the coming months.”<br />
Green One<br />
GrainRite<br />
Self Propelled Augers<br />
are designed and built strong and tough in Australia<br />
for Australia’s demanding conditions. Finger tip<br />
hydraulic controls allow the operator to raise & lower<br />
each end, ground drive, and steer.<br />
Heavy duty barrel and frames reduces operation<br />
vibration considerably - less vibration means less grain<br />
damage. Reverse gear box with positive lock allows<br />
quick and easy cleanout.<br />
All our augers come standard with highway lighting,<br />
oversize sign, new 10 ply tyres, aluminium mud guards,<br />
fire extinguisher, drop spouts, cast iron pulleys, and<br />
many more features and options.<br />
GrainRite Augers have a 10.75” width barrel that is<br />
2.5mm thick. GrainRite Augers are available in 35’,<br />
50’ & 60’ lengths.<br />
FFM-HH-5014229-TS-314-XCC<br />
Call 03 5397 5200<br />
or email us at info@grainrite.com.au<br />
www.grainrite.com.au<br />
20 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
Fieldquip’s<br />
WITH YOUR<br />
909HD TOPPER<br />
PURCHSE*<br />
FREE BALE<br />
UNROLLER<br />
will save you<br />
time & money!<br />
IT IS WIN WIN AT<br />
FIELDQUIP THIS<br />
WINTER!<br />
Reward yourself with a<br />
909HD Major Pasture<br />
Topper today and we will<br />
reward you with a FREE 3<br />
point linkage Bale Unroller<br />
valued at $2,519.00<br />
For you this means better<br />
pasture, better yields, and<br />
better use of dry feed<br />
What a great combination,<br />
better pasture and better<br />
use of hay this winter.<br />
FREE CALL 1800 454 150<br />
www.fieldquip.com.au
INDUSTRY NEWS<br />
drought<br />
rebound<br />
Australian farms will<br />
produce more overall<br />
in 2020–21, but farmers<br />
will need to focus on<br />
restocking after years of<br />
drought, according to a<br />
government report<br />
Above: ABARES acting executive director<br />
Peter Gooday<br />
Australian agricultural production will be impacted more by<br />
the process of recovering after years of drought than from<br />
the effects of COVID-19, according to the latest report from the<br />
Australian Bureau of Agricultural and Resource Economics and<br />
Sciences (ABARES).<br />
In its June Agriculture Commodities report, ABARES predicts<br />
the value of farm production will increase “modestly” to $61<br />
billion in 2020–21, which acting executive director Peter Gooday<br />
says will be the third straight year over $60 billion.<br />
“This is driven by a strong forecast rebound in grain production,<br />
up 15 per cent to $30.8 billion,” he says.<br />
However, he adds that the higher production will coincide with<br />
a global economic slowdown – meaning most commodities will<br />
likely fall in value – with the exception of red meat, still boosted<br />
by the impact of African Swine Fever in Asia.<br />
“As we recover from drought, the value of farm exports is<br />
forecast to fall by around $2.7 billion to $44.4 billion in 2020–21,<br />
driven by falling meat exports and the rebuilding of domestic<br />
grain stocks,” he says.<br />
“Meat and live animal exports are forecast to fall by $3.5 billion<br />
and while exports of grain are expected to increase by almost<br />
$2.3 billion, over four million tonnes of the 2020–21 grain harvest<br />
is expected to be retained to rebuild domestic stocks.”<br />
The value of livestock production is forecast to fall 10 per cent<br />
to just above $30 billion, he says, adding that slaughter numbers<br />
will fall as graziers look to replenish their herds and flocks.<br />
The ABARES report also found that measures introduced to<br />
slow the spread of COVID-19 had had a significant impact on<br />
specialist horticultural, wine and other businesses.<br />
Labour intensive industries such as horticulture and wine had<br />
been affected by the costs of social distancing, while outbreaks<br />
in abattoirs and on ships had also affected the meat processing<br />
and live export industries.<br />
Woolgrowers were also affected, firstly by social distancing<br />
measures during shearing, while measures to contain the<br />
spread in the importing nations had affected yarn, textile and<br />
clothing manufacturers.<br />
Australia’s cotton industry would also have been significantly<br />
affected had the 2019–20 crop not been dramatically reduced by<br />
drought, ABARES says.<br />
Gooday adds that while the COVID-19 outbreak has tested the<br />
resilience of the industry, it had by and large adapted to the<br />
challenges.<br />
“Exporters of high-value seafood, wine and meat products<br />
did face significant impacts, but have also demonstrated<br />
adaptation by expanding online sales and marketing directly to<br />
households,” he says.<br />
“Demand for Australian exports of food staples remains<br />
relatively steady, and our industry has shown it can adapt as<br />
conditions change.”<br />
22 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
INDUSTRY NEWS<br />
crops up by half<br />
Production from Australian winter crops<br />
is expected to be up by 53 per cent on the<br />
previous year, according to the Australian<br />
Bureau of Agricultural and Resource<br />
Economics and Sciences<br />
Australia will produce 53 per cent more in its winter crops,<br />
such as wheat, barley and chickpeas, than it did last year,<br />
the Australian Bureau of Agricultural and Resource Economics<br />
and Sciences (ABARES) predicts.<br />
In ABARES’ June 2020 Australian crop report, the bureau says<br />
the amount of land planted has jumped 23 per cent this year for<br />
the 2020–21 season.<br />
Wheat production is forecast to increase by 76 per cent to 26.7<br />
million tonnes, barley is forecast to increase by 17 per cent to<br />
10.6 million tonnes and canola production is forecast to increase<br />
by 40 per cent to 3.2 million tonnes.<br />
Among other crops, chickpeas production is forecast to<br />
increase by 135 per cent to 661,000 tonnes and oats production<br />
is forecast to increase by 81 per cent to 1.6 million tonnes.<br />
ABARES acting executive director Peter Gooday says the<br />
season has gotten off to a good start, particularly in South<br />
Australia and the Eastern States.<br />
“Winter crop production is forecast be to be 44.5 million tonnes<br />
in 2020–21, which is 11 per cent above the 10-year average to<br />
2019–20,” Gooday says.<br />
“Yield prospects in New South Wales, Victoria and South<br />
Australia are forecast to be above average given favourable<br />
levels of soil moisture at the beginning of June and the likelihood<br />
of above average rainfall in July.”<br />
Yields in Western Australia are expected to be around average,<br />
assuming average and timely rainfall starting in July and<br />
continuing through spring – with the Bureau of Meteorology<br />
predicting June rainfall will be below average.<br />
ABARES says 22.5 million hectares of winter crops will be<br />
planted across Australia in 2020–21, which is five per cent above<br />
the 10-year average to 2019–20 of 21.4 million hectares.<br />
“The majority of this increase is expected to be in New South<br />
Wales, where seasonal conditions so far are much more<br />
favourable than during the last two winter crop seasons,”<br />
Gooday says.<br />
For the major winter crops, area planted with wheat is forecast<br />
to increase by 27 per cent to almost 13 million hectares, eight<br />
per cent above the 10-year average to 2019–20 of 12 million<br />
hectares.<br />
Area planted with barley is forecast to increase by eight per<br />
cent to almost 4.4 million hectares, also eight per cent above the<br />
10-year average to 2019–20.<br />
“Falls in barley prices in early May occurred in the midst of<br />
planting, but did not significantly change planting intentions in<br />
the eastern states, with many producers maintaining planned<br />
crop rotations,” Gooday says.<br />
Above: Yield prospects in New<br />
South Wales, Victoria and South<br />
Australia are forecast to be above<br />
average<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 23
INDUSTRY NEWS<br />
upbeat outlook<br />
Uncertainty about trade,<br />
the global economy and<br />
impacts on commodities<br />
– such as wool, beef and<br />
barley – has brought<br />
farm sentiment back from<br />
historic highs recorded<br />
earlier in the year<br />
Above: Cotton growers were the most<br />
optimistic group of farmers in the most<br />
recent Rabobank Rural Confidence Survey.<br />
Image courtesy Alamy.<br />
<strong>Farm</strong>ers are still upbeat about the future outlook for<br />
agriculture and their own businesses in 2020, according to<br />
the latest Rabobank Rural Confidence Survey, released in June.<br />
The survey, which takes in the view of about 1,000 primary<br />
producers across Australia on a quarterly basis, found 33 per<br />
cent of farmers were expecting conditions in the agricultural<br />
economy to improve in the 2020-21 financial year.<br />
This was a fall from the 46 per cent who expressed a positive<br />
view in the March quarter, while the numbers of those expecting<br />
things to get worse increased from 15 per cent to 23 per cent<br />
in June.<br />
Of those, 47 per cent were most worried about a fall in<br />
commodity prices, while the impact of COVID-19 was identified<br />
by another 28 per cent of producers as a reason to be<br />
pessimistic.<br />
Rabobank Australia CEO Peter Knoblanche says better<br />
seasonal conditions and good commodity prices led to a boost<br />
in confidence despite the COVID-19 outbreak – with the survey<br />
saying only 8 per cent had experienced a “major negative<br />
impact” due to the disease.<br />
Among farmers, the survey found cotton growers were the<br />
most optimistic, with 44 per cent expecting an improvement, up<br />
from 27 per cent in March.<br />
This follows strong autumn rainfall in the Murray-Darling Basin<br />
coupled with a positive winter rainfall outlook.<br />
Grain growers were also optimistic, with 42 per cent of growers<br />
nationally reporting an improvement in business sentiment, and<br />
beef producers were 35 per cent positive, but 31 per cent of<br />
surveyed dairy farmers expected conditions to worsen.<br />
Poor wool prices meant sentiment among sheep growers fell –<br />
with 23 per cent expecting an improvement (down from 36 per<br />
cent in March) and 36 per cent expecting things to get worse –<br />
up from 18 per cent.<br />
Knoblanche says forecasts predict a bumper winter harvest,<br />
which will be positive news for crop growers.<br />
“Livestock rebuilding is also underway and confidence<br />
among beef and sheepmeat producers is generally very good,<br />
particularly in light of excellent prices at the moment,” he says.<br />
Another 33 per cent of respondents expect a rise in gross farm<br />
income over the next 12 months – compared with 38 per cent<br />
in the last quarter – though this number rises to 49 per cent of<br />
grain farmers.<br />
Nationwide, 25 per cent of those farmers surveyed plan to<br />
invest further in their business, with the bulk of investment was<br />
earmarked for on-farm infrastructure.<br />
Knoblanche says this is a sign of underlying farm confidence in<br />
the year ahead and beyond.<br />
“With seasonal conditions on the side of the farm sector this<br />
year, farmers are looking forward to increased returns and being<br />
able to invest in their enterprises,” he says.<br />
Reliable sales & fast service in Small Bale Handling Equipment<br />
15 Bale<br />
Accumulator<br />
includes Baler<br />
Towbar, Baler<br />
Hydraulic Kit &<br />
Wiring Harness<br />
Heavy duty stick rakes<br />
made to order<br />
NEW REBEL TAUTLINER GRAB IS HERE<br />
Fill Tautliner trailers to the roof. Slim<br />
design for tight spaces. Heavy duty<br />
design. 10 and 15 Bale available.<br />
15 Bale Grab<br />
includes<br />
Hydraulic Ram,<br />
Hydraulic Hoses<br />
and Side Rail<br />
FFM-HH-5168768-TS-387<br />
We won’t be beaten on price!<br />
For all enquiries phone Nic 02 6852 2049 or check www.rebelequipment.com.au<br />
24 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
02 4423 3499<br />
After Hours 0429 233 577<br />
sales@elgra.com.au www.elgra.com.au<br />
21 Central Ave, South Nowra, NSW, 2541<br />
HYDRAULIC PERCUSSION<br />
POST DRIVERS FOR TRACTOR,<br />
SKIDSTEER & FEL<br />
Cement<br />
Mixer<br />
(Paddle)<br />
2 Sizes available,<br />
Suit Skid Steer,<br />
Excavator, 3PL, FE<br />
From<br />
$5,990 + GST<br />
PDX<br />
Series<br />
5 Cell Options,<br />
Suit Skid Steer,<br />
Excavator,<br />
FEL or any<br />
wheeled<br />
loader.<br />
From<br />
$5,600 + GST<br />
89<br />
Series<br />
Driver<br />
Available in 2.5<br />
(Standard) & 3.6<br />
(Hi Lift) under<br />
the Anvil, 4 Cell<br />
Options From<br />
From<br />
90<br />
Series<br />
Driver<br />
Designed<br />
specifically<br />
for Skid Steer,<br />
Excavator, FEL<br />
or any wheeled<br />
loader. 4 Cell<br />
Options.<br />
From<br />
$14,450 + GST $15,950 + GST<br />
FFM-FP-5034644-TS-381<br />
Australia’s most POWERFUL & VERSATILE Percussion Driver<br />
***All El-Gra Post Drivers comply with Work Cover and other State laws.***
EVENT NEWS<br />
events calendar<br />
Here are a list of events<br />
in the coming months,<br />
including info on events<br />
postponed. Information<br />
was current as of going<br />
to press<br />
Ag-Grow Field Days – Emerald<br />
Ag-Grow dates back to 1989, servicing central Queensland<br />
with some of the best the agriculture and mining sectors.<br />
Attracting over 1,500 companies and crowds in excess of<br />
28,000 visitors Ag-Grow is more than a field day – it is a<br />
complete marketing package.<br />
WHEN: August 6-8, 2020<br />
MORE INFO: www.aggrow.com.au<br />
Riverina Field Days – Griffith<br />
Riverina Field days is held at the Griffith Showgrounds and<br />
attracts over 5,000 people each year. The event showcases<br />
the best agricultural machinery and products from the<br />
region.<br />
WHEN: September 4-5, 2020<br />
MORE INFO: http://riverinafielddays.com<br />
Saputo Dairy Expo – Korumburra<br />
The Saputo Dairy Expo provides an opportunity for members<br />
of the dairying fraternity to be able to showcase the latest in<br />
dairy innovation and technology to local farmers.<br />
WHEN: September 9-10, 2020<br />
MORE INFO: www.dairyexpo.org.au/home<br />
Primex Field Days – Casino<br />
Positioned as being ‘Australia’s sustainable farming<br />
expo’, Norco Primex has evolved from a localized event to<br />
becoming one of the country’s leading primary industries<br />
expos. It now boasts in excess of 1,000 different companies<br />
on show and more than 25,000 visitors across its three days.<br />
WHEN: September 10-12, 2020<br />
MORE INFO: www.primex.net.au<br />
Berry Small <strong>Farm</strong> Field Days – Berry<br />
Held at one of the most attractive showgrounds in NSW, the<br />
Berry Small <strong>Farm</strong> Field Days is one of the cutest field days<br />
on the Australian calendar. With equipment and machinery<br />
displays, demonstrations and farm animals galore, the Berry<br />
Small <strong>Farm</strong> Field Days is an event for everyone!<br />
WHEN: September 11-12, 2020<br />
MORE INFO: www.berryrotary.org.au/small-farm-field-day<br />
Riverland Field Days – Barmera<br />
Held over a two day period, the Riverland Field Days<br />
are a staple in the region. With over 350 exhibitors and<br />
approximately 30 caterers, there is something for the whole<br />
family. The field days include the latest in agricultural<br />
machinery, equipment and services, demonstrations,<br />
information sessions, activities, entertainment, tastings,<br />
trade exhibits and much more.<br />
WHEN: September 18-19, 2020<br />
MORE INFO: www.riverlandfielddays.com.au<br />
Perth Royal Show – Perth<br />
The Perth Royal Show is an annual agricultural show held<br />
in Perth, Western Australia at the Claremont Showground.<br />
It features informational exhibits, agricultural competitions<br />
and display animals, a fairground and rides, and showbags.<br />
WHEN: September 26-October 3, 2020<br />
MORE INFO: www.perthroyalshow.com.au<br />
Diesel Dirt & Turf – Sydney<br />
Diesel Dirt & Turf Expo is a family-friendly event that<br />
showcases the biggest range of earthmoving machinery<br />
dealers, earthmoving attachments, trucks, bikes, utilities,<br />
mowing equipment and much, much more. New location at<br />
Sydney Dragway (see p28).<br />
WHEN: October 16-18, 2020<br />
MORE INFO: www.dieseldirtandturf.com.au<br />
For the full year’s calendar of events: www.tradefarmmachinery.com.au/events<br />
AVAILABLE NOW, NATION WIDE.<br />
FROM YOUR LOCAL DIECI DEALER.<br />
26 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
EVENT NEWS<br />
1<br />
2<br />
3<br />
back in the game<br />
New time, new venue<br />
for Australia’s biggest<br />
industry event<br />
1. The PW628 Kanga loader<br />
2. The Auger Torque Hydraulic<br />
Hammer SB250<br />
3. ShawX Manufacturing general<br />
purpose bucket<br />
See the latest technology<br />
for excavators, loaders,<br />
mowers, grounds<br />
maintenance equipment,<br />
trailers, trucks, and<br />
associated services.<br />
The National Diesel Dirt & Turf Expo is on the move. After its<br />
first four great years at the Panthers Penrith, residential<br />
development on the Panthers site meant a new home for the<br />
national Diesel Dirt & Turf Expo was needed.<br />
After being postponed from its originally scheduled May event,<br />
the 2020 Expo is being staged from October 16-18 at the Sydney<br />
Dragway.<br />
Conveniently located at Ferrers Road, the move to the new<br />
Sydney Dragway has been warmly welcomed by exhibitors who<br />
appreciate the many benefits of the site.<br />
Benefits include 8.4 hectares of flat, all-weather asphalt<br />
surface, easy access to power and other infrastructure,<br />
expansive car parking, a great machinery demonstration site<br />
and indoor pavilion facilities of a similar size and configuration<br />
as those at Penrith.<br />
Expo manager Marti Zivkovich says the sponsors and<br />
exhibitors have responded positively to the change in venue.<br />
“This is a great chance to adopt a new improved and fresh look<br />
to what is already Australia’s most successful earthmoving Expo<br />
to accommodate the growing number of exhibitors and the need<br />
for larger sites to exhibit machinery and services,” she says.<br />
HUGE AREA FOR BIGGER EXHIBITS<br />
The new expo area is large enough to accommodate the<br />
demands of a number of exhibitors who were looking to expand<br />
their stand space, she adds.<br />
“Exhibitors who have taken indoor stands previously are also<br />
pleased to see we have the same area in the entry pavilion at<br />
the Dragway,” Zivkovich adds.<br />
“We are particularly pleased with the fact we are no longer<br />
reliant on the whims of the weather as far as the challenge of<br />
getting equipment bogged or damaging surfaces in the event of<br />
wet weather.”<br />
Expansive free parking areas are adjacent to the Expo site, and<br />
people who are not up to a short walk to the entrance can catch<br />
the non-stop shuttle service.<br />
Exhibitors will fully appreciate the 24-hour bump-in bump-out<br />
facility, together with excellent outdoor lighting and security<br />
which will enable them to quickly move their equipment and<br />
exhibition structures in and out in the most efficient manner.<br />
BACK IN 2020<br />
Despite the change in time and venue, this year’s Diesel Dirt &<br />
Turf Expo will have many of the events regular attendees know<br />
and love – not least of which is the “Operators Challenge”.<br />
This popular event has become a real crowd pleaser with any<br />
operator being able to enter the excavator or loader challenge<br />
with the chance to win big cash prize.<br />
Sessions are run every day and visitors enjoy watching the<br />
fierce competition and the chance to win the prestigious trophy<br />
that comes with the prize money.<br />
The Pickles auction, which has become a popular part of Diesel<br />
Dirt & Turf, will also be on again this year with a huge range of<br />
gear on offer.<br />
Also back for 2020 is the popular Freestyle Kings motor bike<br />
stunt team, Little Big Rigs, music entertainment, licensed bar and<br />
facilities. Accommodation for exhibitors and visitors throughout<br />
the three-day event is readily available, with numerous hotels<br />
within easy reach of the Expo site. Some accommodation venues<br />
will also have regular shuttle services to the Expo for exhibitors.<br />
YOU CAN’T AFFORD TO MISS THIS EXPO<br />
With construction and infrastructure works on the increase as a<br />
result of government investment incentives, it is more important<br />
than ever to attend the National Diesel Dirt & Turf Expo.<br />
While some businesses have slowed down, for companies<br />
such as earthmoving attachments manufacturer ShawX<br />
Manufacturing the opposite have proven true.<br />
“Our business has not been badly affected by the COVID-19<br />
situation, and we have many customers whose business is<br />
unaffected in the current environment,” the company’s Donna<br />
Shaw says.<br />
“Our whole sales team is servicing inquiries and production<br />
running at full capacity. Based on current indications, that<br />
situation should remain.<br />
“The majority of our market is commercial construction<br />
and that market has a strong demand for the tools that we<br />
manufacture,” she says.<br />
Fellow attachment manufacturer Lionel Smitka of Digga and<br />
Kanga agrees, saying construction projects are showing no<br />
signs of slackening off and are likely to continue for the<br />
foreseeable future.<br />
“Part of the reason for this may be that many people are<br />
staying at home and undertaking their home improvement<br />
projects that may have been planned for some time,” he says.<br />
“Our Kanga customers, who are predominantly smaller<br />
contractor businesses, are as busy now as they have ever been<br />
and this trend shows no sign of slackening off. Similarly, medium<br />
sized businesses and other companies who are involved in civil<br />
works are also very busy, with demand for equipment remaining<br />
very buoyant.<br />
“Basically, our Australian business has been unaffected by the<br />
coronavirus situation and we see the strong demand remaining<br />
for the foreseeable future,” he says.<br />
ALL BRANDS BIG AND SMALL<br />
The National Diesel Dirt & Turf Expo is Australia’s premier<br />
earthmoving industry event which continues to attract support<br />
from all market sectors in earthmoving, infrastructure, residential<br />
development, public works and public space management.<br />
Many major earthmoving brands will be presenting their latest<br />
releases and visitors will benefit from checking out earthmoving<br />
machinery, attachments, GPS and digital management systems,<br />
accessories, and finance.<br />
Here is where you will see you everything you need for site<br />
preparation, excavation, landscapes, infrastructure, and public<br />
spaces. There is the latest technology for excavators, loaders,<br />
mowers, grounds maintenance equipment, trailers, trucks, and<br />
associated services.<br />
Everything you need to know is available at<br />
www.dieseldirtandturf.com.au.<br />
28 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
Agricultural<br />
Tipping Trailers<br />
Slurry Tanks<br />
Muck Spreaders<br />
www.joskin.com.au<br />
Imported by Colac Agricultural Company P/L<br />
Colac, Victoria 03 5231 6999<br />
V-Twin Basket Rakes<br />
upto 9.5m raking Width<br />
Trailed and Tube Bale Wrappers<br />
Wraps bales up to 1.8 mts in diameter and 1600 kg<br />
Contact your local dealer for more information<br />
O’Connors<br />
• Bordertown SA<br />
• Condobolin NSW<br />
• Corowa NSW<br />
• Forbes NSW<br />
• Grenfell NSW<br />
• West Wyalong NSW<br />
• Birchip VIC<br />
• Horsham VIC<br />
• Shepparton VIC<br />
• Warracknabeal VIC<br />
Days <strong>Machinery</strong><br />
• Casino<br />
Central Hills <strong>Machinery</strong><br />
Traders<br />
• Mount Barker SA<br />
Geronimo<br />
• Dubbo NSW<br />
• Walgett NSW<br />
• Moree NSW<br />
• Northam WA<br />
JGW<br />
• Cowra NSW<br />
TTMI<br />
• Trafalgar VIC<br />
• Maffra VIC<br />
• Leongatha VIC<br />
• Longford TAS<br />
SEQ<br />
• Kalbar QLD<br />
Greg Allan <strong>Farm</strong> <strong>Machinery</strong><br />
• Colac VIC<br />
• Wagga Wagga NSW Jakab Motors<br />
• Cohuna VIC<br />
Milne Brothers<br />
• Rockhampton QLD<br />
• Emerald QLD<br />
• Biloela QLD<br />
• Mackay QLD<br />
Honeycombes<br />
• Ayr QLD<br />
• Cairns QLD<br />
• Ingham QLD<br />
• Innisfail QLD<br />
• Tolga QLD<br />
• Townsville QLD<br />
www.elhoaustralia.com.au<br />
Imported by Colac Agricultural Company P/L<br />
Colac, Vic 0352316999
MARKET NEWS<br />
Left: Demand in the horticultural space saw 100–200hp<br />
tractors, such as this 115hp Case IH <strong>Farm</strong>all C, experience<br />
a demand surge<br />
may sales boom<br />
Tractor sales lifted in May, according to the latest data from the<br />
Tractor and <strong>Machinery</strong> Association of Australia<br />
Gary Northover is executive<br />
director of the Tractor & <strong>Machinery</strong><br />
Association of Australia (TMA).<br />
He can be contacted on<br />
(03) 9813 8011 or<br />
at gary@tma.asn.au<br />
Australian tractor sales lifted for the third consecutive month<br />
as the industry, driven by better weather prospects and<br />
the increase in the Instant Asset Write Off program to $150,000,<br />
continues to manage its way through the COVID-19 pandemic.<br />
While the full impact of COVID-19 on the supply pipeline is still<br />
to play out, the industry has resumed a solid level of activity<br />
after a torrid two year period, thanks to good weather and<br />
strong demand for commodities, even despite some trade<br />
tensions with China.<br />
Nationwide tractor sales are up 30 per cent year on year for<br />
May and are now 12 per cent ahead on a year to date basis.<br />
Huge lifts were once again seen in all eastern states, with<br />
Victoria continuing to flourish, up another 32 per cent on the<br />
same month last year and now 24 per cent ahead for 2020.<br />
NSW was again up 38 per cent for the month, now 12 per cent<br />
up year to date and Queensland had another strong month,<br />
rising 34 per cent compared to last May and sitting 10 per cent<br />
ahead of last year.<br />
The improvement in South Australia continues, 13 per cent<br />
up for the month and now 16 per cent ahead of last year, while<br />
Tasmania reported another strong month and is now 21 per cent<br />
ahead for the year.<br />
Western Australian tractor sales also turned upwards for the<br />
first time in a while, 7 per cent up for the month and 11 per cent<br />
down YTD.<br />
Looking at demand via horsepower, the 100 to 200hp (75–<br />
150kW) category leads the way, with sales up 60 per cent in May<br />
and 31 per cent for the YTD.<br />
The strength in the horticultural space is having a big impact<br />
on demand for this range, strongly supported by the financial<br />
incentives in place.<br />
The under-40hp (30kW) range was up 16 per cent for the month<br />
and now sits 5.6 per cent ahead for the year to date.<br />
The 40 to 100hp (30–75kW) range was again up strongly 39 per<br />
cent, now 9 per cent ahead for the year, and the 200hp (150kW)<br />
and above range dipped 13 per cent for the month and is now 7<br />
per cent behind year to date.<br />
With regards to other products, sales of combine harvesters<br />
have effectively stalled with very few sales completed in May<br />
and the outlook still subdued.<br />
While there are encouraging signs of a return to grain planting<br />
activity, which will ultimately lead to harvesting, meaningful<br />
demand for new harvesters is still a fair way off.<br />
Baler sales continue to be very strong up 10 per cent year to<br />
date, whilst sales of out front mowers dipped but remain 16 per<br />
cent ahead of the same time last year.<br />
BYPY TRANSMISSIONS<br />
PTO Shafts and Gearboxes<br />
For all your power transmission requirements<br />
HORSEPOWER: 12 Hp TO 360 Hp - We have the best range in Australia<br />
We also stock an extensive<br />
range of spare parts for PTO<br />
shafts and gearboxes<br />
Call Toll Free 1800 932 113<br />
bypy@bypy.com.au | www.bypy.com.au<br />
BYPY Transmissions-Australian Distributor of Bondioli & Pavesi and BIMA<br />
FFM-HH-5190089-TS-369<br />
30 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 31<br />
Hay Handling, think Muller...<br />
SEASON<br />
SALE OFFERS<br />
FROM $4.5K!<br />
ACCUMULATORS<br />
6 TO 15 FOOT SLASHERS<br />
MANUFACTURED IN AUSTRALIA<br />
TO AUSTRALIAN STANDARDS<br />
CHASER BIN<br />
GRABS<br />
07 3085 2987<br />
sales@mullerfab.com.au<br />
www.mullerfab.com.au
32 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
AGRISON<br />
www.agrison.com.au<br />
WHEEL LOADERS<br />
DIESEL GENERATORS<br />
15 KVA<br />
25 KVA<br />
37.5 KVA<br />
50 KVA<br />
62.5 KVA<br />
80 KVA<br />
$5,990 inc GST $6,990 inc GST $7,990 inc GST $9,990 inc GST<br />
$10,990 inc GST $11,990 inc GST<br />
Calculate Your Power First: www.generatorcalculator.com.au<br />
100 KVA<br />
125 KVA<br />
150 KVA<br />
200 KVA<br />
250 KVA<br />
450 KVA<br />
$13,990 inc GST $14,990 inc GST $16,990 inc GST $19,990 inc GST $24,990 inc GST<br />
TX920L<br />
TX930L<br />
TX930LX<br />
$21,990 $25,990<br />
$28,990<br />
INC GST<br />
INC GST<br />
INC GST<br />
$55,990 inc GST<br />
FREE<br />
FREE<br />
FREE<br />
4 IN 1<br />
BUCKET<br />
4 IN 1<br />
BUCKET<br />
4 IN 1<br />
BUCKET<br />
FREE<br />
FORKS<br />
FREE<br />
GENERAL<br />
BUCKET<br />
TX932L<br />
$39,990<br />
INC GST<br />
Fully Articulated<br />
1500 KG Lift Capacity<br />
ROPS/FOPS - Approved Cabin<br />
Powershift Transmission<br />
Air Conditioned Cabin<br />
Quick Hitch<br />
COMES WITH<br />
FREE 4 IN 1<br />
BUCKET, GENERAL<br />
BUCKET, FORKS<br />
FREE<br />
FORKS<br />
FREE<br />
GENERAL<br />
BUCKET<br />
Fully Articulated<br />
2000 KG Lift Capacity<br />
ROPS/FOPS - Approved Cabin<br />
Powershift Transmission<br />
Air Conditioned Cabin<br />
Quick Hitch<br />
TX936S<br />
$69,990<br />
COMES WITH<br />
FREE 4 IN 1<br />
BUCKET, GENERAL<br />
BUCKET, FORKS<br />
INC GST<br />
FREE<br />
FORKS<br />
FREE<br />
GENERAL<br />
BUCKET<br />
Fully Articulated<br />
2200 KG (SWL) Lift Capacity<br />
ROPS/FOPS - Approved Cabin<br />
Powershift Transmission<br />
Air Conditioned Cabin<br />
Quick Hitch<br />
COMES WITH<br />
FREE 4 IN 1<br />
BUCKET, GENERAL<br />
BUCKET, FORKS<br />
FREE<br />
4 IN 1<br />
BUCKET<br />
FREE<br />
FORKS<br />
FREE<br />
GENERAL<br />
BUCKET<br />
Fully Articulated<br />
2800 KG Lift Capacity<br />
ROPS/FOPS - Approved Cabin<br />
Powershift Transmission<br />
Air Conditioned Cabin<br />
Quick Hitch<br />
COMES WITH<br />
FREE 4 IN 1<br />
BUCKET, GENERAL<br />
BUCKET, FORKS<br />
FREE<br />
4 IN 1<br />
BUCKET<br />
FREE<br />
FORKS<br />
FREE<br />
GENERAL<br />
BUCKET<br />
Fully Articulated<br />
4000 KG Lift Capacity<br />
ROPS/FOPS - Approved Cabin<br />
Powershift Transmission<br />
Air Conditioned Cabin<br />
Quick Hitch<br />
COMES WITH<br />
FREE 4 IN 1<br />
BUCKET, GENERAL<br />
BUCKET, FORKS<br />
AGRISON<br />
www.agrison.com.au<br />
Call 1300 651 830<br />
A: 2098-2108 Hume Highway,<br />
ISO CERTIFIED COMPANY<br />
Campbellfield, VIC 3061<br />
E: contact@agrison.com.au AgrisonTractor AgrisonTractors agrisontube<br />
* Conditions apply. Offers are available while stocks last. All prices GST inclusive. Freight is additional. Finance available to approved applicants. Pictures shown are for illustrative purposes only.
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 33<br />
AGRISON<br />
Call 1300 651 830<br />
www.agrison.com.au<br />
Australia’s Number 1 Leader<br />
40hp CDF<br />
60hp CDF<br />
$25,990 inc GST*<br />
$17,990 inc GST*<br />
40hp CDF<br />
70hp CDF<br />
$18,990 inc GST*<br />
Cabin Tractor, 4WD, Front End Loader, 4ft or 6ft slasher *excludes Aircon<br />
$30,990 inc GST*<br />
Cabin Tractor, 4 in 1 bucket, 6 FT slasher, Air Con<br />
100hp CDF<br />
120hp / 140hp / 180hp CDF<br />
From $39,990 inc GST*<br />
4WD, Front End Loader, 4 in 1 bucket, Cabin with Air con, Ag Tyres<br />
Nationwide Delivery. Finance Available<br />
From $44,990 inc GST*<br />
4WD, 4 in 1 bucket, Front End Loader, Cabin with Air Con, Ag Tyres<br />
AGRISON<br />
www.agrison.com.au<br />
Call 1300 651 830<br />
A: 2098-2108 Hume Highway,<br />
ISO CERTIFIED COMPANY<br />
Campbellfield, VIC 3061<br />
E: contact@agrison.com.au AgrisonTractor AgrisonTractors agrisontube<br />
* Conditions apply. Offers are available while stocks last. All prices GST inclusive. Freight is additional. Finance available to approved applicants. Pictures shown are for illustrative purposes only.
OPINION<br />
1<br />
2<br />
3<br />
going global<br />
The new farm machinery<br />
brands<br />
Trevor Whittington – CEO WA<strong>Farm</strong>ers<br />
1. Rostselmash is considering import options<br />
for its Torum harvester – here pictured is its<br />
2009 model<br />
2. The Kirovets K739 tractor on display at the<br />
annual Volga agro-industrial exhibition in<br />
September last year. Image courtesy Alamy<br />
3. Eyes on the prize: Russian President<br />
Vladimir Putin inspects the cockpit of the<br />
Torum 785 harvester, during a tour of the<br />
Rostselmash agricultural machinery<br />
factory in 2018. Image courtesy Alamy<br />
It is likely we will see these<br />
manufacturers move<br />
to begin supplying the<br />
Australian market.<br />
Many older farmers will remember the days when<br />
Australia manufactured tractors and harvesters. Some<br />
may even have heard of one of our greatest farmer inventors,<br />
Headlie Taylor, who designed both our first combine harvester in<br />
1914 and our first self-propelled header, the Sunshine W model,<br />
in 1924.<br />
However, by the 1990s, the abolition of protective tariffs<br />
combined with increasing international competition resulted<br />
in local tractor and harvester manufacturers being run out of<br />
business.<br />
NEW PLAYERS<br />
Today, almost all the global brand names of big farm machinery<br />
that we are familiar with originate in design out of either Europe<br />
or North America.<br />
Many of these global manufacturing companies still make the<br />
majority of their equipment in the country of origin, but there<br />
is an increasing move to establish plants in other parts of the<br />
world, particularly in our competitor grain growing nations.<br />
In fact, it’s not hard to find a major manufacturer today<br />
who does not have factories building big farm gear in South<br />
America or Eastern Europe. Only China seems to be left off<br />
the list, in part because it has so many of its own brands of<br />
tractors and headers.<br />
However, the green, red, yellow and black are not the only<br />
ag machinery companies that are busy globalising their<br />
manufacturing operations. The Russian manufacturers have<br />
woken up and are back in the export game in a big way.<br />
In Australia, they are now marketing the Kirovets TMZ 420hp<br />
(313kW) tractor with a Russian-designed engine for $250,000<br />
landed and their biggest model powered by a Mercedes 428hp<br />
(319kW) engine is listed at $285,000, about 60 per cent the cost<br />
of any tractor of equivalent power.<br />
Rostselmash, based in Rostov in the heart of the Russian<br />
wheat belt, builds a very high-tech machine using imported<br />
Mercedes or Cummins engines and global parts, which is<br />
cheaper than any of the North American tractors but more<br />
expensive than the Kirovets. It is also looking to bring in its<br />
harvesters including the class 10 Torum 770 tracked machine<br />
running a 650hp (485kW) engine at a big discount to the new<br />
John Deere, Case, and NH options.<br />
The company has also gone the other way and moved to<br />
establish a presence in Canada, having purchased Versatile<br />
back in 2007 then moved the manufacturing of its2375<br />
(375hp/280kW) model to Russia.<br />
Further to this, it is now badging some of its own Russiandesigned<br />
and made headers with the Versatile brand for sale to<br />
both the European and American markets.<br />
This is a clear signal of the emergence of the relatively<br />
unknown manufacturers of big ag equipment onto the<br />
global marketplace. Another example is the Finnish Sampo<br />
Rosenlew brand that is a manufacturer of medium high-tech<br />
sized harvesters, which have recently seen the giant Indian<br />
manufacturer Mahindra take up a 35 per cent stake in it, with<br />
plans to take its machines global.<br />
With both Mahindra and Versatile having well-established<br />
service and supply chain networks into Australia, it is likely<br />
we will see these manufacturers move to begin supplying the<br />
Australian market with the Rostselmash and Sampo brands<br />
sometime in the near future.<br />
Other big global manufacturers of large headers and tractors<br />
that are looking at Australia as a future market include<br />
Gomselmash from Russia, which makes harvesters, and AGRICO<br />
from South Africa, which make big four wheel drive tractors.<br />
In addition, there is a long list of Argentinian self-propelled<br />
sprayer manufacturers such as Caiman and PLA, which<br />
have gone global. Brazilians already have all the big brand<br />
global manufacturers producing locally plus its own homegrown<br />
designs, including Stara, which builds self-propelled sprayers<br />
and large front wheel drive tractors with exports to 35 countries.<br />
With over 100 tractor makers, China is rapidly increasing<br />
the size of the equipment produced. For example, Xuzhou<br />
Kat recently launching a 440hp (328kW) four wheel drive tractor<br />
at US$103,000. At the other end of the scale is its headers, one<br />
of the biggest being the Zhonglian 100kW model, but it looks<br />
about the same size as the old Inter 711 and sells for about<br />
the same price as when they were first launched back in 1977:<br />
US$20,000.<br />
BENEFITS TO AUSSIE FARMERS<br />
Any new entrant into the ag machinery sector is good for<br />
Australian farmers, as it will help drive down the cost of<br />
expensive machinery, which is important for our long-term<br />
competitive viability.<br />
However, no new entrant is going to stay in Australia if our<br />
farmers are not prepared to have an open mind to buying<br />
unknown brands.<br />
The global message is if Argentina and the Black Sea are<br />
utilising cheaper horsepower to grow their crops and keep their<br />
costs down, then our farmers will also need to be prepared to<br />
look further than the well-known North America or European<br />
brands.<br />
34 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
TYRE FEATURE<br />
Left: Tianli Agro Grip tyres are<br />
particularly popular at farms with high<br />
rainfall<br />
wet weather wonder<br />
Tianli Tyres’ Agro Grip<br />
range has won a number<br />
of fans in Victoria’s wet<br />
weather regions, and the<br />
brand is looking to go<br />
national<br />
Tianli Tyres’ Agro Grip range has won a number of admirers<br />
across Victoria since local distributor Spider GT introduced<br />
the range to distributors in Warrnambool, Colac and Port Fairy in<br />
mid-2018.<br />
Spider GT’s manager for agriculture and OTR tyres Changa<br />
Alahakoon says the tyres’ reduced soil compaction capacity<br />
have made it popular in wet weather areas.<br />
“Normal tractor tyres dig the soil up when they’re carrying<br />
a heavy load, whereas this one, because it is wider, the soil<br />
compaction is less, so it digs up less soil,” he says.<br />
Their large central lug and matching outer lugs ensure an ideal,<br />
quiet ride even under heavier loads, as well as offering a low<br />
rolling resistance, which leads to reduced fuel costs.<br />
Additional steel belt layers ensure robustness and safe<br />
operations with an increased load capacity on the HD model,<br />
while the low-wear rubber compound guarantees a high<br />
mileage.<br />
Available in sizes of between 500/50R17 and 850/50R30.5, the<br />
large air volume within Agro Grip tyres enables them to carry<br />
heavy loads with comparatively low air pressures, at speeds of<br />
up to 65km/h.<br />
“Even under wet conditions in the field the pattern is not<br />
clogged with earth,” Alahakoon says.<br />
“The open shoulder design allows for good self-cleaning with<br />
only a few wheel revolutions, which is exactly what is asked for<br />
with frequent changes between in field and on road driving.”<br />
This makes them popular for use on silage trucks, feeding<br />
carts, hay bale collectors and other vehicles that need a lighter<br />
surface compaction.<br />
Alahakoon adds that the company provides Agro Grip tyres to<br />
Cowra’s Jadan Enterprises for its hay handling products, as well<br />
as German manufacturers Grotlushen and Wirtgen, and Irish<br />
company Chieftain.<br />
“We are working with a few OEMs to get them on machinery<br />
that is built in Australia,” he says, “But the tyres are pretty much<br />
available anywhere in Australia through Spider GT.”<br />
Left: Titan says the low side wall tyres help reduce road lope<br />
and soil compaction<br />
welcome walls<br />
Now available nationwide,<br />
Titan Australia says its<br />
range of low side wall tyres<br />
offer broadacre farmers<br />
better stability and reduced<br />
soil compaction<br />
Titan Australia says its new tyre design can reduce both soil<br />
compaction and road lope – the swaying and bouncing of a<br />
machine during road transport.<br />
The company, which sells tyres under the Titan and Goodyear<br />
<strong>Farm</strong> brands, introduced its range of low side wall (LSW) tyres to<br />
the Australian market in 2017.<br />
Available in a variety of sizes, the LSW tyre design has a larger<br />
rim diameter and smaller tyre sidewall than a regular tyre –<br />
while the outside diameter and weight load capacity remains<br />
the same.<br />
Titan says this allows the tyres to run at about 40 per cent<br />
less inflation pressure than standard tyres, minimising soil<br />
compaction, while the smaller side wall reduces the recoil and<br />
bouncing that results in road lope and power hop.<br />
Titan tyre specialist Scott Sloan told a gathering at the Tractor<br />
and <strong>Machinery</strong> Association last year that increased flexion (IF)<br />
and very high flexion (VF) tyres were only effective if maintained<br />
at the right pressure.<br />
“That end user has to maintain those inflation pressures to get<br />
the full advantage out of that,” he says.<br />
“With the LSW technology, these guys are able to run higher<br />
road speeds more consistently, more comfortably and actually<br />
safer,” he adds.<br />
In addition, the lower tyre pressure would lead to less soil<br />
compaction in the field than through narrow dual tyres, he says,<br />
saying the tyres spread the weight out over a larger footprint.<br />
“[With the dual] you’re increasing your footprint, you’re<br />
planting into the row, you’re driving into the into the tire track –<br />
but we’re spreading that out so much that it really doesn’t<br />
have a lot of effect on the on the on the emergence of the<br />
plant,” he says.<br />
“With LSW tyres you gain all the advantages of toughness<br />
from the tire to beat or be equal to the performance of the<br />
track machine.”<br />
Titan Australia can install the equipment needed to make such<br />
a change at its facilities in Western Australia, Queensland, New<br />
South Wales and Victoria.<br />
36 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
A U S T R A L I A<br />
TOUGH TYRES<br />
BUILT TO GO<br />
ABOVE AND BEYOND<br />
Modern angled lugs with wide contact<br />
areas that deliver excellent traction with<br />
a comfortable ride and minimized soil<br />
compaction. Also available in modern<br />
IF/VF technology.<br />
TRACTOR<br />
Radial and Bias flotation tyres for wide<br />
contact and reduced soil compaction.<br />
Excellent self-cleaning properties for<br />
safer driving and durable compound<br />
options for paved rural roads.<br />
FLOTATION<br />
Flotation tyres suitable for AG implements<br />
in both Drive and free-rolling applications.<br />
Higher load capacities at low inflation<br />
pressures minimizing soil compaction.<br />
IMPLEMENT<br />
Tianli is a highly specialized manufacturer of application-specific<br />
tyres for agricultural, forestry, and construction equipment.<br />
FORESTRY AGRICULTURE CONSTRUCTION<br />
Contact your local Tianli dealer for more information or call directly on (03) 9792 5006.<br />
www.tianlityres.com.au | info@spidergt.com.au
TYRE FEATURE<br />
Left: The Camso range of tracks are<br />
suitable for low horsepower tractors, all<br />
the way up to 600hp models<br />
moving on up<br />
Products in the Camso<br />
Track and Undercarriage<br />
range are now distributed<br />
down under by the TKV<br />
Group, giving farmers new<br />
options for tractors and<br />
chaser bins<br />
TKV Group has forged ahead since emerging from a merger<br />
of Tuff Stuff and Big Moose Tyre & Track in January 2020,<br />
standing true to its motto of “keep moving”.<br />
The company has very recently become the sole Australian<br />
independent distributor of the complete range of Camso track<br />
and undercarriage products.<br />
When the opportunity to distribute such a high quality and<br />
reputable brand to Aussie farmers came available – TKV seized<br />
the moment and here we are.<br />
Camso produces construction tracks for mini excavators and<br />
track loaders and agricultural tracks for tractors, including all the<br />
undercarriage components such as drive and idler wheels, mid<br />
rollers and track frames.<br />
TKV says in recent years there has been a well-founded trend<br />
to put other farm equipment onto tracked undercarriage and<br />
Camso has risen to the challenge.<br />
The company offers trailed track systems for grain chaser bins<br />
and large implements, along with conversion track systems –<br />
enabling wheels to be removed and a track installation to occur<br />
on harvesters and tractors.<br />
All these products are available through TKV, with a well-trained<br />
and motivated team spread across multiple branches and states<br />
to attend to your enquiry quickly and efficiently.<br />
The Camso Agricultural track line-up includes specific designs<br />
for friction drive and positive drive tractors.<br />
Models start with the 2,500 series for low horsepower<br />
secondary tractors up to the mighty 6500 series for tractors<br />
in the 600 horsepower (447kW) bracket working in extreme<br />
applications, including land scraping.<br />
Camso products are world class, and to date 90 per cent of the<br />
world’s tractor and harvester manufacturers are supplying their<br />
equipment with Camso tracks and undercarriage.<br />
Camso works closely with the OEM equipment manufacturers<br />
for many years before each individual item is released to the<br />
world market.<br />
TKV says distributing Camso products is a huge privilege<br />
and responsibility, but says it is up to the task – adding it to an<br />
existing product lineup that is growing along with an expanding<br />
client base looking for track and undercarriage solutions.<br />
Left: The Traxion XXL tyre was recently marked ‘DLG approved’<br />
by the prestigious German Agricultural Test Institute<br />
Far left: Maxam will offer its warranty on specified agricultural<br />
tyres manufactured and/or sold from 2018<br />
built to last<br />
Australian tyre distributor<br />
Tyremax is backing its<br />
range with an eight year<br />
warranty – with the<br />
European manufacturers<br />
winning local praise<br />
The local distributors of Maxam and Vredestein tyres will<br />
offer an eight-year warranty on selected products within<br />
their agricultural, mining, construction and industrial machinery<br />
product ranges.<br />
Tyremax technical product specialist Neil Jonsson says<br />
Maxam will offer its warranty on specified agricultural tyres<br />
manufactured and/or sold from 2018.<br />
“This is an exciting initiative which shows Maxam’s<br />
commitment to the Australian market,” he says.<br />
“Including tyres from the Agrixtra 85, Agrixtra 70, Agrixtra<br />
65, Agrixtra XL, Agrixtra H, Agrixtra N and Flotxtra ranges, the<br />
warranty provides a free replacement guarantee for the first two<br />
years and pro rata replacement up to a maximum of 96 months<br />
when used according to the manufacturer’s guidelines and in<br />
line with the specified terms and conditions.<br />
“With solid solutions, such as the warranty Maxam has put<br />
on the table, Tyremax is well positioned to confidently supply<br />
quality, specialised tyres to dealers working with customers in<br />
these industries.”<br />
Selected tyres from the Vredestein brand will also have the<br />
eight-year limited warranty, Tyremax says, subject to conditions.<br />
The company’s recently developed Traxion XXL tyre was<br />
recently marked ‘DLG approved’ by the prestigious German<br />
Agricultural Test Institute, following a 15-month testing process.<br />
The tyres (600/70R28s on the front and 710/70R42s on the<br />
rear) were assembled onto six identical John Deere 6215R<br />
tractors, and run in the field as well as working in transport<br />
and road tasks, with the tasks divided between two agricultural<br />
contractors in Germany.<br />
Using data recorded through a JD Link System, a DLG summary<br />
report said the Traxion XXLs “showed a much better wear<br />
behaviour” than the competitor through the whole test.<br />
It added that “the total lifetime of the Traxion XXL is very<br />
positive, especially on the front axle, which is more heavily<br />
loaded with shear forces in cornering”.<br />
Vredestein has also recently moved to further assist its<br />
agricultural customers with the launch of a specially developed<br />
app, currently available on Google Play.<br />
Providing quick and easy access to technical information and<br />
data about Vredestein products, the app is a handy tool for<br />
customers in the search for tyres that suit their requirements<br />
using the Section Width, Aspect Ratio and Rim Diameter<br />
functions to bring up data sheets and other specific information.<br />
This is an example of the specialist knowledge the brands can<br />
provide, which Jonsson says was part of the reason for their<br />
inclusion in Tyremax’s range.<br />
“Tyremax has procured a portfolio of products that meet<br />
important criteria such as strength, durability, wear resistance,<br />
performance, technological innovation and robust construction,<br />
resulting in some of the best products in their class,”<br />
he says.<br />
38 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
TKV:<br />
AUSTRALIA’S<br />
NEW CAMSO<br />
DEALER<br />
Australia’s only independent<br />
importer and distributor<br />
of the complete<br />
CAMSO rubber track &<br />
undercarriage range.<br />
1300 65 11 43<br />
www.tkv.com.au<br />
MELBOURNE • SYDNEY • BRISBANE • TOOWOOMBA
TYRE FEATURE<br />
split rim safety<br />
A rare warning from the<br />
South Australian coroner<br />
has put multi-piece rim<br />
tyres back on the front<br />
page. Andrew Hobbs<br />
looks at ways to reduce<br />
the risks<br />
Above: A US Airman places a tyre in a tyre<br />
inflation safety guard, before leaving the<br />
chamber and inflating it from outside. There<br />
are many steps that one may take to avoid<br />
inflation risks. Image courtesy US Air Force/<br />
Alamy.<br />
Private operators are<br />
urged to be mindful of<br />
the danger of injury.<br />
State coroners rarely make public statements – instead<br />
mostly reserving comments for hearings and inquests,<br />
when they recommend how similar incidents may be avoided.<br />
But South Australian coroner David Whittle bucked the trend<br />
last month when he issued a public warning about inflating<br />
tyres on multi-piece and split vehicle rims.<br />
He did so at the request of a grieving family, after formally<br />
recording that a man had died of “severe traumatic brain injury”<br />
when using an air compressor to inflate a tyre fitted to a multipiece<br />
rim.<br />
“The tyre exploded and a piece of the rim struck him in the<br />
head,” a statement from the coroner’s office says.<br />
“The cause and circumstances of the man’s death were clear<br />
and the state coroner determined, following consultation with<br />
the man’s family, that an inquest would not be held.”<br />
Instead, the coroner has issued a warning about the danger<br />
of inflating tyres fitted on multi-piece or split rims – noting that<br />
they are “not uncommon” in older recreation 4WD vehicles and<br />
machinery operated on private properties, including forklifts,<br />
trailers, trucks and wheelbarrows.<br />
“Private operators are urged to be mindful of the danger of<br />
injury from such wheel assemblies and to avoid inflation whilst<br />
facing or close to the wheel and tyre,” the warning says.<br />
Some of the safety precautions that employers may take<br />
include inflating tyres in purpose-built safety cages and using a<br />
long compressor hose that can be remotely controlled, so the<br />
operator is well clear.<br />
REDUCING THE RISKS<br />
In its General Guide for Split Rims, Safe Work Australia says<br />
people are killed and injured every year in accidents when<br />
inflating a tyre or removing one from a vehicle.<br />
“The main hazard is the uncontrolled releasing of compressed<br />
air from the tyre rim assembly and the compressed air<br />
propelling parts of the tyre, wheel or rim at significant speed,”<br />
the guide says.<br />
Australia’s model work health and safety laws say that a<br />
person conducting a business or undertaking must consider<br />
all risks and hazards in their workplace and eliminate them, or<br />
minimise them as much as possible.<br />
In cases where it is not practical to remove the tyres entirely,<br />
Safe Work Australia recommends “substituting, isolating or<br />
implementing engineering controls” – all factors that do not<br />
depend on human behaviour.<br />
For example, it may be possible to replace your split rims with<br />
suitable single piece wheels, or you may have access to a tyre<br />
inflation chamber, where inflation will not start until the operator<br />
has left and locked the door.<br />
For those of us without that luxury, some may use straps to<br />
hold the tyre steady, but Safe Work Australia warns that while<br />
straps may contain parts of the tyre, the whole assembly could<br />
fly apart if a zipper failure or similar were to occur.<br />
Others will use a protective cage, where a wheel can be placed<br />
before inflating, which would contain the tyre in case of an<br />
accident.<br />
When selecting a safety cage, buyers should consider its rated<br />
tyre size and pressure capacity to ensure that it can withstand<br />
the potential maximum force that a tyre could expel when being<br />
inflated.<br />
They should also be used in accordance with a manufacturer’s<br />
instructions.<br />
There is currently no standard in Australia to which safety<br />
cages should conform, but US regulations OSHA 1910.177 may<br />
be of use to some developers.<br />
PROTECTIVE STEPS<br />
In cases where you know a wheel is a split-rim or multi-piece<br />
rim, or no information or manufacturer recommendations can<br />
be found, Safe Work Australia recommends that the tyre be<br />
deflated before loosening the fasteners.<br />
“Deflate both tyres when dealing with dual wheels, as the outer<br />
wheel may be holding a damaged inner wheel together,” the<br />
group says.<br />
When re-inflating tyres, it is important not to go beyond the<br />
maximum cold pressure recommended by the manufacturer.<br />
Safe Work Australia also recommends that you keep away<br />
from the tyre sidewall during this process, even if the wheel is<br />
restrained.<br />
“Use a long air hose so the tyre can be inflated without the<br />
need to be too close to the tyre. There should be at least 3<br />
metres after the gauge and trigger used to control the inflation,”<br />
it says.<br />
“Use a dump valve capable of rapidly deflating the tyre in the<br />
event of an emergency or as soon as you hear or see something<br />
unsafe or unusual.”<br />
For further information, including what other tyre<br />
defects farmers should look out for before fitting<br />
them onto a rim, download the General Guide for<br />
Split Rims at safeworkaustralia.gov.au.<br />
40 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
REVIEW<br />
1<br />
-VERSAL<br />
UniAPPEAL<br />
As much of the country<br />
recovers (and some parts<br />
are still enduring) one<br />
of the worst droughts<br />
in recent memory, grass<br />
persistence and sward<br />
numbers are more<br />
important than ever.<br />
Autumn re-grassing is a<br />
great tool to ensure feed<br />
covers are where they need<br />
to be. <strong>Farm</strong> Trader NZ’s<br />
Jaiden Drought tested the<br />
Moore Unidrill<br />
The only downside I can<br />
see is the pins, which<br />
hold the roller pivot; it’s<br />
carrying a lot of weight<br />
and could be beefed up.<br />
recently caught up with Lynskey Agriculture and its newly<br />
I purchased Moore Unidrill, imported in Australia by Seeding<br />
Solutions Victoria.<br />
The team opted for the Moore Unidrill, as most of their work is<br />
a combination of direct drilling into existing pasture or re-drilling<br />
crop ground with a variety of seeds (from oats to grass, and<br />
small seeds like plantain and clover).<br />
The beauty of this bit of kit and the main reason it was<br />
purchased is because of the 90mm row spacing. This not only<br />
eliminates the need to cross drill in crop paddocks but also<br />
allows for fast establishment into existing pasture, competing<br />
with the existing sward and fighting off weed competition.<br />
UNDERCARRIAGE<br />
The Unidrill get its name from its single disc design, which has<br />
two major benefits.<br />
Firstly, it makes it ridiculously cheap to own and run, with<br />
little to go wrong, thanks to few moving parts, which mean<br />
cheap motoring.<br />
Secondly, the disc design: a straight disc mounted at a fivedegree<br />
angle, coupled with a soil engaging seed tube coulter<br />
hugging the disc, works as a scraper to keep the disc clean for<br />
quick and accurate seed placement. The slot is opened, seeds<br />
drop in, the rear guttler roller compacts for even seed to soil<br />
contact. The guttler is a great feature of this machine, as it has<br />
a smoothing effect, perfect for crop paddocks but gentle on<br />
existing pasture when oversowing so it doesn’t look like you’ve<br />
been in there with the rotary hoe. Three days later, you wouldn’t<br />
suggest the paddock has even been drilled.<br />
SEEDING AND METERING<br />
The Accord hopper and seed metering system is three-point<br />
mounted and could be run separately, for example on a front<br />
linkage or mounted on a power harrow or roller if you wanted to<br />
have one seeder to mount onto other implements you already own.<br />
The Accord metering hopper and system has been around<br />
for many years, building a reputation based on ease of use<br />
and accurate seed placement. Integral to this simplicity is<br />
the ground-driven metering system via an extendable shaft,<br />
which allows for contour following. This does have a downside.<br />
Overrunning while lifting at the headlands, the metering wheel<br />
keeps spinning, distributing seed while the drill’s not actually<br />
in the ground. A little rubber-mounted flicker has been added<br />
to try and slow this, but a more permanent solution is probably<br />
needed here.<br />
Back to the positives: the distribution tower and venturi are<br />
all located inside the hopper itself. While this does impact on<br />
hopper space, you can still comfortably get 10 bags of grass<br />
seed in, which is more than enough to keep going.<br />
The metering system itself is mechanical. It doesn’t have a<br />
monitor apart from a little digital display, which shows your<br />
fan speed; the rest is all mechanically driven off the ground. It<br />
does have a hectare counter, working via the revolutions on the<br />
metering wheel. This counter is also used to calibrate the machine<br />
42 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
REVIEW<br />
2<br />
3 4<br />
5<br />
by doing 85 revolutions with a handle that gives you 1/10th of<br />
a hectare; then you just simply go drilling. A sight glass into the<br />
hopper or upgrading to the low seed sensor would be a welcome<br />
addition here, as it’s hard to know how much seed is left.<br />
This machine is available in both trailed and linkage mounted<br />
options. This particular machine had a linkage mounted set-up<br />
with an engineer mounting the rear transport wheels later.<br />
LINKAGE MOUNTED<br />
There are a couple of key benefits for the linkage mounted<br />
system and for many farmers it would probably be more than<br />
adequate while allowing for a considerable cost saving.<br />
You can pretty much drill every square inch of the paddock,<br />
backing into corners perfectly around water troughs, etc.<br />
Turning, however, is a lot harder with a linkage mounted drill<br />
(particularly a disc drill). This simply means you drill more like<br />
ploughing, doing straight lands first, tidy up, and then headland<br />
– no dramas.<br />
The only downside to the linkage-mounted set-up is that the<br />
drill is 2.5-tonne with most of that weight right out the back in<br />
the roller, so you need a decent-sized tractor not just to pull the<br />
drill but to make sure that you don’t end up pointing towards the<br />
sky every time you try to lift a drill up.<br />
TRAILING<br />
The trailing mounted set-up is a good option, as this allows for<br />
easy transport not only between paddocks and lifting at the<br />
headland but it also makes it much safer and easier on the<br />
tractor for road transport.<br />
Importantly, the trial kit also adds roughly another tonne of<br />
weight. Now, weight is an interesting thing on drills. In this<br />
case, the narrow row spacing is both the Unidrill’s biggest<br />
advantage and disadvantage. Because of the narrow row<br />
spacing, getting it in the ground in very hard conditions like<br />
we’ve experienced this summer can be a challenge due to lots<br />
of discs per square metre.<br />
You could have the roller off the ground with the transport<br />
wheels up in the air and still only just be penetrating. Additional<br />
suitcase weights can be added if this is a real issue.<br />
REAR ROLLER AND DEPTH CONTROL<br />
Depth is controlled by the hydraulic rams on the rear roller along<br />
with either the top link (if it’s linkage mounted) or an adjustable<br />
top link on the drawbar of the trailing machine. The hydraulic<br />
roller allows for easy adjustment of the seed depth. Pushing<br />
the roller right down will lift the seeding coulters off the ground<br />
with all the weight on the packer roller, or all weight can be put<br />
on the discs to give up to 94kg/coulter by lifting the roller right<br />
off the ground. In crop paddocks, the guttler does a beautiful<br />
job and is equally as impressive in oversowing. A simple depth<br />
control chart gauge is on the side as well as a gravity activated<br />
arrow to ensure the drill is sitting level. The only downside I can<br />
see is the pins, which hold the roller pivot; it’s carrying a lot of<br />
weight and could be beefed up.<br />
1. The Moore Unidrill is ideal for<br />
undersowing<br />
2. Metering wheel with drive shaft to the<br />
accord metering system<br />
3. The rubber mounted single trailing arm.<br />
Disc is mounted on a five-degree angle<br />
4. The guttler roller uses a combination of<br />
large and small rings, one fixed and the<br />
other sloppy on the shaft<br />
5. The rear guttler roller creates great seed<br />
to soil contact without making a mess in<br />
existing pasture<br />
There are a couple of key<br />
benefits for the linkage<br />
mounted system and for<br />
many farmers it would<br />
probably be more than<br />
adequate.<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 43
REVIEW<br />
The seeding tower is neatly<br />
enclosed in the hopper<br />
Moore Unidrill<br />
Working width 2.9m<br />
Total width 3.1m<br />
No of discs 32<br />
Hopper capacity 700L<br />
Seeding<br />
Hydraulic fan,<br />
Accord metering<br />
Disc diameter 410mm dia, 5mm<br />
thick<br />
Disc mounting Rubber mounted<br />
trailing arm, sealed<br />
hub<br />
Roller<br />
Rear guttler roller<br />
Roller rings<br />
Twin prisma<br />
Roller shaft diameter 50mm<br />
Pluses<br />
90mm spacing, 32 discs total of 2.9m sowing<br />
width<br />
Fewer moving parts; low ongoing repair and<br />
maintenance<br />
Narrow row spacing but staggered design<br />
allows good trash clearance<br />
Mechanical seed metering and calibration on<br />
test machine although monitor, sensors are<br />
available<br />
30+ years of experience in the accord<br />
metering, exactly accurate<br />
Can add suitcase weights if additional weight<br />
is needed<br />
Minuses<br />
Ground metering wheel overruns at the<br />
headland; needs some sort of brake<br />
Simple perspex site glass into the hopper<br />
would be a welcome addition if a low seed<br />
sensor is not fitted<br />
The metering wheel sits close<br />
to the machine, ideal for getting<br />
through gateways<br />
VERDICT<br />
The Moore Unidrill is ideal for farmers and contractors who<br />
don’t need the elaborate triple disc design and associated<br />
running costs but still want the accuracy and finish of a<br />
disc drill.<br />
Many farmers have a tractor big enough to handle the linkage<br />
mounted machine and the trailing option would be fine behind a<br />
100hp (75kW).<br />
Metering wheel with<br />
drive shaft to the accord<br />
metering system<br />
The 90mm row spacing makes it perfect for oversowing<br />
without the need for diamond drilling in crop paddock. Direct<br />
drilling allows the grass to establish faster than competing<br />
weeds, making for an excellent strike. The rear guttler roller<br />
has a perfect smoothing effect in cultivated ground and does a<br />
nice padding effect without chopping the existing grass for over<br />
sowing, making the unit the perfect all-rounder.<br />
44 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
AUSTRALIAS LARGEST SUPPLIER OF<br />
EARTHMOVING ATTACHMENTS<br />
HYDRAULIC<br />
WOOD SHEAR<br />
SIEVE<br />
BUCKET<br />
TILT<br />
BUCKET<br />
COMPACTION<br />
WHEEL<br />
IN STOCK<br />
MUD<br />
BUCKET<br />
HYDRAULIC<br />
GRAB<br />
FAST<br />
DELIVERY<br />
AUSTRALIA WIDE<br />
ROCK<br />
BUCKET<br />
RAKE<br />
GP<br />
BUCKET<br />
4 IN 1<br />
BUCKET<br />
RIPPER<br />
BETTA BILT BUCKETS<br />
BILT BETTA<br />
1300 699 888<br />
sales@bettabiltbuckets.com.au<br />
BETTA DESIGN • BETTA QUALITY • BETTA BILT<br />
HD MANUAL<br />
GRABS<br />
GRAB<br />
BUCKET<br />
BBB
REVIEW<br />
a quiet<br />
achiever<br />
1<br />
With Level 4 and 3<br />
lockdown putting an end<br />
to any immediate travel<br />
plans or machinery tests,<br />
<strong>Farm</strong> Trader NZ’s William<br />
McKnight managed to get<br />
a Ubco 2x2 (version 4.5)<br />
electric bike delivered to a<br />
hilly 200-hectare farm on<br />
the outskirts of Cambridge<br />
for a prolonged test ride<br />
Images by Oliver Shergold<br />
Ease of use is a definite<br />
plus here with nothing<br />
overly complex to<br />
contend with.<br />
Having ridden farm bikes for the better part of 30 years, I’ve<br />
spent more hours than I care to admit straddling two- and<br />
four-wheeled farm bikes. As a former competitive mountain<br />
biker, in any rare spare time, farm bikes are swapped out for<br />
pure pedal power.<br />
While the days of national racing titles are behind me now,<br />
I’m still an avid fan of cross-country bike adventures, particularly<br />
with the impressive Te Miro mountain bike park virtually on<br />
our doorstep.<br />
Having recently bought an e-bike for my wife so she could<br />
better enjoy day-long outings with the kids and myself,<br />
surprisingly, I’ve become something of a fan of the e-bike<br />
myself, so the opportunity to test-ride an electric farm bike was<br />
one I was definitely keen to try.<br />
FIRST IMPRESSIONS<br />
From my research, I had a good idea of what to expect,<br />
and this latest version (4.5) is strongly built with all the<br />
features promised. For those who have never come across<br />
an electric farm bike before, or are used to riding quad<br />
bikes, it takes a minute to get used to the smaller size,<br />
which is really no different to standard two-wheel farm<br />
bikes. However, the Ubco easily stood up to my post-lockdown<br />
farm build with no problems and my teenage son found it<br />
equally adaptable.<br />
Having never ridden an electric farm bike before, I’d been<br />
looking forward to a bit of a pre-ride briefing, but lockdown<br />
conditions made this impossible. However, turns out this<br />
wouldn’t have been necessary; ease of use is a definite plus<br />
here with nothing overly complex to contend with.<br />
This makes the bike an ideal asset for properties where a<br />
couple of staff may be using the bike. No special instructions<br />
needed; just turn the key and away you go.<br />
Another advantage is that the Ubco 4.5 version is fully road<br />
legal and can be ridden on a car license, making it a versatile<br />
addition to most properties, particularly for an easy commute to<br />
a nearby runoff.<br />
DRIVE TIME<br />
With a motor in both wheels, traction is evenly spread and there’s<br />
no startling start-up noise; neither is there a clutch or drivetrain.<br />
The fewer complexities a farm bike has, the less maintenance and<br />
problems tend to arise, so a thumbs up for simplicity.<br />
The hand throttle makes the unit easily responsive, and on<br />
the flat terrain we started off on, there was more than enough<br />
power from the dual electric drive brushless motors. Each motor<br />
has a 1.2kW output, combining for an overall 2.4kW of total<br />
power and 184Nm torque.<br />
The first test drive was a simple run around on the flatter areas<br />
of the farm, chasing cows down races, etc. The Ubco easily<br />
carried my 90kg frame at the top speed of 50km/h and was<br />
smooth and stable to ride.<br />
I decided to up the ante a bit and loaded up the weight (thanks<br />
to two handy farm kids taking a break from online schooling).<br />
With one son (safely) positioned on the front carrier, me driving,<br />
and the other on the back, we packed the combined weight up<br />
to 160kg and it still performed really well. We don’t recommend<br />
this. Ed.<br />
46 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
REVIEW<br />
2 3<br />
4<br />
5<br />
Having deposited the kids home, I decided to push the<br />
limitations and set off to some of our steepest most challenging<br />
terrain. This is where, like most bikes, I found its limitations<br />
kicked in and it struggled to compete against a fuel-injected<br />
model. Once the bike reached a certain pressure point on<br />
the upright hills, it would just slowly stop driving, which to be<br />
honest, was what I expected.<br />
Even though limited climbing hills, it could zig-zag up them,<br />
and with the low centre of gravity and strong brakes, the 2x2<br />
drive descended down hills smoothly and with good control.<br />
It’s also worth mentioning that the demo bike was kitted out<br />
with turf tyres (17x2.75), which weren’t a great help on the<br />
slippery slopes, but a knobblier, gruntier tyre option is available<br />
for farm off-road use. Once the front wheel and motor starts<br />
slipping, it does limit your traction a bit.<br />
Fortunately, the well-placed mudguards proved their worth and<br />
were highly effective in stopping any mud flicking up.<br />
PRACTICAL MEASURES<br />
Like all farm machinery, it’s crucial to get the right machine for<br />
the right job. Obviously, this bike wouldn’t be your pick if you’re<br />
on rugged or demanding hill terrain, but as an all-round farm<br />
bike on a dairy farm, it’s ideal for getting cows in with minimum<br />
fuss, thanks to its near-silent operation.<br />
Plus, with no chain or oils to maintain, it’s an asset to the farm<br />
fleet for its undemanding servicing requirements.<br />
Comfort factor is high, which isn’t always the case with twowheel<br />
farm bikes, with a well-designed seat placed at a useable<br />
height of 800mm.<br />
Clearly, careful thought and planning has gone into the<br />
deceptively simple design.<br />
It’s the little touches that stand out, such as the well-placed<br />
and correctly sized kickstand, nice wide footpegs, and a definite<br />
tick for the fact there are no gas emissions.<br />
The quiet performance comes into its own for evening rounds<br />
or when moving around ewes and lambs.<br />
Then there’s the fact a small trailer could be hooked up to the<br />
Ubco – ideal for a heading dog on the back or for a useful and<br />
versatile hunting vehicle in the bush with enough trailer load<br />
for taking home the literal bacon. The unit can pull up to 40kg<br />
of load.<br />
STOP AND GO<br />
One thing you need with any bike on farm is good brakes, and<br />
the hydraulic disc brakes are effective at bringing the Ubco to a<br />
stop quickly.<br />
Much like a bicycle, the front wheel brakes are operated from<br />
the right-hand side lever, while the back-wheel brake lever<br />
is found on the left side where the clutch would normally be<br />
controlled from.<br />
Suspension is also good, with a fully adjustable 130mm of<br />
travel in the front and 120mm of travel in the back<br />
BATTERY POWER<br />
Placement of the 48A/h 50-volt lithium-ion battery down low in<br />
the cross pattern alloy frame makes for a good, stable low centre<br />
of gravity while allowing the bike to be extremely moveable and<br />
still have the acceleration to head off stock in the paddock.<br />
1. The Ubco 2x2 (version 4.5)<br />
2. Fully adjustable suspension front and<br />
back<br />
3. A range of accessories are available for<br />
customising<br />
4. Good lights for road or farm use<br />
5. The bike works well on flat dairy pasture<br />
Pluses<br />
Cost efficiency<br />
Low maintenance<br />
Safe stable operation<br />
Comfortable seat and height<br />
Lighting package<br />
Minuses<br />
Carrier platform would be useful as<br />
standard spec<br />
Struggles a bit when faced with steep hills<br />
It’s definitely worth<br />
considering, thanks to its<br />
ongoing cost efficiencies,<br />
low maintenance, and<br />
useability.<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 47
REVIEW<br />
6<br />
8<br />
7<br />
9<br />
6. No clutch or drivetrain, no emissions, and<br />
no noise<br />
7. The screen displays all the info you might<br />
need, including battery indicator/trip recorder<br />
8. Straightforward: turn the key and go<br />
9. Lightweight design belies the strong build<br />
Ubco 2X2<br />
Height<br />
Length<br />
Width<br />
Wheelbase<br />
Seat height<br />
Curb weight<br />
Carrying cap<br />
Typical cost<br />
to recharge<br />
Motor<br />
Power pack<br />
1,050mm<br />
1,820mm<br />
800mm<br />
1,216mm<br />
800mm<br />
65kg<br />
150kg including rider<br />
under $1<br />
Two 1kW peak brushless DC,<br />
air cooled hub, Flux Drive<br />
motors<br />
UBCO Lithium-Ion 52.2Ah<br />
(48Ah rated), 50V battery<br />
Charger type 100–240V 350W, wall or bench<br />
mount<br />
Charge time 6–8 hours<br />
Brakes Tektro Dorado front and rear<br />
brakes, 203 x 2.3mm rotors,<br />
high power hydraulic calipers<br />
Wheels 17 x 1.85 aluminium rims<br />
Tyres 17 x 2.75 Kenda K667 tyres<br />
Range 120km, max range will vary<br />
depending on terrain and load<br />
Power 2.4kWh<br />
Torque 184Nm<br />
Top speed 50km/h<br />
The 17kg battery can be easily removed for loading onto a<br />
ute or trailer, or charging, with just the flick of clip, followed by<br />
undoing the power lead bolt.<br />
It could probably even be transported on your mountain bike<br />
towbar carrier with the battery removed to lighten the load a<br />
bit. Weighing in at a total of 65kg, this comes down to just 48kg<br />
once the battery has been removed.<br />
With speed of the essence when it comes to useability, the<br />
battery can be plugged in to charge overnight (while still<br />
attached to the bike) where it takes between six and eight hours<br />
to recharge fully from empty.<br />
The range is stated to be between 100 and 120km, depending<br />
on the terrain, how hard it is being ridden, and the weight of the<br />
rider and load.<br />
COST-EFFICIENCY<br />
Comparable to a 100cc mainstream farm bike, I reckon the cost<br />
efficiencies are pretty impressive. Coming in at just under $1 per<br />
charge, there are some solid savings to be made, particularly<br />
when fuel prices start creeping back up again. I like the fact you<br />
can just plug it in overnight and in the morning, it’s ready to go.<br />
Also being able to lay it down and pick it up again without<br />
flooding the motor is a definite plus for me – and yes, I speak<br />
from experience.<br />
ALL LIT UP<br />
The LED lighting package is surprisingly good, with a massive<br />
2230 lumens for the front light on high beam and 1330 on dip.<br />
It was great for whipping around the paddocks in the dark,<br />
checking stock and being able to see the sometimes elusive<br />
water troughs and cattle ruts. A+ for night lights and additional<br />
lighting with rear, brake, number plate, and directional lights.<br />
HIDDEN EXTRAS<br />
While at first glance, this streamlined package looks to be<br />
nothing but a basic bike, there are, in fact, some nifty and useful<br />
extras included, such as an integrated ECU, which directly<br />
controls the lights, motor, display, and rider controls. On the LED<br />
display, there is a clock, battery level indicator, speed monitor,<br />
and trip recorder. If there are any errors with the bike, a warning<br />
light and code are also displayed here.<br />
The app also allows for on and off-road options as well as a<br />
learner option.<br />
A useful Bluetooth connection for the phone app allows riders<br />
to monitor battery and motor temperature as well as enabling<br />
GPS tracking.<br />
There are also two USB charging ports and a 12-volt power port<br />
for tools.<br />
VERDICT<br />
Designed in New Zealand, the Ubco we tested was supplied<br />
by Hamilton Motorcycle Centre, the Waikato dealer for the<br />
brand, but Ubco also has dealers across Australia. It’s a neat bit<br />
of kit, not just for the farm but for hunting, town commuting, or<br />
popping on the back of the campervan or caravan.<br />
Being environmentally friendly with no oil or fuel required has<br />
to be a major drawcard, and it’s ideal for farms and lifestyle<br />
blocks, as well as horticulture and viticulture businesses. With<br />
space to carry basic tools and equipment on up front and back,<br />
the design lends itself to many uses.<br />
A range of interchangeable accessories is available to<br />
customise for individual requirements.<br />
While it’s priced at the top end of the two-wheeler market,<br />
it’s definitely worth considering, thanks to its ongoing cost<br />
efficiencies, low maintenance, and useability.<br />
48 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
03 9706 5266<br />
safeliftsolutions.com.au<br />
1 England Street Dandenong South VIC<br />
TRIED &<br />
TRUSTED<br />
VICTORY VL200E<br />
Features: 2000kg Capacity (5500kg Operating weight) 94HP Turbo<br />
diesel Motor Powershift Transmission, Air Con Cab, Hydraulic Quick<br />
Hitch, 4 in 1 Bucket, Reverse Camera, Pallet Forks and Spare Wheel<br />
12 Month / 2000 Hour Full Warranty. Every Industry has a leader<br />
Visit www.safeliftsolutions.com.au, call 03 9706 5266. S177. TA650766.<br />
$28,900 inc-GST<br />
VICTORY VL280E<br />
In Stock Now Features: 6500kg Operating weight, 2800kg Capacity,<br />
125HP Turbo Diesel Deutz Motor, 2 Speed Powershift Transmission,<br />
Air Con Cabin, Hyd Q/H, 4 in 1 Bucket, Pallet Forks, Spare Wheel 12<br />
Month / 2000 Factory Warranty We sell, support and service<br />
Australia's best value new Wheel Loader range Visit<br />
www.safeliftsolutions.com.au or call 03 9706 5266. S286. TA721514.<br />
$39,900 inc-GST<br />
VICTORY VT65<br />
NEW Tractor with 65HP YTO Diesel Motor, 12F/12R Transmission,<br />
Air Con Cab, Front End Loader with 4in1, 6FT Slasher, MP3 Player,<br />
plus more. 12 Month / 2000 Hour Full Warranty, NO WAITING IN<br />
STOCK NOW!. S83-1. TA776592.<br />
$29,900 inc-GST<br />
VICTORY VF25D<br />
Features: 2500kg Capacity, 4500mm 3 Stage Container Mast with<br />
sideshift, Perkins Type Diesel Motor, Auto Transmission, Pneumatic<br />
Tyres, 12 Month / 2000 Hour Warranty. New and in stock now.<br />
V25D. TA600888.<br />
$19,900 inc-GST<br />
VICTORY VF35D<br />
Features: 3.5T Capacity, 4.5M 3 Stage container mast with sideshift,<br />
60HP Diesel Perkins type motor, Automatic Transmission,<br />
Pneumatic Tyres, 1 Year / 2000 Hour warranty, DUAL FUEL VERSION<br />
also avail. TBA. TA745269.<br />
$21,900<br />
VICTORY VF40D<br />
Diesel Forklift -IN STOCK NOW! - 4,000kg Capacity, 4,500mm 3<br />
Stage container mast with sideshift, 65HP Diesel Perkins type<br />
motor, Automatic Transmission, Pneumatic Tyres, 2 Year / 2,000<br />
Hour Australia wide warranty. S113. TA745274.<br />
$28,900<br />
VICTORY VP25<br />
New Pallet Jack - 2500kg Capacity Standard and Narrow version<br />
available both with 12 Month Warranty, In Stock, cheap shipping<br />
available Aust wide via TNT or pickup direct, WHY PAY MORE?.<br />
VP25. TA603114.<br />
$308 inc-GST<br />
SEAT GS12<br />
New Semi Suspension Seat suitable for Forklifts, Bobcats, Loaders<br />
and Excavators are now in. With seatbelt - $165 Without belt just<br />
$120. Cheap Australia wide postage available<br />
GS122. TA596859.<br />
FROM $120 inc-GST<br />
BOBCAT TYRES 10- 16.5 12 PLY<br />
Bobcat Skid Steer Tyres are now in stock and available at just $125<br />
+ GST! Top Quality, 12 PLY - 10x16.5 Skid Steer Loader tyres. WHY<br />
PAY MORE! (freight available). TA650725. TA650725.<br />
$138 inc-GST<br />
Machines in stock now ready to ship<br />
Full range of attachments available No nonsense warranties
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
<strong><strong>Farm</strong>s</strong> & <strong>Farm</strong><br />
<strong>Machinery</strong> looks back<br />
at some of its most<br />
popular reviews from<br />
the last decade. This<br />
month, 10 of our best<br />
Spreader reviews<br />
REVIEW<br />
R E W<br />
I N D<br />
4<br />
Spread it round<br />
Steve Kealy looks at the<br />
Vicon RO-EDW Geospread<br />
in this 2014 review<br />
Images: PFG Australia<br />
1. The Vicon RO-EDW Geospread models<br />
have four 5-tonne load-sensing<br />
electronic cells which measure weight of<br />
the product<br />
2. Vicon’s rotary flow system has internal<br />
agitators that start the granules spinning<br />
before they get flicked out on their<br />
carefully calculated trajectories<br />
3. Dual colour screens allow the operator<br />
to track the performance of the<br />
implement and the tractor<br />
4. The working width is automatically<br />
adjusted to suit the overlap and<br />
coverage.<br />
Vicon rotary flow<br />
RO-EDW Geospread<br />
(eight models available)<br />
Capacity<br />
Empty weights<br />
Maximum gross<br />
weight<br />
Spread width<br />
Flow-rate<br />
Warranty<br />
1,500 to 3,900 litres<br />
665 to 795kg<br />
3.9 tonnes<br />
12 to 45m<br />
10 to 320kg per minute<br />
Three years<br />
The 21st century has caught up with fertiliser spreading, Dutch<br />
farming equipment manufacturer Vicon has added a very<br />
precise global positioning system (GPS) controller to its spreaders.<br />
The result is a machine that accurately meters flow rates and<br />
spreading patterns to ensure every metre of even the most<br />
irregular field gets exactly the same coverage.<br />
It draws an electronic map of not just the shape but also the<br />
fall of the land and tracks where the valuable material has been<br />
deposited, making sure it doesn’t overdose in some places or<br />
run lean in others.<br />
Vicon’s current stable of rotary flow spreaders starts with the<br />
RO-C compact, RO-M medium and RO-XL extra large, right up to<br />
the flagship RO-EDW model, which stands for electronic dosing<br />
and weighing.<br />
But the Vicon RO-EDW Geospread isn’t just one machine<br />
– there are eight different models, ranging from 1,500- to<br />
3,900-litre capacity, with empty weights of between 665 and<br />
795kg. Maximum gross weight is 3.9 tonnes.<br />
All of them will spread to a width of between 12 and 45m, and<br />
at flow-rates of between 10 and 320kg per minute.<br />
For lighter or more aerated material, the load height can be<br />
extended with up to three aluminium extensions and there’s a<br />
tonneau cover to keep the product dry when it rains.<br />
Made of stainless steel and pained with thick red paint, the bins<br />
have four 5-tonne load-sensing electronic cells which measure<br />
the weight of the product, sampling twice a second. They’re<br />
coupled to a central reference sensor that measures G-force<br />
shocks generated by potholes, ditches or stray rocks and<br />
also senses angle, gradient and speed changes, adjusting the<br />
spreader’s flow-rate accordingly.<br />
The chunky in-cab IsoMatch Tellus, a rugged dual-display<br />
touch screen with a multitude of computer ports, hooks up<br />
to a standard IsoBus cable interface. More than 50 types of<br />
implements from a variety of rival manufacturers will work on<br />
IsoMatch Tellus. Dual colour screens allow the operator to track<br />
the performance of the implement and the tractor, displaying<br />
tractor engine control unit (ECU) data, a zoom-able GPS map,<br />
daylight or infrared reversing camera views and even the<br />
internet, if the relevant hardware is installed.<br />
At the heart of the system, Geocontrol monitors where you’ve<br />
been and adjusts the spread automatically to avoid dead zones<br />
with no coverage or over-treatment by double-dosing. The<br />
working width is automatically adjusted to suit the overlap<br />
and coverage.<br />
For example, when operating in an irregular-shaped field,<br />
Geospread will decrease the working spread-width in 2m steps.<br />
The system also saves job data and field maps for download to<br />
farm management systems.<br />
Vicon’s rotary flow system has internal agitators that start the<br />
granules spinning before they get flicked out on their carefully<br />
calculated trajectories. This reduces crushing of feed-stock,<br />
which means less dust and better coverage.<br />
Dual rotating dosing units run at between 540 and 950rpm and<br />
have eight horizontal vanes that accelerate the medium being<br />
spread, which is key to getting ultra-accurate coverage.<br />
There are two electric actuating arms on each dosing unit:<br />
one controls flow to the discharge point of the dosing cup onto<br />
the disc, the other controls the application rate. The Geospread<br />
makes it possible to adjust the discharge point individually for<br />
both discs from the tractor’s cab, but at less than 70kg per<br />
minute, two of the apertures close.<br />
Vicon doesn’t use hydraulic power to adjust disc speed,<br />
instead changing the timing when fertiliser enters and leaves<br />
the spreading vane with the actuators.<br />
The spreaders are driven by either the six-spline 540 power<br />
take-off (PTO) or a 21-spline adapter – no heavy and costly<br />
hydraulics. German rivals Rauch and Amazone both do<br />
the same.<br />
There are no real losers when the Geospread comes out<br />
to play. The land gets exactly what the agronomist ordered,<br />
with no costly and potentially dangerous overdosing. The<br />
landowner gets a reduced consumption of whatever is being<br />
spread. There’s less chance of surplus product running off into<br />
waterways or dams, and eventually, the crop or harvest should<br />
reflect this attention with a higher yield.<br />
The savings in product will be small in level, regularly-shaped<br />
fields, but if topography and terrain are against you, the<br />
Geospread comes into its own.<br />
Looking for a<br />
Spreader?<br />
Search for ‘spreader’ on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
or type the TA or DIY code<br />
shown here into the<br />
keyword search field<br />
$12,595<br />
TA1028988<br />
VICON RO-M1100. 1100 litre twin disc spreader.<br />
• QLD 07 3085 2777<br />
$5,775<br />
TA724024<br />
VICON PS754. New wag tail spreader •<br />
QLD 07 3073 8164<br />
$19,195<br />
TA1029020<br />
VICON RO-XL1875. 1875 litres, twin disc high<br />
capacity model. • QLD 07 3085 2777<br />
50 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
SPREADER REVIEWS<br />
Brent Lilley found accuracy was key for<br />
Bogballe’s M-Line range in this 2019 review<br />
1 2<br />
3<br />
4<br />
The business<br />
of spreading<br />
Almost all twin disc spreaders use off-centre spreading,<br />
where material is dropped on the centre side of the<br />
spreading disc and thrown outward, Danish manufacturer<br />
Bogballe has always used the in-centre spreading method.<br />
This means material is dropped to the outside of the spinner<br />
and thrown from one side and across the back of the machine<br />
in an almost 180-degree arc, giving the operator a double<br />
overlap in one pass, with even distribution across the back of<br />
the machine.<br />
So, in a normal spreading pattern at 24-metre intervals, you end<br />
up with a quadruple overlap, which builds up the spread pattern<br />
evenly and accurately.<br />
In models in Bogballe’s M-Line range, the spreading width can<br />
be anywhere from 12 metres up to around 42 metres, although<br />
conditions would need to be perfect for this. To adjust it, a level<br />
indicator ensures the frame is level on the tractor before it is<br />
tilted slightly forwards or backwards to increase or decrease the<br />
spreading width.<br />
This is easily changed with a scale manually, or there is an<br />
option for automatic electronic adjustment from the monitor.<br />
The M-Line’s section control effectively cuts down the<br />
spreading width in real time as the machine is moving when<br />
spreading wedge shapes or thin strips. While it’s an option<br />
requiring a GPS controller, it’s well worth it in my opinion, with<br />
huge savings to be made.<br />
The GPS detects the area to be spread and will narrow the<br />
spreading width electronically by adjusting a small brush under<br />
the shutter on the required spinner, which delays the drop of<br />
the fertiliser, changing where it hits the vanes and therefore<br />
reducing the spread pattern where required. This all happens<br />
seamlessly, and the shutters also reduce the flow for the same<br />
even accurate placement.<br />
Bogballe can also spread to the edge of a paddock by adjusting<br />
to a traditional rotation system, reversing the rotation disc and<br />
enabling material to be spread with the back side of the vane<br />
through a strategically placed hole.<br />
Models in Bogballe’s M-Line range can hold between 1,250<br />
litres and 6,000 litres, depending on the height and width of the<br />
hopper attached.<br />
The spreader also has a freewheeling eccentric agitator<br />
designed to move as material in the hopper flows past it, selfregulating<br />
with the type of material and flow rate.<br />
Above each spinner on the bottom hopper is a dynamic double<br />
shutter that opens and closes to regulate flow as needed.<br />
A hinged grate inside the hopper also prevents any lumps from<br />
getting to the bottom, while a sight glass at the front gives the<br />
operator a clear view of how much is left and a scale on the<br />
inside proves handy when loading.<br />
There is a range of four changeable inserts that change<br />
the shape of the shutter hole to give a range of spreading<br />
rates, from a massive 650kg/min down to an impressive<br />
1kg/min, and to allow for spreading of anything from fertiliser<br />
to seeds.<br />
The Calibrator Zurf monitor is a decent size with a large monocoloured<br />
screen and well-spaced buttons, including a central<br />
“Help” button which adds to the overall ease of use.<br />
Bogballe also offers weigh scale versions as an option, showing<br />
the operator the precise amount of material used and also<br />
allowing for real-time auto-calibration, which continually refines<br />
the spreading rate to match the desired rate with the area<br />
covered and weight used.<br />
All the spreader’s steel components are laser cut for clean<br />
edges before being welded together, following a seven-step<br />
cleaning process to remove all contaminants before it is baked<br />
dry and powder-coated.<br />
It’s also easy to clean, with mudguards at the front and cleverly<br />
placed ports where a pressure nozzle can be inserted to clean<br />
hard-to-reach places.<br />
The benefits of accurate on-board weighing, even spreading,<br />
edge spreading, section control, and variable rates are hugely<br />
important to make sure your fertiliser is put exactly where you<br />
need it.<br />
The attention to detail in the design of the machine in terms<br />
of easy cleaning and the robust, high-quality paint finish are<br />
definite highlights for me.<br />
While a spreader of this specification represents a substantial<br />
initial investment, it will more than pay for itself for those with<br />
serious amounts of product to spread.<br />
1. The dynamic shutter electronically<br />
opens/closes to give variable spread<br />
rates from 1kg to 650kg/min<br />
2. Bogballe’s In-Centre spreading pattern<br />
provides double over-lap for accuracy<br />
3. Bogballe is compatible with most GPS<br />
systems including its own Navi-App<br />
Tablet option<br />
4. Load cells between the two frames<br />
on the spreader accurately weigh the<br />
material in the bin<br />
Images: Laura Batten<br />
In a normal spreading<br />
pattern at 24-metre<br />
intervals, you end up with<br />
a quadruple overlap.<br />
$36,000<br />
TA1027936<br />
2017 BOGBALLE M2W PLUS. 3300ltr Capacity,<br />
Approx 2.5tn Urea. • NSW 02 8315 0164<br />
$24,200<br />
TA900361<br />
2018 BOGBALLE M2 PLUS. Linage spreader, 9T<br />
vanes will do 36mt Urea. • NSW 02 8279 7084<br />
$27,500<br />
TA1028833<br />
2016 BOGBALLE M2W. 3PL fertiliser spreader<br />
fitted with 3300L capacity. • NSW 02 8315 0164<br />
$13,200<br />
TA900359<br />
2003 BOGBALLE EX TREND. Spreader, 1000L<br />
base with approx 2800L ext. • NSW 02 8279 7084<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 51
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
Rise of the machines<br />
Tom Dickson conceded that<br />
artificial intelligence was<br />
taking over when he trialled<br />
the Kuhn Axis 50.1 spreader<br />
in 2014 at a farm near<br />
Cobden, in Western Victoria<br />
Kuhn axis 50.1 H-EMC-W<br />
linkage spreader<br />
Working width 50m<br />
Bin capacity 4,000 litres<br />
Maximum load 4,000kg<br />
Tare weight 695kg<br />
Height 149cm<br />
Rate<br />
Electronic<br />
adjustment<br />
Outlet control Electronic<br />
Weigh bars Standard<br />
Hopper cover Standard<br />
Control box cci 100 (ISOBUS)<br />
Hits<br />
Simplicity<br />
Fully automated<br />
Dual monitors<br />
Accuracy<br />
Misses<br />
Poly tarp lid<br />
Servicing an expanding dairy community, fertiliser supply and<br />
spreading company Webber & Chivell recently bought a<br />
Kuhn Axis 50.1 H-EMC-W linkage spreader and mounted it up on<br />
a new 310hp (231kW) JCB Fastrac 8310.<br />
H is for hydraulic. EMC stands for electronic mass flow control<br />
and W indicates weigh bars.<br />
The Axis 50.1 spreader is a single bin unit with two delivery<br />
outlets. Because its main use is spreading urea, Webber &<br />
Chivell added an extension to bring its 4,000-litre capacity to<br />
more than 5,000 litres.<br />
I am pleased to see a full mesh screen is mounted inside the<br />
bin to prevent lumps of fertiliser or other foreign matter blocking<br />
the outlet chutes, while a set of steps on the side makes it easy<br />
to monitor the filling process.<br />
Kuhn has opted to use a poly cover over a steel frame to act<br />
as a lid for the spreader. It is effective and simple to operate by<br />
moving the lever action backwards and forwards to expose 100<br />
per cent of the opening.<br />
My only criticism would be that this synthetic material may<br />
eventually break down in Australia’s harsh weather conditions. I<br />
did also notice it didn’t form a very good seal around the top of<br />
the bin.<br />
The agitators rotate at about 17 rotations per minute to<br />
maintain a constant flow of fertiliser without damaging it.<br />
When the delivery chutes shut the agitators stop turning so no<br />
crushing or powdering of the fertiliser occurs.<br />
Underneath the spreader two sets of spinners, rate controllers<br />
and drop point chutes work together to ensure perfect delivery<br />
and spread pattern, from 18–50m.<br />
Because the bin has a 2.8m opening most front end loaders<br />
can fill directly out of a storage dump and you could even<br />
throw bags of fertiliser in off the back of a ute or truck – as<br />
when the Axis 50.1 is lowered the top of the bin is only<br />
149cm off the ground.<br />
The spreader’s Kuhn CCI 100 control monitor is compatible<br />
with all ISOBUS machines, meaning you can fill it, set it and<br />
drive it. The mapping screen even shows you where to drive<br />
for maximum efficiency, and weigh bars in the frame mean you<br />
know how much is left at all times.<br />
1. The spreader has a dual option three point linkage hitch position.<br />
2. Two Kuhn CCI 100 monitors working in tandem<br />
3. The lever action manually folding cover<br />
While spreading, the Kuhn CCI 100 control monitor and the<br />
three main spreading mechanisms work in perfect harmony, and<br />
it hinges around the hydraulically operated spinners.<br />
As product drops out of the bin on to the spinners it creates a<br />
pressure build-up against the hydraulic flow. Sensors detect the<br />
pressure changes and send information to the control monitor,<br />
which automatically opens and closes the delivery chute to<br />
maintain the desired rate. It can also adjust the drop point on to<br />
the spinner to change the width off spread. These calculations<br />
are repeated every second.<br />
At one stage I begin to overlap an area that has already been<br />
spread so the monitor automatically changes the point at which<br />
the fertiliser is dropped on to the spinner to reduce the spread<br />
width on the right-hand side.<br />
The chute closes a bit and slows the spinner so the spread<br />
width narrows on that side while still maintaining the correct<br />
application rate.<br />
Rhys Baxter operates the spreader for Webber & Chivell and he<br />
reckons it’s going great so far.<br />
“It’s probably easier to operate than any of the other spreaders<br />
I’ve used and because the computer sets all of the rates and<br />
spread patterns automatically I never have to get my hands<br />
dirty,” Baxter says.<br />
“Judging by the thickness of steel in the frame and headstock<br />
it’s not going to break in a hurry either.”<br />
Just as a point of interest the Kuhn spreader has category three<br />
linkage as standard and is capable of spreading up to 500kg per<br />
minute, so depending on your speed the application rates are<br />
infinite.<br />
The 310hp (231kW) JCB with weights on the front is more than<br />
up to the task of carrying the Axis 50.1 and I think you could get<br />
away with a fair bit less if paddock conditions allow.<br />
This is a very clever design and the combination of engineering<br />
and technology is truly mind boggling. Well worth a look.<br />
Looking for a<br />
Spreader?<br />
Search for ‘spreader’ on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
or type the TA or DIY code<br />
shown here into the<br />
keyword search field<br />
$27,500<br />
TA974340<br />
KUHN AXIS 50.1W. Linkage Granular Spreader,<br />
comes with trailer. • NSW 02 8315 0204<br />
$26,400<br />
TA1034027<br />
KUHN AXIS 40.1W. Linkage Spreader, approx<br />
3000L capacity. • NSW 02 8315 0204<br />
$49,500<br />
TA996103<br />
KUHN KNIGHT. Fertiliser Spreader. •<br />
QLD 07 3171 1832<br />
52 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
SAMMUT<br />
AGRICULTURAL MACHINERY<br />
All the latest gear and greatest innovations<br />
Phone: (02) 4579 6511 Mobile: 0414 423 680<br />
Fax: (02) 4579 6522 Email: sales@sammut.com.au<br />
67 Joshua Road, Freemans Reach NSW 2756<br />
TOSCANO MULCHER<br />
H/D construction<br />
Double or single side linkage<br />
Optional hydraulic side shift<br />
Sizes from 1.5 to 4mtr<br />
S359. TA1025453.<br />
Price from $5,000 + GST<br />
SAMMUT TRUCK TRAYS<br />
H/D Australian made<br />
3mm or 5mm floor<br />
Custom build<br />
Chassis modifications<br />
New and used trucks available. S360. TA1025472.<br />
PRICE FROM $8,000 + GST<br />
SAMMUT HARDOX TIPPER BODIES<br />
H/D build. One piece sides, 2 way gate<br />
Optional well hoist or twin under body. Optional drop sides<br />
Custom build. Colour of choice<br />
Sand blasted and finished in 2-pac<br />
New and Used trucks available. S362. TA1025485.<br />
From $25,000 + GST<br />
UNITED IMPLEMENTS BOX GRADER<br />
Made in USA<br />
Heavy duty build<br />
Hydraulic lift wheels<br />
Hydraulic angle adjustment<br />
1800mm to 3600mm. S363. TA1025493.<br />
Price from $4,800 + GST<br />
SAMMUT GEARMASTER TURF MOWER<br />
H/D Australian made<br />
Full gear drive, Stainless deck<br />
75 HP gearboxes, 3pl or trailing<br />
Sizes from 1.5 mtr to 12mtr. S364. TA1025498.<br />
Price from $15,000 + GST<br />
SAMMUT MILL MUD SPREADERS<br />
H/D Australian made<br />
Full hydraulic drive, Single or 3 row<br />
Front feed, Single or double axle<br />
Optional rear spinners<br />
Sizes from 8m3 to 30m3. S365. TA1025500.<br />
Price from $28,000 + GST<br />
SAMMUT ORCHARD / VINEYARD SPREADER<br />
H/D Australian build<br />
Front or rear delivery. Sizes from 2m3 to 18m3<br />
Optional telescopic conveyor, Optional end rotor or end spinner<br />
Custom built to suit your requirements. S366. TA1025523.<br />
Price from $28,000 + GST<br />
SAMMUT SPREADERS<br />
H/D Australian made<br />
Full hydraulic drive<br />
We can custom build. Optional front feed<br />
Optional side delivery. Chain or belt floor<br />
Sizes from 2m3 to 30 m3. S367. TA1025524.<br />
Price from $18,000 + GST<br />
FIMAKS VERTICAL FEED MIXERS<br />
Hardened bin and floor. H/D Comer Italian gearboxes<br />
Sizes from 3m3 to 30m3. Scales, In cab controls<br />
Optional folding conveyor with optional length<br />
Reduction box. S371. TA1025537.<br />
From $25,000 + GST<br />
TOSCANO STONE BURIER<br />
Extra heavy duty<br />
Hydraulic lift roller<br />
Gear drive<br />
Anti-pan blades<br />
2200mm to 3200mm. S369. TA1025532.<br />
Price from $16,900 + GST<br />
TOSCANO SPEED DISC<br />
Heavy duty<br />
Hydraulic lift crumble roller<br />
560mm discs<br />
3pl and trailing<br />
2.5 mtr to 6mtr (trailing ). S368. TA1025525.<br />
Price from $11,000 + GST<br />
For more info please visit us at www.sammut.com.au<br />
FIMAKS MUCK SPREADERS<br />
From 5 tonne to 30 tonne<br />
Heavy Duty conveyor chain, Slurry door, In cab controls<br />
Twin vertical beaters with bottom spinner<br />
Suitable for all your hard to spread products etc<br />
Wet cow manure, mulch, green waste etc. S373. TA1025543.<br />
From $25,000 + GST<br />
FFM-FP-5190448-A
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
Hill country hero<br />
Jaiden Drought wondered<br />
whether the Agrex XPI<br />
Spreader filled a gap for a<br />
high-end spreader in this<br />
2015 review for <strong>Farm</strong><br />
Trader NZ<br />
Hits<br />
Stainless steel is used on the most corrosion<br />
prone areas of the machine<br />
Special paint coating on the rest of the machine<br />
also helps fight the corrosive fertiliser<br />
Spreading veins and shutter opening angle can<br />
be altered by hand without tools<br />
Computer controller will adjust spreading rate to<br />
suit forward speed which is particularly valuable<br />
on hill country<br />
Hydraulic shutter control is also standard if there<br />
is an electrical issue<br />
The left and right shutter are individually<br />
controlled which gives greater flexibility around<br />
obstacles such as troughs or drains<br />
Spreading widths between 12 and 32m<br />
Rubber strips between the different metal<br />
sections of the bin stop vibration and long-term<br />
will stop it cracking<br />
Misses<br />
It sits very close to the tractor, which is great to<br />
keep the weight close to the tractor but makes<br />
hooking up the machine a tight squeeze<br />
Even though this machine had little use some<br />
corrosion was already evident on the spreading<br />
veins<br />
Italian manufacturer Agrex is well recognised for its wide<br />
product range, which apart from fertiliser spreaders consists<br />
mainly of grain handling equipment.<br />
Italian equipment hasn’t always been well renowned for<br />
outstanding build quality in the past and, when coupled with the<br />
corrosive nature of fertiliser, would have most running scared.<br />
However, this Agrex machine looks to be well designed and built<br />
using stainless steel components on the bottom third of the<br />
machine where the most corrosion traditionally takes place.<br />
Lucerne growers Sam Pye and his son Andrew, who operate a<br />
250ha property in South Canterbury, are predicting the new Agrex<br />
spreader will mean they can eliminate the expense of external<br />
contractors and use features to help use fertiliser better on the<br />
rolling hills that make up a large portion of the property.<br />
The Agrex XPI fertiliser spreader range has a standard hopper<br />
capacity of 1,500 litres, which equates to roughly one tonne of<br />
urea. For relatively little expense however this can be increased to<br />
2,000 litres with an extension, or 2,500 litres with two extensions,<br />
neither of which require any alteration to the standard base. The<br />
stainless steel discs make it possible to accurately spread from 12<br />
to 32 metres with a variety of fertiliser types.<br />
On the standard machine, opening and closing of the distribution<br />
shutters is hydraulically operated with two spools needed. If,<br />
for whatever reason, the computer isn’t working, it can still be<br />
operated manually and is possible to open both gates or just the<br />
right or the left for spreading near around drains and troughs.<br />
All components in contact with the fertiliser are stainless steel;<br />
different levels of stainless steel are available with a full stainless<br />
bin an option on the trailing models.<br />
With the electronic rate control on our test machine, this works<br />
out the forward speed of the tractor (via a little roof aerial) and<br />
if this drops (on a hill or corner for example) the rate of fertiliser<br />
coming through the distribution slot is also altered. For the Pyes<br />
this was the main drawcard to this particular spreader over<br />
competitor machines, that on their challenging country, fertiliser<br />
is applied accurately independent of forward speed, so the<br />
hills and corners are not coated in fertiliser due to slower<br />
operating speeds.<br />
A slow speed (60rpm) horizontal agitator is fitted as standard<br />
4 1. All spreaders come with the rear<br />
road lights which is always handy to<br />
avoid the long arm of the law<br />
2. The bottom portion and the entire<br />
spreading area is stainless steel to<br />
combat corrosion<br />
3. Low speed agitators keep a<br />
constant flow of fertiliser to the<br />
spreading discs to ensure accuracy<br />
4. In-cab controller<br />
to each funnel to keep the fertiliser consistently hitting to disc to<br />
achieve the uniform spread pattern.<br />
The spreading veins on the disc and where the material hits the<br />
disc can be altered by hand without any tools. This will vary the<br />
spread pattern to achieve the desired spreading width depending<br />
on the flight properties of the granules (i.e., urea vs. DAP will have<br />
different flight properties to reach a 24-metre uniform spread).<br />
A ladder, road lights, rear wheel (stainless) mud guards and the<br />
grates in the hopper are fitted standard to the machines; a water<br />
proof roll back cover is an additional accessory.<br />
The In-cab controller automatically adjusts the quantity of<br />
fertiliser being spread (kg/ha) in correlation to the forward speed<br />
of the tractor.<br />
Operators can also store quick settings on the monitor, i.e., one<br />
for super, one for urea, etc., and the computer will automatically<br />
adjust the settings. Although the system doesn’t have scales,<br />
if you know your spreading rate, spreading width and how<br />
much fertiliser you put into the unit, the monitor can judge total<br />
hectares covered, depending on how good your eye is at judging<br />
24m gaps.<br />
This system can be set up with GPS and is compatible with<br />
most common brands of GPS Trimble, Greenstar, TeeJet, etc. The<br />
spreader computer connects directly to the GPS unit to receive<br />
speed pulses to give full proof of placement and scales on the<br />
slightly large model for those who really want to keep track of the<br />
finer details, or those who struggle with the 24-metre gaps.<br />
For Sam and Andrew, if the weather looks good around 10am,<br />
most of the farm could be done by dinner time – and it is hard to<br />
put a price on that.<br />
Looking for a<br />
Spreader?<br />
Search for ‘spreader’ on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
or type the TA or DIY code<br />
shown here into the<br />
keyword search field<br />
$22,132<br />
TA1002178<br />
AGREX KYLO. A professional spreader with<br />
large fertiliser capacity. • NSW 02 8315 0055<br />
$POA<br />
TA558283<br />
AGREX 0.75 TONNE MANURE SPREADER. 3PL.<br />
• NSW 02 6171 3997<br />
$10,648<br />
TA1002174<br />
2018 AGREX DDI XDI. A professional spreader<br />
with large fertiliser cap. • NSW 02 8315 0055<br />
54 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
SPREADER REVIEWS<br />
Brent Lilley headed to Christchurch<br />
in 2014 to check out the extensive<br />
features of the Amazone ZA-TS Profis<br />
Hydro spreader for <strong>Farm</strong> Trader NZ<br />
1<br />
2<br />
3<br />
4<br />
Highly accurate<br />
The Amazone ZA-TS spreader combines new technologies<br />
with clever design features to offer huge savings and<br />
benefits to farmers.<br />
Built from a single piece of steel to better resist corrosion, the<br />
700-litre base for the main hopper is actually made up of two<br />
hoppers, which deliver material separately to each spinner.<br />
An aggressive-looking agitator is positioned in the bottom<br />
of each hopper to keep material flowing freely – reversible<br />
if necessary – while a grate prevents lumps from reaching<br />
the spinners.<br />
A welded steel bin above the hopper gives the machine I<br />
tested its 3,200-litre capacity, while a safety ladder on each<br />
side of the machine gives access to a large top opening, with a<br />
canvas cover to keep moisture out.<br />
Safety panels and road lights are neatly incorporated into the<br />
outside of the hopper and are definitely required, as the size of<br />
the hopper completely obscures the tractor’s lights.<br />
The hopper mounts to a separate weighing frame via three<br />
points; a fixed link at the top, along with two load cells at the<br />
bottom.<br />
These constantly weigh the remaining amount of<br />
material in the hopper and are impressively accurate<br />
on flat ground.<br />
The Amazone ZA-TS Profi Hydro allows the operator to adjust<br />
the point from the hopper to the spinning disc where material is<br />
dropped, helping it maintain an even spread pattern even as the<br />
spreading width increases.<br />
Its two stainless steel spinners both use two sets of vanes<br />
on each disc. The first set is in use for normal spreading<br />
and feature angled tips (allowing the spreading width to<br />
be adjusted within the range by simply changing the<br />
spinner speed).<br />
While this machine runs TS2 vanes on the spinners (giving<br />
them a spreading width from 18m to 36m), there are two<br />
other set-ups that allow for spreading widths from 12m up<br />
to 54m – and the machine is able to spread urea out to 44m<br />
in Australia.<br />
Each spinner also features a second set of shorter stubby<br />
vanes, powered by a separate shaft inside the driveshaft, which<br />
can rotate the central delivery vanes on the disc by 10 degrees –<br />
useful for boundary spreading.<br />
Drive for the spinners comes via a hydraulic motor powered<br />
through a load sensing coupling on the tractor, while the spinner<br />
speed is adjusted electronically.<br />
On the cab monitor, the set spreading width is divided into<br />
eight sections on each side. The sections can be shut off one by<br />
one, starting from the outside on each side. This is an invaluable<br />
and very clever feature with huge savings when spreading<br />
triangles or thin strips.<br />
Flow rate of material to the spinners is controlled with an<br />
electronically controlled shutter on the drop point. This not only<br />
ensures a fast and accurate shut off, but also varies the flow<br />
rate automatically as the spreading width is changed. When<br />
boundary spreading, this feature can provide huge savings in the<br />
amount of material being spread.<br />
All of the features mentioned, such as spreading width, drop<br />
point, flow rate, section control and boundary control, can be<br />
controlled manually by pushing buttons on the monitor. But<br />
this relies on your quick reflexes; the real beauty of the system<br />
comes when you combine it with a GPS receiver, plugged into<br />
the unit’s ISOBUS controller.<br />
This automates most of the spreader’s features. Once you’ve<br />
set your spreading width, application rate and drop point, you<br />
simply drive around the outside of the area to be spread to map<br />
it. Once this is calculated, you’re all set.<br />
This is a seriously smart and well thought-out machine. The<br />
build quality throughout is excellent, with the single piece deep<br />
pressed hopper base and stainless steel components sure to<br />
extend the life span of the machine.<br />
A stand-out point from nearly all other machines on<br />
the market is the moveable drop point, which can be<br />
calibrated with material being spread to achieve an even<br />
spread pattern regardless of the spreading width the operator<br />
has chosen.<br />
This is a serious contender in the top of the highly accurate<br />
spreader market. For those spreading large amounts of high<br />
value materials, I’m sure the extra initial outlay will be easily<br />
recouped.<br />
1. The large 3,200-litre capacity hopper<br />
uses a single piece, deep-pressed base to<br />
prevent build up and improve flow<br />
2. Amatron 3 screen allows impressive<br />
control over the machine<br />
3. Handy parking stand folder down under<br />
the machine and features caster wheels<br />
4. Spreading discs feature two different<br />
length vanes which are used separately<br />
Amazone ZA-TS<br />
Profis Hydro<br />
Working width 18–54m<br />
Hopper capacity<br />
Payload<br />
Drive<br />
3,200 litres<br />
4,500kg<br />
Linkage Category 3<br />
Remote valves<br />
required<br />
Electronics<br />
Electric over hydraulic<br />
One load sensing<br />
Fully ISOBUS compatible<br />
Hits<br />
One piece deep pressed hopper base to prevent<br />
material build up and smooth flow<br />
Parking stand with caster wheels permanently<br />
attached to the machine for easy storage when<br />
not in use<br />
Weigh cells constantly monitor the amount of<br />
weight in the hopper and the monitor can adjust<br />
the flow rate to match the desired spreading<br />
rate<br />
Separate spreading vanes for boundary and<br />
water course spreading<br />
Drop point can be calibrated to achieve even<br />
spreading regardless the set working width<br />
Spreading width can be narrowed or shut off<br />
automatically when spreading triangle when<br />
coupled with a GPS receiver<br />
Misses<br />
Limited space between the machine and the<br />
back wheels<br />
Fine particle materials such as lime will not<br />
spread<br />
$POA<br />
TA1036587<br />
$32,000<br />
TA1038338<br />
$38,000<br />
TA1027932<br />
$26,400<br />
TA870101<br />
2019 AMAZONE ZA-TS. 3200 Profis Tronic. • WA<br />
08 6166 7800<br />
2014 AMAZONE ZA-M 3000 ULTRA spreader.<br />
Linkage, 4200L, scales. • QLD 0428 054 644<br />
AMAZONE ZAM 3000 LINKAGE SPREADER.<br />
Full auto control, hyd drive. • NSW 02 8315 0164<br />
2011 AMAZONE ZA-M ULTRA. 3PL Fertiliser<br />
Spreader, 4200L capacity. • NSW 02 8315 0204<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 55
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
Price of perfection<br />
Jaiden Drought was<br />
mightily impressed<br />
with the Giltrap 5001<br />
spreader when he tested<br />
it on his Taranaki farm<br />
back in 2011 for <strong>Farm</strong><br />
Trader NZ<br />
1. This Giltrap 5001 spreader holds 4.3<br />
tonnes of urea and has excellent driver<br />
visibility<br />
2. The belt is driven by an oil-filled, sealed<br />
gearbox and is controlled by the in-cab<br />
monitor and these valves<br />
3. The 850mm-wide belt and low bin height<br />
mean the machine can spread multiple<br />
products and has great visibility and<br />
excellent stability<br />
4. The DICKEY-john monitor is simple to use,<br />
gives on the go information and is the<br />
brains behind the spreader’s accuracy<br />
Hits<br />
Ability of the proportional hydraulic valve to<br />
constantly recalculate<br />
Electric engagement switch<br />
Low centre of gravity<br />
Stainless steel bin, belt adjusters and fertiliser<br />
deflectors behind the spinners<br />
Misses<br />
The in-cab monitor is clumsy and heavy and<br />
the screen is hard to read in sunlight<br />
Stainless steel spinners would help combat<br />
corrosion<br />
am not sure where the rationale lies for Giltrap’s numbering<br />
I system, but the 5001 spreader is a beauty – with capacity for<br />
six tonnes of super, 7.8 tonnes of lime and 4.3 tonnes of urea.<br />
The spreader is a user-friendly, sturdy machine that can adapt<br />
to a number of tasks while fighting corrosion as well – if not<br />
better – than any machine on the market.<br />
Key features include its hydraulic drive, which drives the<br />
850mm belt directly from the rear of the machine, with no<br />
chains or sprockets to create downtime, with speed set by a cab<br />
computer into which the operator will punch kg/ha rates, etc.<br />
The proportional hydraulic control valve sends a precise<br />
amount of oil to the hydraulic belt drive, which is determined by<br />
the computer, to keep the kg/ha rate spot on.<br />
This is adjusted automatically on the go and takes into account<br />
the ground speed, spinner rpm, the rear door height, product<br />
density and the desired kg/ha rate.<br />
All Giltrap models require a minimum of 60 litres per minute<br />
oil flow to keep the spinners at 1,000rpm and the belt speed<br />
adequate for optimum spreading.<br />
Ideally, this valve shouldn’t be flicking on/off all the time, as<br />
this would indicate the rear door is open too much for the<br />
application rate. A better solution is to lower the door to the next<br />
setting and have the valve remaining on most of the time, but<br />
flicking off occasionally if ground speed reduces, etc.<br />
If I had to be critical of one part of the machine, it would be the<br />
DICKEY-john monitor and electrical system. The screen was hard<br />
to read in the sunlight and its size didn’t justify the big, heavy<br />
controller, but it did work well and was relatively idiot-proof –<br />
providing you didn’t push too many buttons at once.<br />
Before using the spreader for the first time on a particular<br />
tractor, operators will need to go through a calibration process,<br />
which doesn’t take particularly long but the engine revs must be<br />
set at the same speed being used while spreading.<br />
The calibration allows the computer to adjust the proportional<br />
hydraulic valve to the oil flow pressure and the balance of that<br />
particular tractor dictates how it will achieve the desired kg/ha<br />
rate. This only has to be done each time you put it on a different<br />
tractor, not every time you use the machine.<br />
The engagement switch, kept separate in the control box, stops<br />
the proportional hydraulic valve<br />
moving the belt while keeping<br />
the oil flowing and the spinners<br />
constant at 1,000rpm.<br />
The beauty of this feature is that<br />
you can spread the paddocks in<br />
runs with headlands, rather than<br />
4<br />
going around and around, so runs<br />
can be made up and down the<br />
straightest edge of an unevenly-shaped paddock, which will<br />
save on the amount of fertiliser used.<br />
One option which I thought was an excellent idea is an optional<br />
valve on right-hand side of the machine which reverses the<br />
direction of the spinners, meaning you can spread mulch/solid<br />
effluent or chicken manure.<br />
The independent chassis is made from 350 RHS steel and is<br />
mounted to the 3mm 304-grade stainless steel bin via bolts to<br />
reduce the risk of welds cracking and chassis twisting when<br />
operating in rough ground.<br />
Other key components, such as belt adjusters and fert<br />
deflectors behind the spinners, are stainless steel, plus belt drive<br />
and idler rollers are hot-dip galvanised to try and combat the<br />
ever-present threat of corrosion.<br />
The only pitfall I could see in build quality was that the spinners<br />
were already showing signs of deterioration, even though<br />
this was only a demo machine. Maybe having stainless steel<br />
spinners could be an improvement?<br />
It is unusual to use a machine for the first time and find nothing<br />
wrong with it, or just some little thing that particularly annoys<br />
you, but I can honestly say that apart from the size of the in-cab<br />
monitor (which is not a major issue), there is very little I would<br />
change about this machine.<br />
Looking for a<br />
Spreader?<br />
Search for ‘spreader’ on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
or type the TA or DIY code<br />
shown here into the<br />
keyword search field<br />
$96,250<br />
TA1026199<br />
2018 GILTRAP 12T-10001. New trailing 10,000L<br />
spreader. • WA 08 6166 7800<br />
$39,995<br />
TA478581<br />
GILTRAP 2501. 3.9 tone capacity belt spreader,<br />
hydraulic drive. • QLD 07 3073 8164<br />
$35,200<br />
TA1017984<br />
2017 GASON 7370. Trailing belt spreader, 7<br />
tonne capacity. • NSW 02 8315 0204<br />
56 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
03 8547 8755 bill@pickman.com.au www.pickman.com.au<br />
5-7 Luisa Avenue, Dandenong South, VIC 3175<br />
MAMMUT 413HT AGRI LOADER<br />
3500kg capacity, Parallel lift, 9000kg operating weight 97kW<br />
(130hp) Cummins 6BT5.9-C 130 Diesel Engine Certified ROPS<br />
Cabin with air ride seat, A/C, radio & camera. 3 speed electronic<br />
power shift transmission, 40km/h MAX Donaldson air filer,<br />
continental Hydraulic hoses throughout vehicle. Hydraulic quick<br />
hitch, pilot control 3.6m Load over height, 3.05m dumping<br />
height. S3. TA985852.<br />
$64,900 Inc GST<br />
MAMMUT TL3000 3 TONNE TELESCOPIC WHEEL LOADER<br />
3000kg lifting capacity, 7300kg operating weight. Cummins<br />
125HP Diesel engine, 4 speed electronic power shift<br />
transmission, 40km/h MAX. Standard Bobcat skid steer quick<br />
hitch, pilot control, ROPS cabin with air ride seat, A/C, radio and<br />
camera, synchronised extraction and lifting system. S5. TA985855.<br />
$53,900 Inc GST<br />
SUMMIT 828 2.8 TONNE WHEEL LOADER<br />
2019, 2800kg lifting capacity, 6800kg operating weight, 125HP<br />
FEV diesel motor, 2 speed powershift, hydraulic quick hitch, 4 in<br />
1 Bucket, Pallet fork, A/C ROPS cabin with radio & camera.<br />
Comes with 4 in 1 bucket, pallet forks & spare wheel. S9. TA985903.<br />
$31,900 Inc GST<br />
SUMMIT 820 2 TONNE WHEEL LOADER<br />
2019, 2000kg lifting capacity, 5300kg operating weight, 3.4m<br />
dumping height, 4m lifting height, 102HP FEV Diesel motor, 2<br />
speed powershift, hydraulic quick hitch, A/C ROPS cabin with<br />
radio & camera. Comes with 4 in 1 bucket, pallet forks & spare<br />
wheel. S12. TA985927.<br />
$24,900 Inc GST<br />
SUMMIT H20 2 TONNE 4WD ROUGH TERRAIN FORKLIFT<br />
2000kg capacity, 4WD, 3 meter lift height, 2 stage mast with<br />
side shift, 50hp Chinese Perkins 498BT diesel motor, 2 speed<br />
powershift transmission, 2.25m overall height. S8. TA985871.<br />
$20,900 Inc GST<br />
SUMMIT H30 3 TONNE 4WD ROUGH TERRAIN FORKLIFT<br />
With 2 stage 3 meter mast, 3000kg capacity, 4WD, 3 meter lift<br />
height, 2 stage mast with side shift (3 stage 4.5m / 2 stage 4m<br />
mast available). 50hp Chinese Perkins Xinchai 498BT diesel<br />
motor, 2 speed power shift transmission. A/C ROPS cabin with<br />
heater, radio & reverse camera. S7. TA985867.<br />
$26,500 Inc GST<br />
MAMMUT EXPLORER 4WD ROUGH TERRAIN FORKLIFT<br />
2019, 3500kg capacity, on-demand 4WD, 4.5m lifting height,<br />
59hp Japanese Yanmar, 4TNE98 diesel engine. 3 stage<br />
container mast with sideshift. S6. TA985863.<br />
$42,500 Inc GST<br />
GENERIC/UNKNOWN 1.8M 3 TONNE CLASS 3<br />
Forklift Slippers. S10. TA985906.<br />
$330 Incl GST<br />
HYDRAULIC FORKLIFT BUCKET<br />
.. S11. TA985907.<br />
$2,750 Inc GST<br />
FFM-FP-5211238-A<br />
2 Year Warranty - Australia Wide Delivery
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
4<br />
Science of spreading<br />
In 2017 Jaiden Drought<br />
tested a Bredal F8 fertiliser<br />
spreader, kitted out with a<br />
Topcon X30 GPS system and<br />
crop spec sensors, for some<br />
real-time nitrogen reporting.<br />
And he wasn’t disappointed<br />
1. With high ground clearance, sightscreens<br />
and individual doors for each belt,<br />
the Bredal F8 fertiliser spreader has<br />
everything.<br />
2. The real-time N readings on the ISOBUS<br />
display<br />
3. A large amount of stainless steel is used<br />
at the business end of the spreader to<br />
combat corrosion<br />
4. The twin-floor belt with independent<br />
hydraulic drives ensure highly accurate<br />
spreading using both section and border<br />
control<br />
Bredal F8<br />
Fertiliser Spreader<br />
Capacity<br />
5.7 cubic metres<br />
Capacity with hopper 7.5 cubic metres<br />
extension<br />
Net weight<br />
2,800kg<br />
Total length 6.6m<br />
Std. spreading unit SPC4500-2<br />
Hopper length 3.92m<br />
Hopper width<br />
2m<br />
Loading height min 2.5m<br />
Loading height max<br />
Min. width outside of<br />
wheels<br />
Max. width outside of<br />
wheels<br />
3m<br />
2.25m<br />
2.8m<br />
travelled to Canterbury, New Zealand, to meet farm<br />
I manager Mark McCully and check out the Bredal F8 precision<br />
fertiliser spreader, kitted out with Topcon’s X30 GPS system and<br />
nitrogen sensors.<br />
This trailed spreader will give you highly accurate spreading<br />
from a large 5,700-litre capacity bin, which sits on a four-piece<br />
(10 tonne) weigh cell incorporated chassis with an integrated<br />
tilt sensor. The sensors can perform real-time weighing even<br />
on hilly terrain, ensuring the correct amount is being dosed out<br />
both the left- and right-side belts.<br />
Each side of the spreader uses a separate belt to deliver the<br />
correct amount of fertiliser, whether it is on a field border (using<br />
the border control), a triangle (using the section control), or<br />
simply turning a corner.<br />
The door height adjustment is made in 20mm increments and,<br />
as long as the ISOBUS controller knows this, it uses the belt<br />
speed (either faster or slower) to deliver the correct dose.<br />
Once it comes out of the belt, the material is sent down the<br />
electronically controlled chutes – with automatic flow correction<br />
built in – which drops the product at the exact point on the disc.<br />
The chute is operated by electric actuators via the ISOBUS<br />
controller. Once the spreading width is chosen, the chutes are<br />
adjusted automatically as well as individually on both the right<br />
and left sides. The same applies to headland spreading.<br />
Back from software to hardware – the drive to the spreading<br />
discs is power take-off to two V-belts at the rear under the<br />
spinners. This is specced as such because it is ideally suited for<br />
24m–36m spread widths.<br />
Also fitted to our test machine were the optional H-discs for<br />
spreading fertiliser types such as urea, potash, and ammonium<br />
sulphate with widths of more than 24m.<br />
ACCURACY<br />
McCully is passionate about boosting yield potential, and does<br />
so by using tramlines, starting with 8m cultivation and planting<br />
through to 30m spreading and spraying, all full real-time<br />
kinematic (RTK) GPS, with about 2.5cm accuracy.<br />
Combined with yield mapping and full-paddock nitrogen<br />
reports, this gives a massive amount of information to ensure<br />
the best return on investment from the land.<br />
Bredal gets its spreading data from the practical infield method<br />
of testing by accurately weighing the actual quantity collected in<br />
each tray.<br />
This is something McCully also does with the supplied Bredal<br />
calibration kit, which consists of seven test trays, seven<br />
separators, seven measuring tubes, a granule strength tester, a<br />
funnel, and a sieve box to check the granule sizes.<br />
OTHER FEATURES<br />
Other features include: pring-loaded tightening of belts provides<br />
for their correct fixing way; BPW axle is a powerful 10-tonner<br />
equipped with hydraulic brakes; manual roll-top cover, although<br />
hydraulic option is available; the entire machine is either<br />
heat treated with a two-pack paint or in high-corrosion areas;<br />
stainless or plastic for long service life<br />
CROPSPEC<br />
CropSpec consists of two sensor units mounted on top of the<br />
cab. Using infrared beams that work on the red-edge scale, the<br />
units measure plant reflection to determine chlorophyll content.<br />
This data can be used to either set an average application<br />
across a paddock, or to build a variable-rate application, either<br />
before spreading or in real time, using the Topcon CropSpec and<br />
VRC software together.<br />
The spreader controller on our machine was run through<br />
ISOBUS with additional CropSpec sensors to a Topcon X30<br />
display with a 12.1-inch (30.7cm) full colour touchscreen and a<br />
user-definable dashboard that can run real-time variable-rate<br />
control for up to eight products.<br />
THE BOTTOM LINE<br />
Fertilisers vary – granules can be too soft in one load and too<br />
solid in another, which can create a massive variation on spread<br />
pattern and also requires continuous calibration.<br />
This highlights the importance of quality machinery and<br />
technology, such as the combination of the Bredal F8 precision<br />
spreader and Topcon’s X30 GPS system, to ensure you get every<br />
ounce of accuracy possible, and that is money well spent.<br />
Looking for a<br />
Spreader?<br />
Search for ‘spreader’ on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
or type the TA or DIY code<br />
shown here into the<br />
keyword search field<br />
$162,800<br />
TA1038781<br />
2017 BREDAL K-125 K125-XE. Hydraulically<br />
driven spinner discs. • NSW 02 9199 7757<br />
$45,000<br />
TA1010198<br />
2017 BREDAL 4000. 3PL spreader, stainless steel<br />
hopper. • WA 08 6500 0956<br />
$POA<br />
TA823156<br />
BREDAL BELT SPREADER. 7 Ton. • NSW 02<br />
6171 3997<br />
58 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
AGRISON<br />
Best quality & value without compromise<br />
Call 1300 651 830<br />
www.agrison.com.au<br />
10 Tonne/20 Tonne<br />
Manure Spreaders<br />
Made in Europe<br />
Vertical Spreader<br />
Hydraulic Gate<br />
FROM $34,990<br />
ME850<br />
Mini<br />
Excavator<br />
Front Blade x3 Buckets X1 Ripper<br />
x1 Auger x1 Log Grabber<br />
ME8000 Excavator<br />
Yanmar Engine<br />
Front Blade<br />
x5 Buckets<br />
Ripper<br />
Steel Tracks<br />
Hydraulic Quick Hitch<br />
360°Rotation<br />
NOW $13,990 INC GST<br />
NOW $69,990 INC GST<br />
Front Blade Genuine Yanmar Diesel Engine<br />
x3 Buckets x1 Ripper x1 Log Grabber<br />
Eaton Swing Motor<br />
3T Forklift<br />
4500mm 3 stage container mast<br />
Side shift 1070 tynes<br />
Pneumatic tyres<br />
55hp Diesel engine<br />
Automatic transmission<br />
LED Lights<br />
FREE Freight to depot Australia wide<br />
NOW $21,990 INC GST<br />
ME1600<br />
1.6 Tonne<br />
Excavator<br />
NOW $23,990 INC GST<br />
10T Road<br />
Grader<br />
Nationwide Delivery. Finance Available<br />
ME2300<br />
2.3 Tonne<br />
Excavator<br />
Front Blade Mud Bucket x3 Buckets<br />
x1 Ripper Pilot Control Rubber Tracks<br />
360 Degree Rotation<br />
NOW $79,990 INC GST<br />
NOW $27,990 INC GST<br />
Portable Cabin<br />
5.95 x 2.95 x 2.70 m<br />
x1 Bedroom<br />
x1 Bathroom<br />
x2 Double glazed windows<br />
x1 Glass Sliding Door<br />
FROM $14,990 INC GST<br />
Rear Ripper<br />
Front Blade<br />
Fully Articulated<br />
Air Conditioned Cabin<br />
AGRISON<br />
www.agrison.com.au<br />
Call 1300 651 830<br />
A: 2098-2108 Hume Highway,<br />
ISO CERTIFIED COMPANY<br />
Campbellfield, VIC 3061<br />
E: contact@agrison.com.au AgrisonTractor AgrisonTractors agrisontube<br />
* Conditions apply. Offers are available while stocks last. All prices GST inclusive. Freight is additional. Finance available to approved applicants. Pictures shown are for illustrative purposes only.
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
Sweet option<br />
Tom Dickson travelled<br />
to Far North Queensland<br />
in 2016 to look at a new<br />
spreading solution for sugar<br />
cane, thanks to farmer and<br />
engineer Michael Camilleri<br />
1. Cecchi’s New Holland TS135 pulls the<br />
Reefa easily, but adds extra weight and<br />
traction are important on hilly ground<br />
2. The stool splitting application method puts<br />
the fertiliser directly into the rootball of<br />
the plant<br />
3. Grates on the top of the bin prevent debris<br />
from getting in and causing blockages<br />
4. The bin on the trailling unit carries up to five<br />
ton of fertiliser<br />
Reefa<br />
Bin capacity<br />
Tank<br />
Coulters<br />
Working<br />
widths<br />
Bin fill height<br />
Five tonne (mixed fertiliser)<br />
600L<br />
Three or four<br />
1.53m-1.83m row width x<br />
three rows<br />
2.375m – min<br />
Transport 3.5m width x 2.57m height<br />
dimensions<br />
Tyre size 14.9 x 28cm<br />
Ply rating 10<br />
Wheel spacing Variable from 1.52m-2.15m<br />
Gauge wheel Thread adjust, 5 x 10cm size<br />
Frame tubing 125mm x 125mm x 9mm<br />
frame 100mm x 100mm x<br />
9mm hitch and toolbar<br />
Drive hydraulic PWM valve controlled<br />
Fram control Hydraulic cylinder<br />
Optional Flashing & warning tail<br />
lamps, wash tank, lid,<br />
hopper &/or dispersion box,<br />
camera, ground drive<br />
The <strong><strong>Farm</strong>s</strong>can Ag auto rate<br />
controller delivers precise<br />
application rate regardless<br />
of speed.<br />
Leaning fertiliser is more effective on sugar cane when<br />
applied directly into the rootball – splitting the sugar stool<br />
– Innisfail sugar cane grower and engineer Michael Camilleri of<br />
Maalacan Engineering teamed up with fellow growers David and<br />
Paul Cecchi to create a new spreader.<br />
Inspired by a Caterpillar dozer’s ripper, Camilleri came up with<br />
the idea of incorporating a parallelogram system for mounting<br />
the coulter, tine and depth gauge wheel that keeps the working<br />
angle of the disc and tine consistent.<br />
It’s the key feature of the Reefa – Responsible Economical<br />
Environmental Fertiliser Applicator – a three-row stool splitting<br />
fertiliser applicator with dual delivery metering units.<br />
The Reefa can also be raised and lowered at the rear on<br />
the transport wheels and also at the front on its dual swivel<br />
single arm drawbar – allowing for tight turns at the end of each<br />
cane row.<br />
The downward pressure on the tine and coulter can be<br />
adjusted through the hydraulic accumulator. It is set on about<br />
400kg of downward pressure, which will allow a breakout if it<br />
encounters a rock under the ground.<br />
The telescopic toolbar is constructed using a 125mm x 125mm<br />
x 9mm square tubing for the centre piece and 100mm x 100mm<br />
x 9mm for each adjustable end. It can cater for row spacings<br />
from 1.53m to 1.83m. When the toolbar is drawn in it reduces<br />
the total width of the machine to less than 3.5m, making it legal<br />
for unrestricted road transport.<br />
It is auto rate controller-ready but can be set up for ground<br />
drive if preferred. The five-tonne bin and metering chambers are<br />
constructed from 4mm marine grade stainless steel with steep<br />
sides for easy flow of product. A hydraulic bin lid provides easy<br />
operation and prevents moisture getting in.<br />
A 600L tank and hydraulic pump for applying sugar cane<br />
grub pesticide, Confidor Guard, makes the Reefa a dual<br />
purpose machine. During our testing we lowered the hydraulic<br />
rams first, then lowered the parallelogram hydraulics until the<br />
coulter discs hit the ground, continuing to build the pressure<br />
until it reached 300psi.<br />
As we pulled away, the coulters effortlessly sliced straight<br />
down to the pre-set depth of 75mm. The 760mm coulter and<br />
tine hardly leave a mark as the unit delivers 500kg/ha of fertiliser<br />
and Confidor Guard right into the root ball of the cane.<br />
For this job we are working to a depth of 75mm, but it is capable<br />
of slicing down to 180mm. The Confidor Guard must be placed at<br />
least 50mm below the surface to be effective.<br />
David Cecchi says that while the 10mm thick coulter disc does<br />
a great job of slicing through his tough red soils, a slightly thicker<br />
one would allow the 20mm thick tine to follow along with less<br />
soil disturbance. The bottom of the bin is divided into three<br />
metering chambers and each of these has two hydraulically<br />
driven metering units.<br />
Because there are two metering units, the bin can be split into<br />
two sections with a divider. While fertiliser is dispensed through<br />
one, another product like lime can go out the other.<br />
Camilleri uses a flexible rubber hose to dispense the Confidor<br />
Guard to the nozzles, saying rigid pipes crack due to the<br />
machine’s continuous vibration.<br />
Only at the end, where the pipe inserts into the tine for the<br />
delivery of chemical underground, does he revert back to about<br />
a 30cm length of stainless steel pipe with an oxyacetylene<br />
heating nozzle on the end. He says the nozzle is more durable<br />
than other spray nozzles on the market and is less inclined to<br />
block up.<br />
The <strong><strong>Farm</strong>s</strong>can Ag auto rate controller delivers precise<br />
application rate regardless of speed, and Cecchi has installed<br />
a base station on his property to improve the GPS signal<br />
consistency even further.<br />
Operators will also need an arrangement to service five lots of<br />
hydraulics, one each for the rear lift, front lift, tool bar extension,<br />
parallelogram system and the hydraulic motors on the metering<br />
units. Cecchi put a diverter valve off one of the lines to operate<br />
the bin lid.<br />
My only criticism is the need for so many remotes. Perhaps<br />
a better design would be one or two sets of remotes servicing<br />
a bank of electronic diverter valves, allowing a lower specced<br />
tractor to operate the machine.<br />
4<br />
60 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
12<br />
MONTH<br />
WARRANTY<br />
Email: sales@sydneybuckets.com.au<br />
MUD BUCKET<br />
HYDRAULIC<br />
GRAB<br />
SIEVE BUCKET<br />
ROCK<br />
BUCKET<br />
BEST<br />
PRICE<br />
GUARANTEED<br />
SPECIALISING IN<br />
3 - 45 TONNE<br />
GP BUCKET<br />
TILT BUCKET<br />
MANUAL GRAB<br />
COMPACTION<br />
WHEEL<br />
EMM-FP-5196047-TS-363<br />
sydneybuckets.com.au<br />
1300 899 344
SPREADER REVIEWS<br />
1<br />
2<br />
3<br />
Up for the challenge<br />
Tom Dickson checked out<br />
the Toogong <strong>Farm</strong> Spreader<br />
from Haze Ag back in 2015,<br />
named for the NSW town<br />
near where it was built<br />
1. In action spreading lime to about 16m<br />
2. D’Angelo turntables and pins give threedimensional<br />
travel through the gooseneck<br />
drawbar<br />
3. Nothing sticks to the uncovered spinner<br />
shafts<br />
4. Every roller can be checked for operation<br />
and replaced through the inspection holes<br />
Pluses<br />
Mine spec hydraulics<br />
Steeper bin sides<br />
50m-wide spread width<br />
Spinner cones<br />
Sealed roller bearings<br />
Individual roller access<br />
Air bag suspension<br />
Chassis strength<br />
Minuses<br />
Cracking polyurethane flare at base of<br />
bin over belt<br />
Haze Ag Toogong fertiliser<br />
spreader<br />
Capacity<br />
Belt<br />
Spread width<br />
Gearbox<br />
Hydraulic<br />
hoses<br />
Hydraulics<br />
Tractor<br />
attachment<br />
Chassis<br />
10 tonnes<br />
1m wide, cleated<br />
50m (maximum)<br />
Sumitomo<br />
four braid<br />
Mine spec<br />
Gooseneck<br />
75x100x6mm RHS<br />
The only limiting factor is<br />
having a loader capable of<br />
filling the spreader quickly<br />
enough.<br />
The refined design of Haze Ag’s Toogong <strong>Farm</strong> Spreader<br />
allows for a spreading width of about 50m for<br />
superphosphate without causing any damage to the structure<br />
of the granulated product.<br />
Approximate spreading widths for each product are: urea<br />
(36m), super (45 to 50m), lime and gypsum (15 to 16m),<br />
chicken manure (16m), and feedlot waste (15 to 16m).<br />
These figures can vary depending on moisture content and<br />
product type.<br />
McDonald Agrimax Fertilisers owners Damian and Sidony<br />
Kelly say their 10-tonne spreader and JCB 3230 tractor give<br />
them the accuracy of a small linkage spreader, but over a<br />
larger width.<br />
“At the moment I am spreading lime at three tonnes per<br />
hectare, travelling about 30km/h at about 16m wide strips,<br />
which equates to around 40ha, or 120 tonnes per hour. The<br />
only limiting factor is having a loader capable of filling the<br />
spreader quickly enough,” he says.<br />
Kelly is using a Topcon monitor for GPS tracking and spreader<br />
functions as well as auto steer. The Toogong spreader does<br />
variable rate control for complete accuracy.<br />
It is running 540/65R34 tyres at 2m centres to follow directly<br />
in the tracks of the JCB Fastrac 3230. The wheels can easily<br />
be adjusted out to 2.7m centres to create a fresh track in the<br />
event of wet boggy conditions and to reduce compaction.<br />
The frame is manufactured with 75mm x 100mm x 6mm<br />
rectangular hollow sections (RHS) and 10mm plate steel is<br />
used for extra support at pressure points.<br />
The spreader’s gooseneck design attaches to a D’Angelo<br />
turntable and pin – widely used in pulling triple road trains in<br />
WA – while the chassis is mounted on air bag suspension with<br />
a stabiliser bar to help prevent body roll on rough ground.<br />
The bin has steeper sides to prevent material sticking onto<br />
the side – with side walls made from 3mm steel and 6mm<br />
steel on the front and back.<br />
The bin also has an inverted V-shaped piece of steel that<br />
runs from the front to the back about one third of the way<br />
down, adding structural strength and preventing heavy lumps<br />
crashing onto the rollers during filling.<br />
It also has extremely aggressive cleats moulded into it, which<br />
help it resist blockages.<br />
The base of the bin is also wider, which in turn led to the<br />
widening of the delivery belt to 1m – allowing a greater flow of<br />
fertiliser to the spinners at a lower turning speed.<br />
EFFICIENT ROLLERS<br />
Haze completely overhauled the roller assembly, making<br />
them from Class 18 PVC, rather than Class 12, and putting<br />
them closer together, replacing three plastic spacers with four<br />
sealed roller bearings.<br />
Beside each roller is an inspection hole for easy checking<br />
and roller replacement, and self-cleaning 200mm rollers with<br />
50mm shafts sit at each end of the belt.<br />
The Toogong spreader has four cast spinner blades per disc,<br />
each blade moulded with a rounded rear side to draw the<br />
fertiliser into the centre of the 6mm disc.<br />
Mounted on the spinner is a polyurethane cone, which controls<br />
where the fertiliser is dropped and does so more gently, with<br />
three different sizes depending on the material being spread.<br />
The discs spin inward, a rarity in the market, but one Haze Ag’s<br />
Richard Hazelton says helps achieve wider material spread,<br />
along with block pattern spread and an overlap in the centre to<br />
ensure no part of the paddock is left undertreated.<br />
“We used to wet [lime] on 40-foot [12m] conveyers but we<br />
could never get it even when we used the spinners in the<br />
conventional direction,” he says.<br />
“Back then they were using 12m centres and working down<br />
in the rows created other issues as well. It was hard to do but<br />
we actually got there in the end with a lot of trial and error, and<br />
that’s how the whole thing evolved.”<br />
The hydraulic system is highly specced, with a heavy duty 20:1<br />
hydraulic Sumitomo reduction gear box running the floor belt<br />
and four mine-specced braid hydraulic hoses used as flexible<br />
delivery lines.<br />
Each spinner shaft has its own hydraulic drive motors which<br />
can be run in series – at higher speed but reduced power for<br />
urea spreading – or parallel, with more power for spreading lime<br />
and gypsum.<br />
4<br />
62 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND
SPREADER REVIEWS<br />
Jaiden Drought headed to Waikato in 2016 to look at the sixtonne<br />
Sam Spreader for <strong>Farm</strong> Trader NZ, the product of more<br />
than 60 years of experience from Coombridge and Alexander<br />
1<br />
Sam’s the man<br />
Spreaders are constantly evolving. While some linkage<br />
machines spread more accurately than trailed fertiliser<br />
spreaders, their capacity is often a major downfall.<br />
This is where the trailing Sam Spreader eats up its opposition.<br />
The six-tonne fertiliser spreader we tested has a total capacity of<br />
4.6 cubic metres, and can handle six tonnes of superphosphate,<br />
7.7t of lime and 3.7t of urea.<br />
Built by the team at Coombridge and Alexander, the machine<br />
we tested is a 2015 six-tonne 400mm belt spreader with<br />
swivel coupling, 400/60-15.5 tyres (both standard on six-tonne<br />
machines).<br />
Optional extras include remote greasing, road lighting and roll<br />
top cover. Load cells or the optional fully hydraulic setup and an<br />
800mm-wide belt for organic material are other available options.<br />
It also boasts a plastic hopper, designed to last longer than its<br />
steel predecessor, while the chassis is firstly sandblasted, then<br />
thermal-arc spray galvanised, primed, followed by a final two-pot<br />
epoxy top-coat to help reduce corrosion.<br />
The Sam Spreader also offers the option of a fully hydraulic<br />
drive through a Whitehead Computer Controller with full GPS<br />
and section control capabilities, and load weigh scales for<br />
operators looking for greater measurement of application rates<br />
and product use.<br />
There is a fair bit of science behind their accuracy – the term<br />
which is used to measure spread patterns is the coefficient of<br />
variation (CV), a measure of the percentage of fertiliser outside<br />
a perfect spread – zero per cent being a perfect spread pattern.<br />
Sam spreaders have achieved a 7.1 per cent CV for urea and 8.1<br />
per cent CV for superphosphate – well within NZ standards.<br />
SET-UP AND SPREADING<br />
The machine simply runs two hoses from the tractor; red is<br />
pressure while yellow is return, allowing the 35L/min minimum<br />
oil flow to be delivered to the twin 600mm spreading discs to<br />
ensure they spin at the desired 850rpm. Operators can consult<br />
the spreader manual or a chart on the machine to set the<br />
desired spreading rate, though computer-controlled scales may<br />
be a worthy investment for those wishing to avoid this.<br />
The floor belt has an in/out clutch that activates when the<br />
spool for the hydraulic spinners is started and the live (red)<br />
hose is pressurised.<br />
To stop the hydraulic spinners and place the clutch out of gear,<br />
move the hydraulic lever to ‘pressurise’ the return (yellow) hose<br />
for one second then place the lever to neutral or float.<br />
The floor belt speed is ground-driven via the encased chain<br />
drive from the belt to the large drive sprocket, which is then<br />
held onto the smaller drive sprocket mounted on the pivot of<br />
the walking beam assembly. This means the application rate you<br />
have the back door set at will remain constant, regardless of<br />
contour or tractor speed.<br />
RATES, CENTRES AND ACCURACY<br />
Again, the door setting sticker and book chart show the<br />
spreading rate at certain centres. It is easier to spread at closer<br />
centres (the centre of the tracks up and down the paddock) as<br />
you can see where you have been and judge the distance more<br />
accurately (if not using GPS).<br />
Spreading at 15-metre centres for most fertiliser such<br />
as super and urea is more likely to be the perfect balance<br />
between accuracy and covering the ground; while 10-metre<br />
centres is better for fine products like lime or heavy application<br />
rates, which improves accuracy and places less stress on the<br />
spreading discs.<br />
The reason for this is you have to increase the rate proportional<br />
to the width you are spreading to get the desired application<br />
rate. The higher the rate, the more product hitting the discs at<br />
once, therefore the more strain they are under.<br />
Rates range from 45kg/hectare at 15m spreading centre s for<br />
nitrogen products all the way up to 3,000kg hectare at 10m<br />
spreading centres for materials such as lime.<br />
VERDICT<br />
The key for any investment in your business is to weigh up the<br />
options and decide what’s best for your situation. Yes, there are<br />
slightly more accurate machines on the market but would the<br />
extra four- to five-tonne capacity suit you more? If your answer<br />
is yes, Sam should be considered.<br />
2<br />
1. A rear spreader guard keeps the spinners<br />
out of harm’s way<br />
2. The 400mm belt test model is pictured,<br />
although an 800mm belt combo version is<br />
also available<br />
3. The main drive chain is oil immersed<br />
4. There is plenty of stainless and galvanised<br />
parts in the high corrosion areas<br />
Pluses<br />
Well recognised and established brand in New<br />
Zealand<br />
Very well built<br />
The mix of plastic, well coated steel and<br />
stainless steel to handle its corrosive work<br />
environment<br />
Requires only one hydraulic bank from the<br />
tractor<br />
Tows very well, is stable in the hills and is easy<br />
to get in and out of gateways<br />
Remote greasing means all nipples on the<br />
machine are lubricated – no excuse<br />
Oil bath for the main drive chain should ensure<br />
years of service<br />
Minuses<br />
The cover itself works well with the central<br />
support beam but I would personally prefer it<br />
side mounted, out of the dust, at the rear of the<br />
machine<br />
3<br />
4<br />
THE TRACTOR YOU WANT IS NOW EASIER TO FIND Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 63
64 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
3 YEARS<br />
3,000HRS WARRANTY*<br />
*Terms & Conditions Apply<br />
AL910C<br />
4 Tonne Machine SWL1500KG<br />
80HP, 4 speed trans, 3rd Valve,<br />
Quick hitch, Air con cabin, GP<br />
Bucket Pallet Forks & 4 in 1<br />
Bucket.<br />
AL916C<br />
5 Tonne Machine SWL2000KG 100HP, 4<br />
speed trans, 3rd Valve, Quick hitch, Air<br />
con cabin, GP Bucket Pallet Forks & 4 in<br />
1 Bucket.<br />
AL918F<br />
5 Tonne Machine SWL1800KG 45HP,<br />
2 speed Powershift Trans, Heavy Duty<br />
Quick hitch, Air con/Heated cabin, 3rd,<br />
Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, ROPS/FOPS Cabin, GP<br />
Bucket Pallet Forks & 4 in 1 Bucket.<br />
AL920F<br />
6 Tonne Machine SWL2200KG 70HP,<br />
2 speed Powershift Trans, Heavy Duty<br />
Quick hitch, Air con/Heated cabin, 3rd<br />
Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, ROPS/FOPS Cabin, GP<br />
Bucket Pallet Forks & 4 in 1 Bucket.<br />
$18,990 +GST<br />
$20,500 +GST<br />
$21,990 +GST<br />
$26,000 +GST<br />
AL922C<br />
7 Tonne Machine SWL2500KG 116HP, 4<br />
speed trans, 3rd Valve, Quick hitch, Air<br />
con cabin, GP Bucket Pallet Forks & 4 in<br />
1 Bucket.<br />
AL926F<br />
8 Tonne Machine SWL2800KG 100HP,<br />
2 speed Powershift Trans, Heavy Duty<br />
Quick hitch, Air con/Heated cabin, 3rd<br />
Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, ROPS/FOPS Cabin, GP<br />
Bucket Pallet Forks & 4 in 1 Bucket.<br />
AL930D<br />
10 Tonne Machine SWL3200KG 125HP<br />
4 speed trans, 3rd Valve, Quick hitch, Air<br />
con cabin, GP Bucket Pallet Forks & 4 in<br />
1 Bucket.<br />
AL936LE<br />
12.5 Tonne Machine SWL3400KG 130HP,<br />
2 speed Powershift Trans, Heavy Duty<br />
Quick hitch, Air con/Heated cabin, 3rd<br />
Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, ROPS/FOPS Cabin, GP<br />
Bucket Pallet Forks.<br />
$28,990 +GST<br />
$36,990 +GST<br />
$54,990 +GST<br />
$59,990 +GST<br />
AL938LE<br />
14 Tonne Machine SWL4000KG 150HP, 4<br />
speed Powershift Trans, Heavy Duty Quick<br />
hitch, Float Control, Air con/Heated cabin,<br />
3rd Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, ROPS/FOPS Cabin, GP<br />
Bucket Pallet Forks. Rippers not included.<br />
AL958E<br />
19.5 Tonne Machine SWL5400KG 225HP, 4<br />
speed Powershift Trans, Heavy Duty Quick<br />
hitch, Float Control, Air con/Heated cabin,<br />
3rd Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, Auto Grease system,<br />
ROPS/FOPS Cabin, GP Bucket Pallet Forks.<br />
Rippers not included.<br />
AL958G<br />
18.5 Tonne Machine SWL5200KG 225HP, 4<br />
speed ZF Powershift Trans, Fully pressurized<br />
cabin, Inboard Brakes, Ride Control, Float<br />
Control, Air con/Heated cabin, 3rd Valve,<br />
Lift/Tilt Kickout, Tinted Windows, Reversing<br />
Camera, Auto Grease system, Rock Bucket<br />
Hard Mounted.<br />
AL966E<br />
23 Tonne Machine SWL6200KG 250HP, 4<br />
speed ZF Powershift Trans, Heavy Duty Quick<br />
Hitch, Float Control, Air con/Heated cabin,<br />
3rd Valve, Lift/Tilt Kickout, Tinted Windows,<br />
Reversing Camera, Auto Grease system,<br />
ROPS/FOPS Cabin, GP Bucket Pallet Forks.<br />
$69,990 +GST<br />
$109,000 +GST<br />
$130,000 +GST<br />
$130,000 +GST
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 65<br />
When power and<br />
performance<br />
matters, choose<br />
Active <strong>Machinery</strong><br />
03 9799 7707<br />
sales@activemachinery.com.au<br />
activemachinery.com.au<br />
0409 307 500<br />
Three Meter/Ten Foot Stick Rake<br />
Suit Machines 8 Tonne to 14 Tonne<br />
$4,800 +GST<br />
Five Meter/Sixteen Foot Stick Rake<br />
(Bolt on Sides)<br />
Suit Machines 14 tonne to 23 Tonne<br />
$7,000 +GST<br />
High Dump Bucket<br />
Suits Machines 8 Tonne to 23 Tonne<br />
Hay Forks<br />
Suit Machines 5 Tonne to 23 Tonne<br />
4 in 1 Bucket<br />
Suit Machines 12 Tonne to 23 Tonne<br />
Light Materials Bucket<br />
Prices Vary depending on Cubic Meter.<br />
Suit Machines 8 Tonne to 23 Tonnes<br />
Options: (2.0m3) (4.0m3) (5.0m3)<br />
Starting at<br />
$4,500 +GST<br />
Starting at<br />
$2,500 +GST<br />
Starting at<br />
$4,800 +GST<br />
Starting at<br />
$3,500 +GST<br />
Rear Rippers<br />
Suits Machines 8 Tonne to 19 Tonne<br />
Sieve Bucket<br />
Suits Machines 6 Tonne to 14 Tonne<br />
Log Grapple (Single Finger)<br />
Suits Machines 8 Tonne to 23 Tonne<br />
Log Grapple (Twin Finger)<br />
Suits Machines 8 Tonne to 23 Tonne<br />
Starting at<br />
$6,500 +GST<br />
Starting at<br />
$3,200 +GST<br />
Starting at<br />
$5,200 +GST<br />
Starting at<br />
$5,200 +GST
66 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
Terraland TO 6000 Swifterdisc XE 12400<br />
• Super deep ripper! Rips down to 60cm (24 inches)<br />
• One pass operation to super deep rip, mix clay and<br />
incorporate lime that also packs the surface for an<br />
excellent seed bed.<br />
• The most economical way to transform poor to<br />
average sandplain into highly productive country in<br />
one pass!<br />
• Medium to heavy country is also responding with<br />
great results!<br />
• Special aggressive A-discs, produce the best<br />
stubble cutting and mixing action.<br />
• Excellent for incorporating lime and stubble at depth<br />
and levelling the paddock.<br />
• Kills weeds and leaves an impressive seedbed with<br />
the moisture locked in by the V-ring packer!<br />
• Fixes your seeding trash flow problems in one pass!<br />
TO AVOID DISAPPOINTMENT ORDER<br />
NOW TO SECURE DELIVERY<br />
Call Grant Borgward<br />
0428 816 701<br />
LINA TWIN DISC SEEDERS PRICES AS LOW AS $19,990–$37,900 +GST<br />
Agrolead Has The Best Drill For The Money!<br />
No One Else Even Comes Close!<br />
FFM-HH-5210450-TS-349<br />
2.5M<br />
5M<br />
3M<br />
6M<br />
6-35CBM FEED MIXERS FROM<br />
$29,990 +GST<br />
4M<br />
LINA TWIN DISC<br />
SEEDERS PRICES<br />
AS LOW AS<br />
$19,990–$38,990 +GST<br />
Speed Discs<br />
FROM $11,999 +GST<br />
MAXXIMUS FARM EQUIPMENT AUSTRALIA<br />
maxximusholdings@gmail.com | www.maxximusholdings.com.au<br />
CALL US TODAY!<br />
0413 762 085
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 67<br />
14 Joyce Ave, Moree NSW Ph: (02) 6752 2277 Michael Watt 0428 657 053<br />
40 Boundary Rd, Goondiwindi QLD Ph: (07) 4677 8100 Michael Watt 0428 657 053<br />
318 Taylor St, Wilsonton. Toowoomba QLD Ph: (07) 4634 3911<br />
www.blacktrucksales.com.au<br />
JOHN DEERE 8260R<br />
2013, 260HP, IVT Transmission, front 3pt<br />
linkage, Quick Hitch Rear, Front Suspension,<br />
Steer Ready (no receiver), 480/70 R34 front<br />
tyres, Dual 480/80 R50 Rears. Good Condition,<br />
located Dalby, call Michael 0428 100 164.<br />
706896. TA1038848.<br />
$165,000<br />
E Z TECH 30 TONNE<br />
Capacity -30 tonne<br />
Rollover tarp<br />
18 inch discharge auger<br />
14 ft long discharge auger<br />
1000 PTO, 30.5R32 Tyres<br />
LOCATED TOOWOOMBA. eztech30. TA988728.<br />
$79,900<br />
NEW HOLLAND CR9.90<br />
2016, 1207 Engine Hours - 961 Rotor Hours - 12.9L Iveco<br />
Engine - 530hp - 1300L Fuel Tank - 14500L Grain Tank -<br />
Folding Unload Auger with extension - 4 speed<br />
hydrostatic transmission - Intellisteer Guidance with<br />
Intelliview 4 screen and 372 receiver unlocked to RTK (no<br />
radio) - Straw Chopper - DFR - Reverse Camera and Tank<br />
Camera - 900/70R32 Front Tyres, 750/65R26 Rear Tyres<br />
80% - 40ft Mac Don Front - One owner, Excellent<br />
Condition. Located in Goondiwindi. Please call Dom<br />
0400582092. 706626. TA992274.<br />
$480,000<br />
HORSCH HORSCH JOKER 6HD SPEED TILLER<br />
(400 AC)<br />
Speed Tiller Demo unit - 6m width - Heavy Duty<br />
- up to 200mm working depth - Minimum<br />
220hp - 62cm Discs - Roll Pack Packer - Under<br />
3.5m Transport Width - Located in Goondiwindi.<br />
500335. TA993920.<br />
$95,000<br />
XCMG LW400K FEL COBRA and XUZHOU<br />
New XCMG 400K Loader<br />
Comes with bucket pallet forks.<br />
Located Moree NSW 2400.<br />
500117. TA999357.<br />
$120,000<br />
NEW HOLLAND CR9090 Freight Free<br />
NSW-VIC-SA<br />
2012, 1800 separator hours, 2010 45ft Macdon<br />
flex draper front. All in excellent condition.<br />
Located Moree S/N 706638. 706638. TA906104.<br />
$242,000 inc GST<br />
NEW HOLLAND CR9070<br />
2010 Model - 1800 Engine Hours - 1250 Rotor Hours -<br />
10.9L Iveco Engine - 1000L Fuel Tank - 12333L Grain<br />
Tank - Auger Extension - 4 speed hydrostatic<br />
transmission - Auto Steer ready with Intelliview monitor -<br />
Straw chopper - Automatic Stone Protection - Cameras -<br />
900/60R32 Front Tyres, 600/65R28 Front Tyres 60% - 42<br />
foot Honey Bee Front - Been through the workshop with a<br />
massive list of work been completed including shoe,<br />
sieves, chains, belts, service and much more. Located in<br />
Goondiwindi - Call 0746778100. 700078. TA870433.<br />
$230,000<br />
NORSEMAN 12 ROW 60 ft precision planter<br />
2016, Norseman 18mtr 12 row precision<br />
planter, water injection, CCS controller,<br />
diffusers and hydradrive.<br />
Location Goondiwindi. 500281. TA1019319.<br />
$141,000<br />
MORRIS 7130<br />
Morris 7130 Air Cart - Two Bin, 1691L & 2889L<br />
total 4580L - 3m rear axle - 6way metering<br />
system - Auger - Dickey John Controller<br />
- In excellent condition<br />
Located in Goondiwindi. 701116. TA955975.<br />
$20,000<br />
GLEANER R65<br />
2009, AGCO 8.4L Engine - 1839 Hours - 570L<br />
Fuel Tank - 10570L Grain Tank - 4 speed<br />
Hydrostatic Transmission - AGCO Global<br />
Technologies display and task manager - Straw<br />
Chopper, moister and yield meter - 30.5-32<br />
Front tyres 40%, 16.9-24 Rear tyres 25%.<br />
Located in Goondiwindi - Call Dom 0400 582<br />
092 or 4677 8100. R65HR62174. TA977701.<br />
$90,000<br />
CROPLANDS MAKO 400HC<br />
2016, Excellent condition Mako 400Hc packed<br />
with extras, comes with 3m extension kit, 27m<br />
boom tip extension, inline boom section filters,<br />
Trimble receiver, FMX display & Field IQ. Would<br />
suite new buyer. MK16400HC1035. TA938676.<br />
$165,000<br />
NEW HOLLAND T8.390<br />
2015, 335HP, Powershift transmission, Quick<br />
Hitch, PTO, Guidance Ready, Good Rubber at<br />
50%, 480/80R50 rear Tyres with duals,<br />
3697hrs. Located Goondiwindi 0746778100.<br />
706129.. TA1021516.<br />
$165,000<br />
CROPLANDS RG1300B<br />
Rogator RG1300B<br />
Approximately 3250hrs, 6 cylinder Twin Turbo<br />
340hp Engine, 5000L Tank, 36m Boom, 3 inch<br />
fill pump, Raven XT Height Control, Stainless<br />
Boom Line, 60L Chemical Hopper, Trimble<br />
XCN2050 Autopilot Steering system Unlocked to<br />
RTK with a 900mhz Trimble Radio. Located in<br />
Goondiwindi. Call *0400582092*. 7068881.<br />
TA1038844.<br />
$300,000<br />
NEW HOLLAND 840CD<br />
NEW 45 ft New Holland draper front.<br />
Suit all CR series Combines.<br />
500132. TA1021518.<br />
$80,000<br />
NEW HOLLAND CR9080<br />
2011, 42ft Honey Bee Front, 12.9L FPT Engine,<br />
523hp, Straw Chopper, Intelliview 4 screen,<br />
Guidance Ready, Twin Rotor, 4 speed<br />
hydrostatic Transmission, 1709 Rotor Hours,<br />
2479 Engine Hours. In Excellent Condition,<br />
Located in Goondiwindi. Call *0400582092*.<br />
706627. TA1021519.<br />
$265,000<br />
GASON 1830RT2 AIR SEEDERS/AIR CARTS<br />
2 Bin Auger Ground, drive4 outlets,<br />
Located Moree NSW. Call 02 6752 2277<br />
915062. TA1021520.<br />
$33,000<br />
You can depend on Black Truck & Ag for a good deal, a suitable finance package and service support.<br />
FFM-FP-5011765-B<br />
2.99% on all used combines, Terms & Conditions apply. Subject to credit approval. Finance provided by CNH Industrial Capital Australia Pty Ltd AFS License No.286664.
PRIVATE Advertising<br />
www.tradefarmmachinery.com.au/sell 1300 362 272<br />
GRIZZLY FIELD BOSS 108 PLATE<br />
2017, Heavy 12.2mm frame with<br />
heavy duty wheel package,<br />
28/8mm front & rear plates,<br />
currently at 26.5 front & 27 at rear.<br />
Great machine, 6339. QLD.<br />
DIY1037124. 0428 445 269. $160,000<br />
MASSEY FERGUSON 6255 2001,<br />
100HP, 4WD, 4 cylinder turbo.<br />
Burder loader, bucket and forks.<br />
8700hrs. Bendigo area. Ph.<br />
0354369237 or 0419986156.,<br />
U182631H. VIC. DIY1034762.<br />
0419 986 156. $31,900<br />
UNKNOWN INTERNATIONAL GRAIN<br />
CLEANER suitable for wheat, in<br />
good condition, Na. SA. DIY1035348.<br />
0403 124 911. $5,000<br />
FRAHN CAP - 10<br />
2019, Gravity table. (Capacity 10TPH on Cereals) is used<br />
for fine grading & impurity separation of grains & small<br />
seeds with identical particle size but different in their<br />
specific weight, CAP10201708033. VIC. DIY823049.<br />
0418 504 269. $46,090<br />
SELL YOUR FARM MACHINERY<br />
VISIT TRADEFARMMACHINERY.COM.AU/SELL OR CALL 1300 362 272<br />
MAKING YOUR LIFE A BREEZE<br />
smallaire.com.au<br />
Manufacturers of Air Movement Products since 1974<br />
Grain drying systems<br />
Grain Aeration Systems<br />
High Pressure Blowers<br />
Stirring/Wall & Roof Fans<br />
Airseeder components<br />
Commercial/Domestic AC systems<br />
Ph: (03) 5382 5688<br />
170 Golf Course Rd, Horsham VIC<br />
Ph: 0418 997 646 4/70 Strickland Street, South Perth WA<br />
<br />
FFM-SH-5032334-TS-361<br />
SECONDHAND<br />
MACHINES IN STOCK<br />
08 8821 1188<br />
FARM MACHINERY FOR ALL SEASONS<br />
CONTACT<br />
Kris McCracken 0418 824 054<br />
Phillip Rowntree 0428 859 027<br />
Gary Kotz 0427 868 191<br />
Colin Adams 0429 941 331<br />
CASE IH MAGNUM 315<br />
2012, 312HP 6cyl 8.7L<br />
Power Shift<br />
Transmission<br />
PTO 540/1000 rpm<br />
Trimble steering. 102633.<br />
TA1029793.<br />
$203,000 Inc GST<br />
FLEXI COIL 2340 AIR SEEDER<br />
CART<br />
Dual fan,<br />
triker, Flexicoil<br />
electronic controller,<br />
ground drive,<br />
variable rate<br />
102586. TA1024980.<br />
$48,400 Inc GST<br />
CASE IH MX220<br />
2001, w/- Rear Dual Wheels/Tyres<br />
Front - 480/70R30- 90%, Rear<br />
Dual-620/70R42 90% Inner 60% Outer<br />
Transmission Forward,<br />
Reverse Shuttler<br />
1000 PTO, 4 Hydraulic Remotes<br />
UHF Radio & Radio, Exterior Mirrors<br />
Front Weight Carrier, Tool Box.<br />
102636. TA1036528.<br />
$57,200<br />
GLEANER S98<br />
2017 Build<br />
579 Engine Hours,<br />
377 Sep Hours,<br />
9.8L Engine,<br />
471HP,<br />
Titan Terminal, tidy<br />
maintained<br />
machine. C71364. TA970992.<br />
$385,000 Inc GST<br />
AMAZONE ZA-M ULTRA<br />
Good Condition<br />
3 Point Linkage mounted<br />
4200L. 102635. TA1036530.<br />
$27,500<br />
NEW HOLLAND CR10.90<br />
Engine Hours 1600<br />
Separator Hours 1170<br />
6 cylinders 653 hp<br />
14,500 Grain Tank<br />
Rotor Vane update<br />
Centre Point Steering<br />
Includes Macdon FD75 45' front.<br />
611961002. TA1015611.<br />
$506,000 Inc GST<br />
JOHN BERENDS 16<br />
PLATE OFFSET<br />
DISCS<br />
16 Plate offset discs<br />
3PL. 102634. TA1036531.<br />
$1,650<br />
MILLER NITRO 5333<br />
2012, Boomspray, 6,100LT<br />
Tank, 2,719.8 Hours, Cummins<br />
QSC 8.3Lt Tier 3, 305Hp,<br />
520/85R38 Tyres (60%), Scud<br />
pump, Granni Mix. 102470.<br />
21.14049. TA784678.<br />
$253,000<br />
HARDI 7036I COMMANDER<br />
7000 Litre tank, 9<br />
section,<br />
HC6500 controller,<br />
Norac Auto Height,<br />
Granny Pot, Triple<br />
Nozzle Bodies,<br />
36m Force Boom. Stk#102531.<br />
TA1015779.<br />
$49,500 Inc GST<br />
USED HEADERS:<br />
Case 8230 & Macdon 2152 Rigid Draper 40’ Front.....................$363,000<br />
John Deere S660 & John Deere 635D Front ...............................$275,000<br />
Claas Lexion 780TT .....................................................................$429,000<br />
2013 New Holland CR9090 Combine ..........................................$357,000<br />
Claas Lexion 780TT & Macdon D65 40’ Draper Front ................$495,000<br />
2010 Claas 580R Combine ..........................................................$132,000<br />
2013 New Holland CR9090 .........................................................$302,500<br />
Claas Lexion 750 .........................................................................$264,000<br />
USED SEEDING:<br />
K-Hart Disc Seeder ........................................................................$37,444<br />
USED BOOMSPRAYS:<br />
2012 Miller Nitro 5355 ................................................................$253,000<br />
2014 Miller Nitro 5333 ................................................................$220,000<br />
Hardi 7036i Commander ...............................................................$49,500<br />
USED FRONTS:<br />
John Deere 615 Pick Up Front .......................................................$35,200<br />
Claas 450 Swath Up Front .............................................................$39,600<br />
New Holland 880CF 880CF-40 ......................................................$66,000<br />
Agco 800 Series flex front .............................................................$11,000<br />
Macdon adaptor to suit Gleaner .......................................................$4,620<br />
ON BEHALF OF CLIENT:<br />
John Shearer 4150 Universal bar..................$POA<br />
Truck dog tipper tralier..................$POA<br />
PRICES ARE INC GST CONDITIONS APPLY<br />
Website: www.gjeast.com.au | Email: sales@gjeast.com.au | 4-8 Goldsworthy Street - Kadina<br />
FFM-HH-5012311-C
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 69<br />
DYNO<br />
TESTED<br />
ALL DIESELS<br />
DYNO<br />
TESTED<br />
ALLIS CHALMERS<br />
3500A New 150hp $8,800<br />
CASE<br />
A504BD 500 hrs 125hp $9,350<br />
CUMMINS<br />
NTC 300 Big Cam $12,100<br />
NTC 400 Rebuild $20,350<br />
NTC 350 Ex Fire Truck $13,750<br />
NTC 400 Ex Fire Truck $15,950<br />
NTC 444 $14,500<br />
NTC400 Small Cam $9,350<br />
N14 Various from $11,000<br />
N14 Mechanical $13,750<br />
N14 525HP Celect Plus Rebuilt $25,850<br />
N14 Celect Ex Fire Truck $13,750<br />
N14 Celect Plus Low Miles $16,500<br />
NH250 Ex Us Army as New $9,350<br />
L10 330hp Rebuilt<br />
$CALL<br />
M11 Low miles from $11,000<br />
M11 Mechanical Industrial $CALL<br />
ISM 11 Low Km from $12,100<br />
ISM 420hp Low kms $14,850<br />
6CT 210hp 800hrs $14,300<br />
6CTA 250hp $9,350<br />
6CTAA 275hp - Low Kms $9,350<br />
6CTAA 300hp $13,750<br />
6CTAA 300 Rebuilt<br />
$CALL<br />
6BT 160hp $8,800<br />
6BT New 160hp $15,950<br />
6BTA 180 hp $9,350<br />
6BTAA 235hp Low kms $10,450<br />
ISB 5.9 Industrial $9,350<br />
ISB 5.9 24 Valve VP44 $8,250<br />
QSC 260hp 2700hrs $15,950<br />
ISC Low Klms from $14,850<br />
ISC Rebuilt<br />
$CALL<br />
ISL Good Tested From $15,950<br />
ISL 400hp Rebuilt<br />
$CALL<br />
ISX 500hp Rebuilt $27,500<br />
QSM11 Rebuilt<br />
$CALL<br />
QSM11 Very Low Hours $CALL<br />
NEW CUMMINS 4BT AND 6BT<br />
CYLINDER HEADS<br />
CATERPILLAR<br />
C12 Good Runners from $14,850<br />
C12 Low Km $17,050<br />
C12 Industrial $15,950<br />
C12 Rebuilt<br />
$CALL<br />
3176 with jakes $CALL<br />
3116 Industrial & Auto $CALL<br />
3126 330hp $11,000<br />
3204 $8,800<br />
3208 From $9,350<br />
3208 Rebuilt $CALL<br />
3208T Ex Government $11,000<br />
3208 Turbo Rebuilt $CALL<br />
3306PC Industrial Running $5,000<br />
3306DI 300hp truck spec $13,125<br />
3406B Strong motors $14,850<br />
3406B Powerpack<br />
$CALL<br />
3406B After cooled $14,850<br />
3406C Industrial spec $15,950<br />
3406C Truck spec $15,950<br />
3406E Dyno from $14,500<br />
C15 Dyno Tested $20,350<br />
C15 Rebuilt<br />
$CALL<br />
3044 New - Last one $10,450<br />
3066 New - Last one $18,700<br />
3516 Genset 200hrs 1600kva $275,000<br />
DAF<br />
PACCAR 4 CYL $8,250<br />
PACCAR 6 CYL from $8,500<br />
PACCAR 6.7 CYL NEW $18,150<br />
430hp Mechanical $13,750<br />
280hp Electronic $16,500<br />
430hp Electronic Ex 85CF $17,600<br />
430hp Electroinic Ex 95 XF $17,600<br />
480hp Electronic $17,600<br />
530hp Electronic $19,80<br />
DETROIT<br />
2.53 Suit Collector $2,750<br />
6V53 Dyno Run As New $9,350<br />
4.71 Low Hrs $7,700<br />
4.71 Turbo Low Hrs $7,150<br />
6.71 Inline $7,050<br />
6V71 Truck and industrial $CALL<br />
8V71 Low Miles $9,350<br />
6V92TA from $10,450<br />
6V92TA In-chassis Rebuild $15,950<br />
8V92 DDEC 2 Ex F/Truck $13,750<br />
8V92TA Industrial As New $18,500<br />
8V92TA Silver Near New $13,750<br />
8V92TA Electronic Low Miles $13,750<br />
12v92TTA $13,750<br />
Series 60 DDEC 2<br />
$CALL<br />
Series 60 12.7 500hp $13,750<br />
DD15 $19,250<br />
DEUTZ<br />
F3L912 $6,600<br />
F4L914 Suit Rebuild $3,300<br />
F5L912 Suit Rebuild $3,300<br />
INTERNATIONAL<br />
DT466 from $8,250<br />
DT466 Ex Firetruck $9,350<br />
530E Electronic low kms $10,500<br />
IVECO<br />
8060 core motor $5,000<br />
9 Speed Transmission As New $3,850<br />
Tector Various from $11,000<br />
Tector 6 Rebuilt $18,150<br />
Cursor 8 $13,750<br />
Cursor 10 $15,400<br />
Cursor 13 $18,150<br />
JOHN DEERE<br />
4239D 80hp Low Hrs $6,050<br />
4045TF $3,000<br />
LISTER<br />
ST3 Air Cooled 20hp $3,300<br />
LPW4 Water Cooled 40hp $3,850<br />
MACK<br />
E6-350 Two Valve $10,450<br />
E7-350 Mechanical $14,950<br />
E7-427 V- $16,000<br />
E7-454 V-Mac $16,225<br />
E7 4 Valve V-Mac $16,225<br />
E7 480 EGR<br />
$CALL<br />
M.A.N.<br />
DO824 Low Km $7,150<br />
DO826 Low Klm $9,350<br />
DO836 Electronic from $9,900<br />
DO836 Common Rail $16,500<br />
D2866 $13,750<br />
D2876 $13,750<br />
D2676 Common Rail $22,000<br />
MERCEDES<br />
OM364A $6,050<br />
OM407 Bus Specs $3,850<br />
OM422 V* 250hp $9,350<br />
OM447 Bus $11,000<br />
OM447 Turbo $13,750<br />
PM904LA Bus<br />
$CALL<br />
OM906LA From $11,000<br />
OM926LA From $13,750<br />
OM457 Bus $17,050<br />
OM460 Freightliner from $13,750<br />
ATEGO V6 Low Km from $11,000<br />
ONAN<br />
Onan 9hp Rebuilt $2,750<br />
NEW, REBUILT AND USED MOTORS<br />
HUNDREDS OF ENGINES WRECKED FOR SPARES<br />
CATERPILLAR 3516 GENERATOR. 1600kva - 200hrs. $275,000<br />
PERKINS<br />
6.354 Naturally Aspirated $6,600<br />
4.108 Rebuilt $5,500<br />
4 Cyl Varioius $CALL<br />
4.236 Suit Rebuild $1,100<br />
804 Brand New $10,450<br />
SCANIA<br />
DSC/DS9 Various<br />
$CALL<br />
DC9 5cyl Low Kms $19,800<br />
DS11 360 & 380hp $13,750<br />
DSC12 420hp Electronic Low Ks $CALL<br />
DT12 470hp & 480 EGR $CALL<br />
DS14 4 Series<br />
$CALL<br />
DS16.0 580hp Low Klms $22,000<br />
VOLVO<br />
TD61F $8,500<br />
TD63 $9,350<br />
D6A Low Km $9,350<br />
D6B $10,450<br />
TD71 Low Km $9,350<br />
TD73 Low Km $9,350<br />
D7A Mechanical $9,350<br />
D7B Mechanical $9,900<br />
D7 Electric Gov. Low Km $13750<br />
D7C ex Low Km FM7 $13,750<br />
D7E Tested Units From $12,250<br />
FH12 D12A<br />
$CALL<br />
D12D 420hp Low km $18,700<br />
D12D 460hp $19,800<br />
D12D 500h<br />
$CALL<br />
FM9 D9A $16,500<br />
D9B Low K $18,700<br />
D11-460 $19,250<br />
D13A Low Km<br />
$CALL<br />
DIFF SPECIALS<br />
Scania Rear 3,89:1 $2,200<br />
Eato $575<br />
MAN Various from $825<br />
Mercedes Various models from $825<br />
WINCHES<br />
Various 5,000lb to 65,000lb<br />
hydraulic winches available<br />
TRANSFERCASES<br />
Kaiser $3,850<br />
Rockwell From $2,500<br />
M.A.N. from $1,650<br />
Oshkosh<br />
$CALL<br />
FRONT STEER DRIVE AXLES<br />
Hub Reduction or Hypoid<br />
Various sizes, ratio $1,250<br />
AUTOMATICS<br />
World MD 3060/3560 $4,400<br />
World MD 3060PR/3560 PR PTO with<br />
retarder New $8,250<br />
World HD 4560P PTO Spec $11,000<br />
2000Series $4,400<br />
B400 Bus Spec $6,000<br />
B400R Retarder Spec $7,150<br />
B500R Retarder Spec $11,000<br />
AT545 Low Klms $2,200<br />
MT643 Low kms $3,300<br />
MT653 Low kms $3,300<br />
MTB653 with Retarders $6,050<br />
MT654 As New $6,050<br />
HT740 Ex US Army $8,250<br />
HT754 low Hours $9,350<br />
HT754 With Retarder $11,000<br />
HT750 DRD low Km $9,750<br />
ZF 4 sp Autos<br />
$CALL<br />
Various adaptors available<br />
GEARBOX<br />
Roadranger RTO16709 $2,950<br />
Roadranger RTO12513 $2,750<br />
Leyland 5 Speed $1,375<br />
ZF S680 + GV80 $3,575<br />
ZF S680 $2,850<br />
ZF S690 GV90 $3,850<br />
ZR S690 $3,300<br />
Kaiser 5 Speed $1,500<br />
IVECO Various<br />
$CALL<br />
Scania GRS900R $7,700<br />
Scania GRS900 $7,150<br />
HYDRAULIC UNIT<br />
Cat 3126 290hp $22,000<br />
4 x 4 SPECIAL<br />
Complete 4 x 4 set of axle assemblies,<br />
transfer case, tail shfts etc.. ex<br />
Atego Fire Truck. Very low mileage<br />
conditio<br />
$CALL<br />
BLADDER TANKS<br />
New 3,000 Gal Trailable. complete<br />
with tiedowns. Suit potable water,<br />
molases et $5,500<br />
New 5000 Gal Trailerable $5,500<br />
POWERPACKS<br />
Cummins ISB 260hp<br />
$CALL<br />
3406B Aftercooled<br />
$CALL<br />
Caterpillar 3126 290hp $22,000<br />
Cummins 6BT 160hp $11,000<br />
GM 3.53 with clutch low hrs $3,000<br />
John Deere 4045 Runs, needs work $3,000<br />
John Deere 4045<br />
John Deere 3059<br />
$CALL<br />
$CALL<br />
LARGE RANGE OF<br />
POWERPACKS<br />
ENGINES CUSTOM<br />
BUILT TO SPEC.<br />
CALL FOR PRICING.<br />
SPECIALISING IN AMERICAN AND EUROPEAN DIESELS<br />
GST<br />
Included<br />
NEW CATERPILLAR 3044CT - LAST ONE $10,450<br />
Ph: (07) 5597 0077 Fax: (07) 5597 0011<br />
18 Jade Drive, Molendinar, Gold Coast. 4214<br />
www.alldiesels.com<br />
Info@alldiesels.com<br />
FFM-FP-5013171-CS-380
70 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
VELDONAS<br />
Specialising in industrial motors and pumps<br />
WE BUILD DIESEL HYDRAULIC PUMP SETS TO ORDER<br />
ASK ABOUT OUR OIL AND TEMPERATURE AND TIMER WATCHDOGS<br />
ROVATTI CHOPPER<br />
Open pump impeller, chopper device, stainless steel plates, heavy duty jockey jacks,<br />
hand primer on effluent pumps, pto shaft, heavy duty frame.<br />
STVEL54441. TA10770.<br />
$6,599<br />
TRUCK MOUNTED 12" TRANSFER PUMP SET TRANSFER PUMP<br />
Truck mounted 12" Transfer pump set.<br />
Ask about other specialised applications.<br />
S13. TA11062.<br />
POA<br />
AIR CLEANERS<br />
HEAVY DUTY<br />
From 10hp to to<br />
200 hp.<br />
VEL 14307. TA10926.<br />
Prices starting from<br />
$130<br />
TACHOMETERS FOR DIESEL ENGINES<br />
Tiny tach for diesel engines gives a digital RPM reading<br />
regardless of the number of cylinders. A transducer takes a<br />
pulse reading from the injector line Simply bolt the<br />
transducer to the injector line, supply a 12-24V DC supply<br />
and away you go! It even has a built-in hour meter, service<br />
function and max rpm range. S22. DPLIn27532.<br />
$264<br />
INDUSTRIAL<br />
RADIATORS<br />
20 hp $275<br />
40 hp $360<br />
60 hp $585<br />
120 hp $820<br />
S11. DPLIn27501.<br />
From $275<br />
JAPANESE DIESELS<br />
Parts available for small<br />
Japanese diesels.<br />
AW54939-FM077-060-07.<br />
DPLIn27496.<br />
POA<br />
BLADES<br />
To fit small Japanese<br />
tractors.<br />
From $8.80 each inc GST.<br />
AW54939-FM077-060-08.<br />
DPLIn27497.<br />
$9<br />
PERKINS GENERATORS<br />
6,8,10,13,15,20 and 30 KVA<br />
generators, single and 3-phase,<br />
powered by water-cooled<br />
Perkins heavy duty diesel<br />
engines, key or remote start,<br />
fuel tank base, full engine<br />
protection, 500 hours service<br />
intervals Ideal backup or prime<br />
power Call for your special<br />
price!!!. AW54939-ST190912.<br />
DPLIn27583.<br />
POA<br />
ENGINE WATCHDOG TM6<br />
ENGINE SHUTDOWN SYSTEM<br />
& TIMER<br />
TM6 Oil/Temp Watchdog with<br />
wiring diagram $240 + GST<br />
TMT Oil/Temp Watchdog with<br />
shutdown timer & wiring<br />
diagram $460 + GST<br />
Solenoids and rack pullers are<br />
extra. S37. TA750757.<br />
$240 + GST / $460 + GST<br />
PLUTTO PUMP PRIMER<br />
Turn your centrifugal<br />
pump into a self-priming<br />
pump With the new easy<br />
to install Plutto exhaust<br />
primer throw away your<br />
bucket and hand priming<br />
pump The Plutto exhaust<br />
primer automatically<br />
primes up your pump<br />
when you sart the engine<br />
Priming kit. S18. DPLIn27578.<br />
$490<br />
SECOND HAND<br />
YANMAR DIESEL 6 X SELF<br />
PRIMING PUMP<br />
With 25 hp Yanmar diesel.<br />
S12. DPLIn27519.<br />
$6,310 + GST<br />
IRRIGATION HOSE HOSE<br />
Suction and delivery hose<br />
Call for your special price!.<br />
AW54939-FM077-043-01.<br />
DPLIn27516.<br />
POA<br />
ISUZU • MITSUBISHI • KUBOTA • YANMAR<br />
Agent for TUTTS • TATHONG • KUBOTA • ENGINES • GODWIN PUMPS<br />
www.veldonas.com
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 71<br />
www.veldonas.com<br />
Specialising in industrial motors and pumps<br />
BUILT TO YOUR REQUIREMENTS<br />
PUMP SETS BUILT TO YOUR REQUIREMENTS NEW OR USED<br />
ALS0 IN STOCK<br />
LOW PRESSURE PUMPS<br />
*New 4” self-priming pump with S/H Kubota 12 hp diesel,<br />
100,000 lt/hr to 15mt head ................................. $4,890 inc GST<br />
*65 bpz bare shaft, 55 mt head ...............................................$380<br />
*80 bpz bare shaft, 65 mt head ...............................................$560<br />
BUDGET DIESEL ENGINES<br />
All engines are low hours, fan-flywheel, 3 months limited warranty<br />
*Kubota Z600, 12hp, 2 cylinder ............................................$1,710<br />
*Kubota D600, 15hp, 3 cylinder ...........................................$1,683<br />
*Kubota D850, 18hp, 3 cylinder ...........................................$2,040<br />
*Kubota D950, 20hp, 3 cylinder ...........................................$2,233<br />
*Kubota V1200, 28hp, 4 cylinder ..........................................$2,562<br />
*Kubota V1405, 30hp, 4 cylinder ..........................................$2,750<br />
*Isuzu 3AF1, 22hp, 3 cylinder ..............................................$2,057<br />
*Isuzu 3AE1, 30hp, 3 cylinder ..............................................$2,376<br />
*Isuzu 3AD1, 34hp, 3 cylinder ..............................................$2,557<br />
*Yanmar 2HS66, 11hp, 2 cylinder ........................................$1,155<br />
*Yanmar 2HS80, 19hp, 2 cylinder ........................................$1,765<br />
*Yanmar 3TNA86, 15hp, 3 cylinder ......................................$1,770<br />
*Yanmar 3TNA68, 16hp, 3 cylinder ......................................$1,870<br />
*Yanmar 3TNA72, 20hp, 3 cylinder ......................................$2,035<br />
*Yanmar 3TNA75, 23hp, 3 cylinder ......................................$2,075<br />
*Yanmar 3TNA82, 25hp, 3 cylinder ......................................$2,629<br />
*Mitsubishi CA700, 15hp ......................................................$2,075<br />
*Mitsubishi K3D, 21hp, 3 cylinder ........................................$1,980<br />
WE ALSO BUILD POWER PACKS INCLUDING RADIATOR,<br />
MUFFLER, STUB SHAFT, IGNITION, FILTERS, BASE FRAMES.<br />
GENSETS<br />
ASK ABOUT OUR NEW FG WILSON GENSETS FROM 10 KVA<br />
to 400KVA<br />
ENGINES<br />
*Large range of new and secondhanddiesel<br />
engines, 8hp to 100hp, 3 months warranty .......From $1,500 inc GST<br />
TRANSPORT ARRANGED AUSTRALIA WIDE<br />
IRRIGATION FITTINGS AND HOSES<br />
TO SUIT YOUR PUMPING<br />
REQUIREMENTS<br />
DIESEL POWER PACKS SELF-PRIMING PUMPS SOUTHERN CROSS PUMPS GENERATORS<br />
• BENDS<br />
• TAPERS<br />
• TEES<br />
• FOOT VALVES<br />
• CHECK VALVES<br />
Ask for a quote<br />
SECOND HAND<br />
KUBOTA Z600<br />
2 cylinder diesel<br />
power pack<br />
Electric start.<br />
PM045-072-02.<br />
DPLIn27529.<br />
$1,925<br />
SELF PRIMING 4 PUMP<br />
4 self priming, belt drive.<br />
AW54939-FM077-043-02.<br />
DPLIn27541.<br />
$654<br />
SOUTHERN<br />
CROSS 4X3<br />
With S/H Kubota<br />
Z620, 13 hp 2<br />
cylinder diesel, 20<br />
litre/second at 20<br />
metre head<br />
Economical<br />
transfer pump<br />
$4,970 inc GST.<br />
Kubota. DPLIn27528.<br />
$4,970<br />
PTO<br />
GENERATOR<br />
50KVA - Three<br />
Phase - 3 point<br />
linkage with heavy<br />
duty jack stands.<br />
VEL4156. TA10931.<br />
$8,710<br />
SECOND HAND<br />
ISUZU POWER<br />
PACKS<br />
3 cylinder diesel,<br />
22-40 hp.<br />
From $3,080.<br />
ST159827.<br />
DPLIn27579.<br />
$3,080<br />
ISUZU DIESEL 6 X SELF<br />
PRIMING PUMP<br />
with secondhand 25 hp.<br />
AW54939-FM077-051-09.<br />
DPLIn27515.<br />
$6,310 + GST<br />
SECOND HAND<br />
SOUTHERN CROSS<br />
80X50-315<br />
Isuzu 3AE1, 30 hp diesel,<br />
15 litres per second at 80<br />
metre head.<br />
AW54939-FM077-112-02.<br />
DPLIn27518.<br />
$7,850 + GST<br />
MITSUBISHI<br />
DIESEL<br />
GENERATOR SET<br />
8 KVA<br />
15 hp, S/H 3<br />
cylinder<br />
Mitsubishi electric<br />
start Engine<br />
watchdog, fuel<br />
tank. S16.<br />
DPLIn27548.<br />
$5,850 + GST<br />
SECOND HAND<br />
NISSAN QD32<br />
Diesel, 64 hp, 4<br />
cylinder, all new<br />
fittings, includes<br />
outrigger bearing<br />
A real workhorse.<br />
S21. DPLIn27523.<br />
$5,780 + GST<br />
UP TO 36"<br />
MINING PUMPS<br />
PUMP<br />
VXTE48791.<br />
TA206423.<br />
$14,510<br />
SECOND HAND<br />
SOUTHERN<br />
CROSS<br />
80X50X250<br />
Nissan TD27,<br />
48hp diesel, 20<br />
litres per second<br />
at 80 metre head<br />
Engine shutdown<br />
included. S23.<br />
DPLIn27505.<br />
$8,270<br />
12" 300 IS<br />
TRAILER<br />
MOUNTED PUMP<br />
SET<br />
new pump direct<br />
drive coupled to<br />
second hand 6cyl<br />
Nissan diesel with<br />
new tandem trailer<br />
with Vin. S33.<br />
TA750753.<br />
$18,810 + GST<br />
KUBOTA V1200<br />
With 28 hp, 4<br />
cylinder diesel<br />
power pack New<br />
radiator, muffler,<br />
hoses, filters,<br />
35mm keyed<br />
shaft.<br />
PM045-072-03.<br />
DPLIn27547.<br />
$3,985<br />
SECOND HAND<br />
ISEKI 10" PUMP<br />
New. 3 cylinder,<br />
40 hp Isuzu diesel.<br />
27480. DPLIn27480.<br />
$7,990 + GST<br />
VARIOUS<br />
ELECTRIC<br />
PUMPS SINGLE +<br />
3 PHASE<br />
elecpu9582.<br />
TA206433.<br />
$4,260 4260<br />
CUMMINS 66<br />
KVA<br />
6 cylinder diesel<br />
generator. S19.<br />
DPLIn27568.<br />
$13,387<br />
SECOND HAND<br />
KUBOTA<br />
SOUTHERN<br />
CROSS HELICAL<br />
PUMP<br />
Kubota - Southern<br />
Cross Helical<br />
Rotor pump.<br />
From $4,950.<br />
Vel SSS420.<br />
TA226460.<br />
$5,850 + GST<br />
PONTOON PUMP<br />
ELECTRIC<br />
Pontoon with<br />
electric pump.<br />
xzdef19652.<br />
TA206427.<br />
$14,910<br />
SOUTHERN<br />
CROSS<br />
100X65-315<br />
PUMP SET<br />
with Nissan QD32<br />
(65hp), skid fuel<br />
tank, oil-temp,<br />
hi/lo timer<br />
watchdog and<br />
fork lift roof.<br />
Vel67912. TA11060.<br />
$13,750<br />
PISTON PUMP<br />
XF404<br />
With DEK 4.7 hp<br />
diesel, 4,000 litres<br />
per hour 60 metre<br />
head. S24.<br />
DPLIn27531.<br />
$3,300<br />
9 Wright Street, Sunshine Victoria 3020 | sales@veldonas.com.au<br />
Phone 03 9312 0888 • Fax 03 9312 0999 • Mob 0417 709 200<br />
FFM-DPS-5011411-E
72 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
netractors.com.au<br />
$22,600<br />
STK: 10646<br />
$28,900<br />
STK: 10570<br />
$33,900<br />
STK: 10658<br />
2019 CASE IH FARMALL 25B 2019 CASE IH FARMALL 35B<br />
2019 CASE IH FARMALL 50B<br />
– 1.3L, 3-Cylinder Diesel, 27HP Engine<br />
– 2-Range Hydrostatic Transmission<br />
– 3-Point Linkage, 650kg Capacity<br />
– 1-Rear Hydraulic Remote<br />
– 4WD, ROPS, 540 PTO, Loader Ready<br />
– 1.76L, 4-Cylinder Diesel, 38HP/28KW Engine<br />
– Mechanical Transmission, 33L Fuel Tank<br />
– Lift Capacity: 375kg, Rear Lift Capacity: 820kg<br />
– Weight: Mech 1385kg / Hydro 1403kg<br />
– INCLUDES: Front End Loader - PLc10, Max Lift: 2.45m<br />
– 2.5L, 4-Cylinder Diesel, 50HP Engine<br />
– 16x16 Manual Transmission, 4WD, ROPS<br />
– 540 PTO, 3-Point Linkage, 1252kg Capacity<br />
– 1-Rear Hydraulic Remote<br />
– Attachments Include: 4in1 Front End Loader.<br />
$29,900<br />
STK: 10657<br />
$46,900<br />
STK: 10666<br />
$46,000<br />
STK: 10475<br />
2019 CASE IH FARMALL 60B<br />
– 2.5L, 4-Cylinder Turbo Diesel, 60HP Engine<br />
– 4WD 16x16 Transmission<br />
– 540/750/1000 PTO<br />
– 3-Point Linkage, 1850kg Lift Capacity<br />
– Loader Ready<br />
2019 CASE IH FARMALL 60B W/CAB<br />
– 2.5L, 4-Cylinder Turbo Diesel, 60HP Engine<br />
– 4WD, 16x16 Transmission, Air Conditioned Cab<br />
– 540/750/1000 PTO, 3-Point Linkage<br />
– INCLUDES: Cab with Front End Loader - 4in1 Bucket<br />
– *BONUS: Pallet Forks*<br />
2018 CASE IH FARMALL 75C<br />
– FPT 3.2L, 4-Cylinder Turbo Diesel, 75HP Engine<br />
– 12×12 Power Shuttle<br />
– 4WD, ROPS, 540 PTO<br />
– 3-Point Linkage, 1886kg Capacity<br />
– 2-Rear Hydraulic Remotes, Loader Ready<br />
* Finance offer based on finance through St George Finance on Chattel Mortgage Finance at 6.0% comparison rate over 60 months with nil balloon.(T.A.P.)Conditions, fees & charges apply.<br />
$65,990<br />
STK: 10685<br />
$79,990<br />
STK: 10684<br />
$89,990<br />
STK: 10656<br />
2019 CASE IH FARMALL JX100<br />
– Tier-3, 4-Cylinder 3.9L, 100HP Turbo Diesel Engine<br />
– 12×12 Transmission, 540/1000 RPM PTO<br />
– 3-Point Linkage, 2-Rear Hydraulic Remotes<br />
– Is Loader Ready, Ready For Row Crop Type Work<br />
– 11.2R28 Front Wheels, 14.9R38 Rear Wheels<br />
2019 CASE IH FARMALL 95C<br />
– FPT 3.4L, 4-Cylinder, Turbo Diesel 95HP Engine<br />
– 24×24 Power Shuttle Transmission<br />
– Two Rear Hydraulic Remotes, Mid Mount Remotes<br />
– 3-Point Linkage, A/C, Stereo, Deluxe Fabric Seat<br />
– Flat Floor, Fold Up Passenger Seat<br />
2019 CASE IH FARMALL 105U<br />
– FPT 3.4L 4 Cylinder Turbocharged Diesel Engine, 107HP<br />
– 6x16 Semi Powershift Transmission with Power Shuttle<br />
– 2-Rear HYD Remotes, Mid Mount Remotes, 3-Pt Linkage<br />
– Deluxe Fabric Seat, Flat Floor, Passenger Seat, A/C<br />
– 2-Years / 2000 Hours REDCover Warranty<br />
08 8280 4095<br />
Onsite affordable finance and rent to own options available for approved applicants.<br />
1222-1238 Port Wakefield Road, Burton SA 5110<br />
Call Tony Romeo Direct<br />
Ph: 0439 615 713<br />
**Delivery Available**
WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA<br />
Wrights Tractor Sales & Service & Wrecking<br />
Chalkhill Road, McLaren Vale S.A. 5171<br />
STOCKIST & DISTRIBUTOR FOR SA.<br />
Sales (08) 8323 8795 Wrecking (08) 8323 8745 Office (08) 8323 8705<br />
Fax: (08) 8323 9165, Mobile: 0419 820 318<br />
Email: wrightstractors@bigpond.com<br />
IN BUSINESS FOR MORE<br />
THAN 35 YEARS SELLING<br />
AUSTRALIA WIDE<br />
www.wrightstractors.com.au<br />
FOR FULL LISTING OF TRACTORS & MACHINERY, NEW PARTS & ACCESSORIES<br />
MASSEY FERGUSON GC1705 TRACTOR WITH FRONT END LOADER 4 wheel drive,<br />
Front End Loader, approximately 150 hours as indicated, 4.1 bucket, underbelly<br />
mower, 18 horsepower approximately. * PRICE INCLUDES GST. 6750. TA1032570.<br />
$21,850 INCL GST<br />
CONNOR SHEA SEEDERS (SEVERAL OF)<br />
CONNOR SHEA 10 ROW DISC SUPER SEEDER, 3 POINT LINKAGE, SUPER & SEED<br />
BOX, RUBBER TYRES $7,200<br />
CONNOR SHEA 14 ROW DISC SUPER SEEDER TRAILING $10,500<br />
CONNOR SHEA 14 ROW DISC SUPER SEEDER LINKAGE $8,950. S2025. TA1029395.<br />
POA<br />
IMANTS ROTOK.R6.MD.R17 ROTOKNIFE Lawn aerator<br />
*price includes gst. 6630. TA964931. $9,850 INCL GST<br />
CHRIS GROW 7 TWIN GEARBOX SLASHER 3pl, pivoting centre, rear rollers,<br />
removable double side exit. * PRICE INCLUDES GST. John - 08 8323 8795 \ Richard<br />
- 0419 820318, wrightstractors@bigpond.com. S1816. TA949192.<br />
$11,900 INCL GST<br />
JOHN DEERE 855 TRACTOR 4 X 4 FITTED WITH 60" HYDRO CUT JOHN DEERE<br />
SLASHING DECK roll frame, 3 point linkage, 4 wheel drive, 3 cylinder diesel, PTO<br />
hydraulics, roll frame, 24 horsepower approximately, original condition, *price<br />
includes gst. 6623. TA964775.<br />
$11,400 INCL GST<br />
ALSO DITCH WITCH 8020<br />
CHAIN TRENCHER, 4CYL DIESEL,<br />
BACK FILL BLADE, AUX HYDS,<br />
OPEN CAB, ROPS $34,500<br />
DITCH WITCH 4010DD WHEELED TRENCHER 3 cylinder diesel, serial no: 6B2114,<br />
approximately 3,853 hours indicated, fitted with Deutz air cool diesel, 4 speed<br />
transmission, push blade, Model A512 Trencher, serial no: 2B0042, tyres 31 x<br />
15.5-15, excellent condition. 6691. TA1002653. $29,450 INCL GST<br />
MASSEY FERGUSON 135 TRACTOR 2 wheel drive, approximately 6,400 hours<br />
indicated, roll frame & roof, 45 horsepower approximately * price includes gst.<br />
6724. TA1015626. $10,450 INCL GST<br />
ALSO IN STOCK JOHN DEERE<br />
3320, 4WD, APPROX 3,427 HRS<br />
INDICATED, CAB, 4CYL DIESEL<br />
$29,950<br />
JOHN DEERE 5065M TRACTOR Year approx. 2011, 4 wheel drive, diesel, serial no:<br />
1LV5065MPBJ3472255, engine no: 347255, approximately 4,493 hours indicated, 3<br />
point linkage, air conditioning, enclosed cab, radio/cd, radio UHF/VHF, ROPS<br />
(FRONT WEIGHTS NOT INCLUDED), approximately 65 horsepower. YET TO BE<br />
PRICED. 6754. TA1037949.<br />
$44,000 INCL GST<br />
MASSEY FERGUSON 240 TRACTOR WITH FEL 2 wheel drive, Front End Loader, roll<br />
frame, 3 point linkage, full width bucket double acting all round, approximately<br />
3,100 hours indicated, vin no: 1004, engine no: 261165, 8 speed manual, 45<br />
horsepower approximately. 6761. TA1039017.<br />
$21,950 INCL GST<br />
(2 OF) 1 WITH CAB,<br />
1,800 HRS INDICATED<br />
$11,950<br />
LEYLAND 245 TRACTOR 2 wheel drive, 3 cylinder Perkins, diesel, power steering,<br />
mechanically excellent, tidy, roll frame, approximately 45 horsepower **price incl<br />
GST. 6723. TA1015082. $6,950<br />
CATERPILLAR 916 ARTICULATED FRONT END LOADER 4 cylinder<br />
diesel, serial no: 5KC01779, 4 in 1 bucket. * PRICE INCLUDES GST.<br />
6697. TA1003314. $44,000 INCL GST<br />
KUBOTA B7300 TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4wd, 3 point<br />
linkage, approximately 2,500 hours indicated, Kubota 3cyl direct injection diesel<br />
engine, eng: XA0530, roll frame, 3 cylinder diesel, (SLASHER EXTRA $2,300) *price<br />
includes gst. 6061. TA729856.<br />
$7,450 INCL GST<br />
BOBCAT 328G EXCAVATOR (rubber tracked), 3 cylinder diesel, serial no:<br />
284211534, engine no: 04N0777, approximately 2,730 hours indicated, quick<br />
release bucket, 4 post canopy, swivel boom, levelling blade, hammer piping,<br />
950mm Mud Bucket, excellent condition, approximately 3.5 tonne. 6751.<br />
TA1034628.<br />
$34,500 INCL GST<br />
AMAZONE KE 253 - 170 POWER HARROW WRIGHTS TRACTORS PHONE 08 8323<br />
8795 170 power harrow with tooth packer roller, working width 2.5 metres, little<br />
use. *Price includes GST. 6593. TA948994.<br />
$9,750 INCL GST<br />
WACKER NEUSON E08-01 RUBBER TRACKED EXCAVATOR (0.9.9 tonne), 3 cylinder<br />
diesel, engine no: 88710, vin no: WNCE0801CPAL00328, approximately 1,580<br />
hours indicated, adjustable track width, 3 buckets, back fill blade, ROPS, powered<br />
by Yanmar 3TNV70-VNS *price includes gst. 6719. TA1008892. $16,950 INCL GST<br />
SICMA COSMAG ROTARY HOE Plus many other rotary<br />
hoes in stock. S1820. TA949345. $4,650 INCL GST<br />
JOHN DEERE 5525 TRACTOR Year approx. 2010, 4 wheel drive, serial no:<br />
LV5525R453794, engine no: PE4045T716512, approximately 6,127 hours<br />
indicated, ex Council, enclosed cab, 12 x 11 power/reverser transmission, 2 rear<br />
remotes, 4 cylinder diesel, 540 & 540E PTO, turf tyres Rear 16.9-R24 Front<br />
9.5-R24, rotating beacon, FRONT WEIGHTS NOT INCLUDED, approximately 91<br />
horsepower. 6758. TA1038825.<br />
$39,500 INCL GST<br />
TRACTORS COMING IN<br />
MASSEY FERGUSON 4235, 4X4, CAB, FRONT<br />
END LOADER<br />
NEW HOLLAND T4050<br />
JOHN DEERE 6810, CAB, FRONT END LOADER<br />
CASE 1394, CAB, 4X4<br />
KUBOTA L5030D, 4X4, FEL, CAB<br />
LOCKWOOD ROLLER steel drum, 2 cylinder unleaded, fitted with Honda GX630<br />
petrol mower, drum width 1,100mm approximately *price includes gst. 6672.<br />
TA998723.<br />
$8,500 INCL GST<br />
ALSO FORD NAPIER 20 PLATE<br />
$7,950<br />
JOHN DEERE 17 PLATE<br />
$8,450<br />
GIBBINS RAWLINGS 24 PLATE<br />
$15,850<br />
IHC DISC CULTIVATOR 20 PLATE WRIGHTS TRACTORS PHONE 08 8323 8795<br />
wheeled hydraulic offset trailing disc cultivator, all scalloped discs, as new, been<br />
shedded. *Price includes gst. 6326. TA843867.<br />
$7,950 INCL GST<br />
CASE IH JX70U TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel<br />
drive, powered by Iveco 4 cylinder diesel engine, air conditioning, enclosed cab,<br />
tow bar, 3 point linkage, power take off, AUX hydraulics, 4 speed high/low, approx.<br />
74hp, immaculate condition. 6337. TA847556.<br />
$28,950 INCL GST<br />
CATERPILLAR T9B Chain Trencher, suit Cat Skid Steer or Track Skid Steer, little<br />
use * price includes gst. John - 08 8323 8795, Richard - 0419 820318,<br />
wrightstractors@bigpond.com. 6747. TA1029398.<br />
$6,950 INCL GST<br />
CASE IH MAXXUM 100 TRACTOR 4 wheel drive, approximately 5,900 hours<br />
indicated, ex Council,4 cylinder turbo diesel, transmission 16 speed Hi/Lo, no front<br />
weights, 101 horsepower approximately, 3 point linkage, immaculate. 6628.<br />
TA964798.<br />
$44,500 INCL GST<br />
DIGGA SLASHER ATTACHMENT MODEL SL-000103 5' Slasher Attachment, serial<br />
no: 1705120019, 34 horsepower, weight 380kgs, length 1680mm, width 1540mm,<br />
suit Skidsteer Loader, AS NEW *price includes gst. 6690. TA1001533.<br />
$4,600 INCL GST<br />
INGERSOLL-RAND TRAILER MOUNTED AIR COMPRESSOR 130 CFM approximately,<br />
diesel, serial no: SN315616, vin no: SCZP110WDYY315616, approximately 3,000<br />
hours indicated, Deutz motor model no: F3L 1011, serial no: #00839131, spring<br />
suspension, jockey wheel. 6695. TA1003292.<br />
$8,450 INCL GST<br />
MANITOU BT420 TELEHANDLER BUGGISCOPIC 4 cylinder diesel, serial no: 144412,<br />
engine no: KF805068, chasis no: 1144412, fitted with Perkins engine,<br />
approximately 1,082 hours indicated, fully, cab, extendable boom, fork tynes, multi<br />
purpose bucket, work lights, ex Govt, still has 5 year test valid, * price includes gst.<br />
6717. TA1007961. $36,450 INCL GST<br />
GOLDONI TRACTOR Goldoni Tractor, 4 wheel drive, low gravity, 55<br />
horsepower approximately, tyres excellent all round, runs & starts<br />
beautifully. 6752. TA1036529.<br />
$9,500 INCL GST<br />
HOWARD EHD 7' SLASHER seal & blades, twin depth wheels, galvanised, excellent<br />
condition, ready to go * price includes gst. 6645. TA982110. $7,950<br />
WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA<br />
FFM-FP-5011376-B<br />
WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA
74 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
COLAC | WARRNAMBOOL<br />
357 Princes Highway, Colac West, Vic, 3250<br />
Colac 03 5231 6322 Warrnambool 03 5561 1733<br />
AMAZONE CIRRUS 6003-2C 6M disc seeder c/w seed &<br />
fertiliser, green drill 500lt mounted on back with hoses &<br />
deflector plates, speed discs recently replaced. HW<br />
CONWILSON. TA1038980. $70,000<br />
NEW HOLLAND T8040 Air cab, power shift, 40kph, 4<br />
remotes. Super steer. 69927-F. TA996092. $99,000<br />
NEW HOLLAND RB180 round baler, rotor feed with<br />
drop floor, excellent condition. 78496608. TA1027383.<br />
$33,000<br />
CLAAS ARION 430 Air cab, 16 x 16, power shuttle<br />
40kph, 4 speed pto, loader, bucket, forks, 3rd<br />
function. A2103694. TA1036009. $63,000<br />
RAPID SPRAY 600L 600x 6m, 3pl, pto drive, 600lt<br />
tank, 6m boom spray, c/w hose reel & gun. As new.<br />
11061128. TA1024931. $4,900<br />
KVERNELAND OPTIMA 12 row planter, 20" spacings,<br />
end tow, curly tine machine. Good condition. 8087.<br />
TA1027561. $35,000<br />
GREAT PLAINS SPARTAN 607 Disc seeder 6.0m<br />
working width. Seed & fertiliser hoppers, double disc<br />
opener filling auger. HW390. TA1024899. POA<br />
HARDI NAVIGATOR 4000 x 24mt boom, 3 section<br />
control, granni pot, fast filler, 2015 model. HC1714.<br />
TA961496. $39,000<br />
KEMPER 460S maize front. Fits Claas Jaguar. Good<br />
condition. HC1976. TA1038842. $39,000<br />
AMAZONE ZAM 3000 ULTRA 3000 LTR twin disc<br />
spreader with cover, controller, 24 - 48 mt discs.<br />
ZAM0080758. TA1026701. $16,000<br />
BALDAN CALDOW GRASSLINER drill, 13 run, trailed<br />
tyne drill, dual box. 00161. TA1027564. $10,000<br />
CLAAS ARION 540 CIS Air cab suspension, 24 x 24<br />
power shuttle hexashift 40 kph, 4 speed PTO.<br />
A3401319. TA1015024. $82,000<br />
CASE MAGNUM 285 MX285 Good condition, rear<br />
duals 486/80/1250. 18 x 6 power shift. Quad<br />
remotes. JAZ140478. TA1009076. $59,500<br />
KUHN 5168 Twin auger with new blades 20 cu/ms<br />
capacity, front discharge conveyor. HW329.<br />
TA1001950. $45,000<br />
CLAAS AND KUHN MOWERS Great S/H Selection,<br />
3.0, 3.2 & 3.4m, 3PL Mowers, All W/Shop Checked,<br />
VG Cond. HMVARIOUS. TA160458. FROM $6,900<br />
SCOTT O’HANLON 0429 316 322<br />
GREG HARRINGTON 0438 786 035<br />
JAMIE DUNN 0427 469 400<br />
TREVOR BANT 0459 469 456<br />
www.claasharvestcentrecolac.com.au<br />
FFM-HH-5166595-B<br />
G.W.S. <strong>Machinery</strong> Pty<br />
Ltd<br />
Ph: (02) 4577 4622 Parts: (02) 4577 5833<br />
Fax: (02) 4577 3352 A/hrs: (02) 4579 6071<br />
5 Walker Street,<br />
South Windsor NSW 2756<br />
Email: sales@gwsmachinery.com.au<br />
Web: www.gwsmachinery.com.au<br />
Authorised Agents for:<br />
Massey Ferguson, Iseki,<br />
Branson, Silvan,<br />
Howard Jarrett, Zetor<br />
Kawasaki<br />
NEW TAKE OFFS Complete set of wheels & tyres to suit<br />
Massey Ferguson 540/65R38 & 440/65R28. S167.<br />
TA989409.<br />
$9,000 Inc GST<br />
NEW TAKE OFFS Michelin 13.6R24 tyre. S168. TA989411.<br />
$700 Inc GST<br />
NEW TAKE OFFS Michelin 420/85R34 tyre. S169.<br />
TA989413.<br />
$1,200 Inc GST<br />
NEW TAKE OFFS Michelin 420/70R24 tyre. S170.<br />
TA989414.<br />
$700 Inc GST<br />
MASSEY FERGUSON 5445 4wd, 100Hp, approx 6000hrs,<br />
new paint, fully serviced. S174. TA1021122.<br />
$40,000 Inc GST<br />
KUBOTA M4030 50HP, loader, 4WD, New Paint,<br />
Workshop Checked, Can upgrade to 4in1 bucket at Extra<br />
Cost. S180. TA1039003.<br />
$20,000 inc GST<br />
ISEKI TK538 38Hp, 4wd, turf tyres, hydraulic remotes,<br />
creeper gears. S175. TA1021123. $10,000 Inc GST<br />
TORO 3280D Outfront mower, 72 cutting deck, 4wd,<br />
Kubota diesel engine. S176. TA1021124. $10,000 Inc GST<br />
KAWASAKI MULE 3000 620cc petrol engine, 2WD,<br />
selling as is condition. S159. TA977894. $6,000 Inc GST<br />
ARGO FRONTIER 6x6 Amphibious vehicle, as new<br />
condition, selling on behalf of customer. S160. TA977896.<br />
$12,000 Inc GST<br />
MASSEY FERGUSON 362 Good condition. S179. TA1028867.<br />
POA<br />
FORD 1710 4WD, comes with Jarrett slasher and<br />
carryall, selling on behalf of customer. S156. TA977888.<br />
$12,000 Inc GST<br />
FFM-HH-5011205-A
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 75<br />
We’re big<br />
on the<br />
little things<br />
John Deere compact construction<br />
equipment has landed.<br />
Vanderfield brings you the latest range of skid<br />
steer loaders, compact track loaders and mini<br />
excavators. The equipment may be small, but<br />
our support is huge. Enquire online today at<br />
vanderfield.com.au/register-your-interest/<br />
or call us on 1300 826 337<br />
vanderfield.com.au
76 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
www.massaromotors.com.au<br />
(03) 5191 9369<br />
RAY MASSARO<br />
0417 887 718<br />
CHALLENGER MT525B<br />
Techstar<br />
Tractor<br />
Caterpillar 6.0L 6-cyl<br />
Diesel<br />
CVT Drive<br />
4WD. S411. TA1031139.<br />
$39,990<br />
KUBOTA B7500<br />
21hp Diesel<br />
HST Transmission<br />
60" Deck<br />
Drives Well. S331.<br />
TA1017884.<br />
$9,990<br />
POLARIS RANGER<br />
CREW 900 XP<br />
6 Seater<br />
4 Stroke Engine<br />
VersaTrac Turf Mode<br />
Low Hours. S328.<br />
TA1017819.<br />
$17,990<br />
FIAT 450<br />
45 horsepower<br />
3 cylinder diesel<br />
8 forward 2 reverse<br />
transmission. S275.<br />
TA991409.<br />
$8,990<br />
MAHINDRA JIVO 2025<br />
Tractor<br />
4WD<br />
1060 MM Width<br />
3 Point Linkage<br />
Agriculture Tyres<br />
Draft Sensing. S363.<br />
TA1024691.<br />
$12,500<br />
SUZUKI KINGQUAD 300<br />
4X4<br />
Fully Independent<br />
Suspension<br />
210mm Ground<br />
Clearance<br />
High, Low and Super<br />
Low Range Transmission<br />
Front Differential Locked<br />
4WD. S361. TA1024555.<br />
$5,000<br />
CASE 1190<br />
Case 1190 Tractor<br />
Fully Enclosed Cab<br />
2.7L 3-cyl diesel<br />
Hydrostatic Power<br />
Steering. S368. TA1027176.<br />
$12,000<br />
NEW HOLLAND G6030<br />
4WD Hydrostatic diesel,<br />
Power Steering<br />
4 Post roof, 5 foot Trimax 155<br />
flail mulcher, Diff lock, 2 range<br />
Hydrostatic. Excellent large<br />
area mower. We have 7 ex<br />
council machines in stock.<br />
Perfect for Spring!!!. S430.<br />
TA1039330.<br />
$10,990<br />
KUBOTA MX5200HD<br />
52hp FEL, 3 Range<br />
Hydrostatic, 4WD, Skid<br />
Hitch loader attachment.<br />
S431. TA1039331.<br />
$42,000<br />
Large range of New & Used <strong>Machinery</strong> in Stock<br />
Located at 2-6 BRIDLE ROAD, MORWELL VIC 3840<br />
FFM-HH-5006851-C<br />
37 Cornelia Creek Road<br />
Echuca 3564<br />
Tel: (03) 5482 2788<br />
A/H Damien Trencher 0428 822 788<br />
92 Karook St<br />
Cobram 3644<br />
Tel: (03) 5871 3333<br />
A/H Mario Mete 0438 389 916<br />
ENFORCER M SERIES 35 Enforcer 3.5T, 4WD Diesel<br />
Forklift, 50.1 engine hrs. Rough terrain Forklift, 2018<br />
Model. 3500kg lift capacity, 3 Stage Mast, side shift.<br />
Comfort-class suspension seat, scales. At Shepparton<br />
dealership. S413. TA1002745. $49,500<br />
NEW HOLLAND BB1290S PLUS BB1290 Standard Plus<br />
Big Square Baler, 27,564 bales, moisture meter, weigh<br />
scales, going through workshop, very straight baler, AT<br />
OUR ECHUCA DEALERSHIP, 0354822788. S442. TA1038983.<br />
$132,000<br />
NEW HOLLAND T4050F Orchard/Vineyard Tractor, 95Hp,<br />
4688Hours, Good Condition, Located in Cobram. S441.<br />
TA1036826. $36,300<br />
NEW HOLLAND RB180 SUPER FEED big wheels, done<br />
20,900 bales, been through workshop, neat tidy baler<br />
located at Cobram dealership 0358713333, 6ft x 4ft<br />
bales, variable chamber,. S438. TA1034386. $41,800<br />
NEW HOLLAND T4030F .. S437. TA1031439. $34,000<br />
NEW HOLLAND CR8090 CR 2012, New Holland CR8090<br />
Smarttrax, 1940e & 1264r Hrs, Optispread Chopper, PSD,<br />
Class 8, Macdon D60 40ft Draper Front, Located at<br />
Shepparton. S352. TA930781. $396,000<br />
NEW HOLLAND CR9080 2009, 83C 40ft draper front<br />
(Macdon) on trailer, 2724e & 1971r hrs, 2009, twin 22"<br />
rotors, MAV chopper, singles. S353. TA930864. $308,000<br />
For our full list of available equipment please visit:<br />
http://echuca-rural.tradefarmmachinery.com.au/<br />
LANDINI REX 105 GT Good condition. 3987 Hours.<br />
Located in Cobram. S440. TA1036821. $26,400<br />
WEBSITE UPDATED DAILY http://www.echucarural.com.au<br />
FFM-HH-5011691-A
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 77<br />
WANTED CONNOR SHEA<br />
SEEDERS, ANY CONDITION.<br />
IF WE HAVEN'T GOT IT, WE'LL GET IT!<br />
LELY LOTUS TEDDAY RAKE 3PL .. S1895.<br />
TA1029440. POA<br />
SAME FRUTTETO 1985, with a/c<br />
forklift 3PL 85hp. S1717. TA942864. POA<br />
SHEARER GEHL 1460 ROUND BALER<br />
.. S1899. TA1029444. POA<br />
GEHL MX100 HAMMER MILL MIXER<br />
TA1015787. POA<br />
FORD NEW HOLLAND 4635 A/C, 3PL,<br />
90% tyres. S1618. TA907655. POA<br />
MASSEY FERGUSON 124 HAY BALER<br />
(SMALL SQUARE). S1891. TA1025101. POA<br />
AGROWPLOW 3PL 5 TYNE WITH<br />
SPEED BOX. TA1015794. POA<br />
KUBOTA M7500 Diesel, 3PL, power<br />
steering, 78hp. S1805. TA998760. POA<br />
INTERNATIONAL ROTARY HAY RAKE<br />
PTO 3PL .. S1897. TA1029441. POA<br />
HARRINGTON CATTLE CRUSH<br />
(BEEFMASTER). TA954517. POA<br />
2.5 TON MARSHALL TWIN SPIN BELT<br />
SPREADER. POA<br />
KVERNELAND 4 FURROW MOULDBOARD<br />
PLOUGH 3PL TA1015799. POA<br />
HARDI 400LTR BOOMSPRAY 3PL .. S1870.<br />
TA1025089. POA<br />
DUNCAN 734 TRIPLE DISC SEEDER<br />
19 RUN POA<br />
ISEKI BOLEN G212 TRACTOR 21hp, ROPS,<br />
diesel, 3PL. S1835. TA1015810 POA<br />
TRAVELLING IRRIGATOR (SUIT FIRE<br />
FIGHTER). TA954515. POA<br />
HYDRAULIC TIPPING TRAILER 9’ X 6’<br />
.. S1898. TA1029443. POA<br />
ELITE WMI HAY FEEDOUT TRAILER ..<br />
S1874. TA1025094. POA<br />
NEW HOLLAND 2A SILAGE CART.<br />
TA954522. POA<br />
FEEDOUT WAGON 20 BAG .. S1889.<br />
TA1025100. POA<br />
TAARUP 106 FORAGE HARVESTER.<br />
TA1015815 POA<br />
MCKAY DOUBLE GROUPER WITH<br />
HONDA MOTOR. POA<br />
7' 3PL AERATOR. POA<br />
CRUMP KURRAJONG SPREADERS 1<br />
and 2 Ton. TA930948. POA<br />
CONNOR SHEA 9` DISC SEEDER Ready<br />
to work TA1015826. POA<br />
3PL ROCK RAKES 6 TO 10 FT<br />
WINDROWS, RAKES & LEVELS,<br />
6’, 8’ & 10’. TA307516. POA<br />
WALLACE 5 TYNE SUBSOIL PLOUGH<br />
WITH COULTERS. TA954520. POA<br />
BERENDS 8’ GRADER BLADE 3PL .. S1876.<br />
TA1025095. POA<br />
ROTATING WEED WIPERS 9’6” COVER<br />
SUIT QUAD, UTE OR TRACTOR.<br />
TA449307. POA<br />
CHRISGROW 8’ 3PL SLASHER .. S1886.<br />
TA1025099. POA<br />
AGRO-SEEDER 21 RUN COIL TYNE<br />
BAKER BOOT DIRECT SEEDER.<br />
S1591. TA883299. POA<br />
COMBINE AND SEEDERS<br />
Connor Shea 5' & 7', 3PL disc seeder<br />
Seedling planter (Ellis) rotary<br />
6' & 8' roller seeders<br />
9' Connor Shea disc seeder trail<br />
C seeders<br />
Ellis and Sons 4 row seeders<br />
Inter 24 run combine<br />
MF 55 12 run combine<br />
7' Ezy-Sow seeders 3PL $2,900<br />
HAY EQUIPMENT<br />
Small square balers: NH 317, NH 275, NH 69, MF 12.<br />
Claas<br />
Mower con - in stock<br />
MF 3PL roller bar<br />
KINGPACKER ROLLERS 8’ TO 15’.<br />
S1753. TA958959. POA<br />
ACRES OF NEW & USED MACHINERY & SPARES<br />
NH 339 double chop forage harvester<br />
Hay Feed out buggy (Pearce)<br />
Baler, rakes, mower, handlers, elevators and spare parts.<br />
Rakes, finger wheeeled 3PL, 3PL roller bar, tedder &<br />
rotary.<br />
MISCELLANEOUS<br />
Buttsworth scoops 1 yd<br />
3 tyne Moorehouse ripper, 3PL.<br />
Harrows cover, diamond, pasture & stump jump.<br />
Bait layes<br />
2, 3 & 5 tine rippers.<br />
Harland irrigation pump, PTO.<br />
Daken 3PL forklift<br />
Piston pump 5" x 4" (DGM)<br />
3PL stick rakes 6' to 10' new & sh<br />
GRIZZLY GRUMPY WHEELED OFFSET<br />
DISC PLOUGH 32 DISC. TA1015793. POA<br />
Forage harvesters & carts, NH Gehl & Tiki<br />
Rollers (Cambridge), culti packers, stones & tyre)<br />
7' to 28'.<br />
PTO hammermills, roller mills, grain gristers. From $595<br />
3PL, 5-9 tine trail, 8-14 tine chisel ploughs From $795<br />
Irrigation pipes, pumps & motors, travelling irrigators.<br />
Scoops, 3PL, silt blades, carryalls and rippers.<br />
2nd hand tractor tyres, belt pulleys, PTO From $195<br />
2nd hand new tines Augers, 50' x 6" & 8", pencil 14' x 4"<br />
new and 2nd hand.<br />
Harrows all types From $45<br />
Boom sprays, 3PL, Hardi and Silvan, 400 & 600ltr.<br />
Power Harrows 3PL Lely 15'<br />
Crump (Kurrajong 1000) 1 tonne trailing<br />
Manure-lime & super spreaders Super spreaders ground<br />
MASSEY FERGUSON 24 DISC<br />
WHEELED OFFSET PLOUGH .. S1690.<br />
TA937764. POA<br />
drive, ½ - 4.5 tonne.<br />
9' Roto wiper, new & secondhand<br />
Vicon spreaders 10 to 30 bag,<br />
Hardi 1200 ltr boomspray trail, foam & PTO.<br />
OFFSET/DISC PLOUGHS<br />
Grizzly 20 424 disc<br />
Gibbons Rawlings 28 plate<br />
SCARIFIERS & TILLERS<br />
Ferguson scarifiers 3PL<br />
19 tyne Bagshaw scarifier towable<br />
SHEEP AND CATTLE<br />
Feeders (hay & grain)<br />
Cattle Scales<br />
Feedout bins and trailers.<br />
CONNOR SHEA 9’ BAKER BOOT With<br />
Coulters. S1606. TA900741. POA<br />
Shearing plants, grinders, lamb cradles, handlers,<br />
wool pressers, bail heads, crushes, wool tables, hyd<br />
woolpress.<br />
SLASHERS<br />
8’ slasher 3PL (superior)<br />
2.3 high body Nobili mulcher<br />
TRAILERS<br />
HYD Tipping 10' x 6'<br />
Freighter 4 wheel trailer<br />
Tipping trailer 8' x 6' From $975<br />
TRACTORS<br />
Ford 3000, 45hp, 3PL, P-Steer. FE Loader.<br />
Fergie TEA20 petrol<br />
FFM-FP-5013027-TS-386<br />
**DELIVERY ARRANGED AUSTRALIA WIDE** SPARE PARTS: NEW AND S.H. AVAILABLE : FOR MOST EQUIPMENT<br />
WANTED: Tractors and <strong>Machinery</strong>, any condition, anywhere Call Selwyn on (02) 6227 7227 or (02) 6227 7261<br />
Hume Highway, Bookham (YASS) 2582 • OPEN 8 TO 5 MON-FRI • AH: (02) 6226 2316
GET A<br />
SMOKING<br />
HOT<br />
DEAL<br />
FOR FATHER’S DAY<br />
via Auto-RENEWAL<br />
To subscribe visit magshop.com.au/dad1
MO0620P000_COV_R6 2020-05-20T11:58:31+10:00<br />
fb0720p000_COV 2020-05-11T17:28:25+10:00<br />
Exclusive data reveals<br />
most popular used trucks<br />
and trailers<br />
Scania numbers add<br />
up for Perth’s Warners<br />
Transport & Distribution<br />
Mercedes-Benz<br />
launches first-ever<br />
Oz truck with cameras<br />
for mirrors<br />
DOW 454 cover section pages for digital magazines.indd 1<br />
Frank and Christine<br />
Commisso’s stunning<br />
Kenworth T909<br />
29/05/2020 8:05:09 AM<br />
wh0720p000_Cov 2020-06-03T18:29:41+10:00<br />
AD-623188080.als - Base Edition 1<br />
AD-622305252.als - Base Edition 1<br />
1977 HOLDEN HX MONARO GTS<br />
308, M21 4 speed, chamois trim. WA. 02 6171 3030.<br />
Visit tradeuniquecars.com.au for more.<br />
1986 HDT VL SS GROUP A<br />
Build #419, 165,154kms, Polarizer fitted. WA. 08 6500 0943.<br />
Visit tradeuniquecars.com.au for more.<br />
$9.95 NZ $11.95<br />
1970 LOTUS ELAN<br />
Body off paintwork, sensible upgrades. NSW. 0419 449 022.<br />
Visit tradeuniquecars.com.au for more.<br />
13/5/20 2:10 pm<br />
18/5/20 4:44 pm<br />
.<br />
AD-620946805.als - Base Edition 1<br />
SM0620p000_cov_R2 2020-05-06T12:26:34+10:00<br />
EMM 372 FINAL.als - Base Edition 1<br />
$198,000 $36,000<br />
Volvo L90F Wheel loader. 2 available, 2007 and Finlay Hydrascreen. 8x4 power screen, 3 cyl<br />
2011, price for 2011 model n NSW 0427 698 366 Deutz diesel, 60ft stacker n VIC 0408 544 131<br />
$116,500<br />
BAUER MEDIA: GOLD MEDIA SPONSOR<br />
16-18 Oct 2020 – PANTHERS PENRITH SYDNEY<br />
AUSTRALIA’S LARGEST<br />
CONSTRUCTION<br />
EQUIPMENT EXPO<br />
2006 CAT 966H Wheel loader. In chassis rebuild<br />
around 2016. Runs well. n SA 0418 700 920<br />
13/5/20 2:03 pm<br />
AD-620946805.als - Base Edition 1<br />
$280,500 $65,000<br />
$5,899 $53,460<br />
CASE IH 8230. 3491 hours, 2250 rotor hours,<br />
auto steer pro 700 screen • VIC 0428 644 490<br />
AD-622934258.als - Base Edition 1<br />
See page 27<br />
OWD 329.als - Base Edition 1<br />
2010 John Deere 6630. Exc cond, power quad<br />
trans, quick hitch + more • QLD 0419 988 158<br />
3/6/20 3:45 pm<br />
2015 Polaris Ranger 900 XP EPS. High lifter,<br />
331 hours, good condition • WA 08 6102 5127<br />
items for sale<br />
in print & online<br />
2020 Frahn VAL1500-6. Grain cleaner, 3<br />
phase power, tandem axle • VIC 0418 504 269<br />
Trucks, utes and<br />
4x4s now for sale!<br />
3/6/20 3:45 pm<br />
11/5/20 1:47 pm<br />
27/5/20 9:50 am<br />
Subscribe<br />
Nab your Dad a subscription<br />
to his favourite magazine at<br />
a great discount price!<br />
GULP…THE GRILLE IS REAL!<br />
Controversial new 4 Series previews the next M4!<br />
200hp Tractor Reviews<br />
14 PAGE SPECIAL FEATURE<br />
Issue 386 > $7.95 > On sale 18/06/20<br />
Tractors, farm machinery & materials handling equipment for sale<br />
>> INSIDE<br />
Shifting Focus<br />
Hino FS 2848<br />
200hp Tractor Reviews<br />
Chain Reaction<br />
Issue 386 > $7.95 > On sale 18/06/20<br />
Brookfield Chainbar D90<br />
Rural Youth<br />
14 PAGE SPECIAL FEATURE<br />
Top Tractor Toys<br />
Tractors, farm machinery & materials handling equipment for sale<br />
>> INSIDE<br />
june 2020 whichcar.com.au/motor HOT PURSUIT! BMW M8 COMPETITION VS PORSCHE 911 TURBO S<br />
P O W E R + P E R F O R M A N C E + P A S S I O N<br />
june 2020 $11.95 NZ $12.50<br />
whichcar.com.au/motor<br />
BAHN<br />
BMW M8<br />
VS PORSCHE<br />
911 TURBO S<br />
BURNERS<br />
HAS BIMMER’S 460kW TWIN-TURBO V8 UBER-COUPE<br />
PICKED A FLAT-SIX FIGHT IT CAN’T HOPE TO WIN?<br />
Exclusive<br />
TWIN<br />
TEST<br />
Driven<br />
➜<br />
FORD FOCUS ST 206kW<br />
rocket is the driver’s hot hatch<br />
h<br />
LAMBO HURACAN RWD<br />
Fallen from rear-drive heaven<br />
MINI JCW GP Nailing 281km/h<br />
in the most feral Mini ever<br />
BMW X5 M Is this M5-on-stilts<br />
the best fast SUV yet?<br />
JULY 2020<br />
THE TURBO ISSUE! – FIESTA ST vs RIVALS – BMW’S GRILLE-TASTIC 4 SERIES<br />
whichcar.com.au/wheels<br />
✴<br />
Racing’s<br />
turbo<br />
titans!<br />
A U S T R A L I A ’ S C A R M A G A Z I N E<br />
T U R B O S P E C I A L<br />
of<br />
✴<br />
First drive of 911 Turbo spools<br />
our tribute to forced induction<br />
Aussie<br />
turbo buyer’s<br />
guide!<br />
JUL<br />
2020<br />
$10.95<br />
NZ $11.50<br />
,!3BD0A6-aaejdg!:K;R<br />
more<br />
DISCOVER<br />
DISCOVER<br />
moreJohn Deere 6M tractors offer more technology,<br />
John Deere 6M tractors offer more technology,<br />
comfort and more visibility to the<br />
mid-power tractor range >> Page 14<br />
more comfort and more visibility to the<br />
mid-power tractor range >> Page 14<br />
CASE IH 8230. 3491 hours, 2250 rotor hours, 2010 John Deere 6630. Exc cond, power quad 2015 Polaris Ranger 900 XP EPS. High lifter, 2020 Frahn VAL1500-6. Grain cleaner, 3<br />
auto steer pro 700 screen • VIC 0428 644 490 trans, quick hitch + more • QLD 0419 988 158 331 hours, good condition • WA 08 6102 5127 phase power, tandem axle • VIC 0418 504 269<br />
$65,000<br />
$280,500 $5,899 $53,460<br />
items for sale<br />
in print & online<br />
Trucks, utes and<br />
4x4s now for sale!<br />
39,015+<br />
,!3BD0A6-aaejdg!:K;R<br />
Shifting Focus<br />
Hino FS 2848<br />
Chain Reaction<br />
Brookfield Chainbar D90<br />
Rural Youth<br />
Top Tractor Toys<br />
8,055+<br />
39,015+<br />
8,055+<br />
13 issues | $79.95<br />
SAVE 48.5%<br />
13 issues | $79.95<br />
SAVE 43.8%<br />
13 issues | $49.99<br />
SAVE 51.6%<br />
JUNE 2020 NO.440 6X6 LANDCRUISER CUSTOMS • TASSIE 4X4 ADVENTURE • MAHINDRA PIK-UP • AMAROK V6 MANUAL<br />
AUSTRALIA’S SIX<br />
SHOOTERS<br />
BEST<br />
6X6 LANDCRUISERS<br />
DUEL IN TASMANIA<br />
PLUS<br />
5 GREAT<br />
ESCAPES<br />
OUR TOP POST-<br />
LOCKDOWN TREKS<br />
START YOUR<br />
PLANNING NOW!<br />
TRUCKIN’<br />
GOOD<br />
BUYER'S GUIDE<br />
BUYING A RANGE<br />
ROVER CLASSIC<br />
DRIVEN<br />
AMAROK V6<br />
MANUAL TESTED<br />
JUNE 2020<br />
ISSUE NO.440<br />
$9.95 (NZ $10.95)<br />
SILVERADO 1500<br />
LANDS DOWN<br />
UNDER AND WE<br />
DRIVE IT<br />
GEMINI GYPSY RESTORATION!<br />
WILD BOND BUG<br />
MERCEDES-BENZ W126<br />
MITSUBISHI EVO<br />
,!3BD0A6-aabjae!:k;P<br />
$79,500<br />
+ 440 POWERED ROADRUNNER!<br />
$89,888<br />
$42,500<br />
ISSUE 440<br />
May 28, 2020<br />
XD | PHASE 5 | PROTO #1<br />
FORCE FIVE!<br />
Toybox: Rolls-Royce, Audi, Cobra + Torrens' latest toy<br />
+ Our cars: Monaro + Mick's Workshop & Much more!<br />
JUNE 2020<br />
FRONT/BACK LC TORANA BIG-BLOCK CAMARO LEGEND: NORM HARDINGE TWIN-TURBO EL GT HOWARD NESSEN’S XB COUPE<br />
READERS’ ISOLATION PROJECTS ❖ CHRYSLERS ON THE MURRAY ❖ HOW TO: PAINT YOUR CAR<br />
whichcar.com.au/streetmachine<br />
facebook.com/streetmachinemagazine<br />
$9.95incl 95i l GST<br />
NZ $10.45 incl GST<br />
EYES FRONT!<br />
OGILVIE TORANA IS BACK & BADDER THAN EVER<br />
LEGEND: NORM HARDINGE > BIG-BLOCK CAMARO > 7SEC VC COMMODORE ❖<br />
13 issues | $79.95<br />
SAVE 38.2%<br />
13 issues | $79.95<br />
SAVE 38.2%<br />
12 issues | $79.95<br />
SAVE 38.2%<br />
12 issues | $34.99<br />
SAVE 65.7%<br />
Issue 454 $7.95<br />
On sale 08/06/20<br />
Deals Data<br />
Working Deals<br />
New Deals<br />
Fruits of<br />
Labour<br />
AUSTRALASIAN BUS & COACH<br />
ABC<br />
ISSUE 393 May 2020 $5.95 inc GST<br />
BUS TENDERS<br />
LAST NSW REGIONS<br />
COVID-19 TESTING<br />
SCANIA-INCOLINK BUS<br />
$54.5 MILLION<br />
QLD TRANSPORT<br />
PACKAGE<br />
TECH<br />
FOCUS<br />
The decade ahead in mining<br />
Issue 372 • $7.95<br />
On sale 25/05/20<br />
Earthmovers, excavators, plant & equipment for sale<br />
INSIDE<br />
Pull your weight<br />
The most practical<br />
dump trucks in focus<br />
Buck the trend<br />
Construction industry<br />
proves its resilience<br />
ownerdriver<br />
JUNE 2020 #329 $3.00 inc. GST<br />
DEDICATED TO THE SUCCESS OF THE PERSON BEHIND THE WHEEL<br />
EURO INGENUITY<br />
OWNERDRIVER.COM.AU<br />
Driver-friendly<br />
initiatives lift<br />
Pocket<br />
Benz Actros to<br />
roadtrains<br />
new levels<br />
Scania thriving in<br />
WA container<br />
of safety<br />
operations<br />
See page 22<br />
Road user<br />
reprieve<br />
Government<br />
offers transport<br />
charge relief<br />
Sideloaders<br />
Supreme<br />
Proven design and quality engineering is behind the success of Drake Group’s<br />
O’Phee Boxloader and Swinglift side loader Full story page 14<br />
THOUSANDS OF<br />
USED TRUCK<br />
DEALS<br />
in print and online at<br />
TRADETRUCKS.com.au<br />
40' 3-way Tri-axle<br />
Container Skel $65,837<br />
40/20' Boxloader Container<br />
Sideloader/Simplex $222,629<br />
40/20' Swinglift In-line<br />
Sideloader 35T $214,743<br />
For more great trailer deals call The Drake Group on 07 3171 1033<br />
Could coach travel<br />
now reach its full potential?<br />
INTERSTATE<br />
operator: ltd bus & coach driven: volgren electric tech: fuel cell alliance<br />
,!3BD0A6-aaejcj!:K;q<br />
TRUE<br />
Gippsland contractor Riley Earthmoving adds<br />
new 35-tonne SK350LC-10 to its growing Kobelco<br />
fleet, which is now hard at work excavating an<br />
Blueirrigation dam near Bairnsdale >> Page 28<br />
42,980+<br />
items for sale<br />
in print & online<br />
18,100+<br />
Trucks, utes &<br />
4x4s now for sale!<br />
16 32 40<br />
FFM-DPS-5016473-CS-387<br />
13 issues | $49.99<br />
SAVE 51.6%<br />
12 issues | $34.99<br />
SAVE 51.0%<br />
13 issues | $49.99<br />
SAVE 51.6%<br />
12 issues | $29.99<br />
SAVE 16.7%<br />
or call 136 116 and quote F20FDAD
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 80<br />
HAYMOWERS SLASHERS MULCHERS<br />
A/H: (03) 5382 4234<br />
Fax: (03) 5381 0380<br />
Mobile: 0418 810 370<br />
87-89 Dimboola Road,<br />
HORSHAM, Vic 3402<br />
ABN 47 1934 965 94<br />
Tel: (03) 5381 0370<br />
RFM COLT<br />
RFM Colt 32 tines x 200mm (8")<br />
spacing, Berigan finger tine harrows<br />
c/w 2 Bin + SSBox air seeder.<br />
HM788. TA1015742.<br />
Coming In POA<br />
GASON SCARITILL SNFH45-200<br />
SNFH45-200<br />
Gason Scaritill, 9m, Floating hitch, 200mm<br />
spacing, 400lb, Dual hose kit and rolling<br />
prickle harrows.. HM789. TA1012978.<br />
$60,500<br />
• Boomspray Tanks<br />
• Fire Fighting Tanks<br />
• Flushing Tanks<br />
• Foam Marker Tanks<br />
• Chemical Tanks<br />
• Cartage Tanks<br />
• Flexi-N Tanks<br />
• Cone Mixing Tanks<br />
• Brewing Tanks<br />
• Fire Fighting Units<br />
• Ute Tanks<br />
• Pest Control Tanks<br />
• Diesel Tanks<br />
• 300 Different Types<br />
• Factory to <strong>Farm</strong><br />
Reduce your cutting time!<br />
Call us on 08 8584 7609 or visit<br />
www.loxtonengineering.com.au<br />
16 Starcevich Road, Box 18 LOXTON SA 5333. Fax 08 8584 6380<br />
Quality Agricultural<br />
Tanks<br />
Factory Direct<br />
• Wholesale Pricing<br />
www.rotamoulding.com.au<br />
Phone Troy - (08) 9250 1125<br />
FFM-SV-5031445-CS-373<br />
NEW HOLLAND T7.210<br />
2017, New Holland T7.210 AutoCommand, 1650Hr's,<br />
50KPH Vario Transmission, Premium Suspended Cab inc<br />
Air suspension leather seat climate control & bluetooth<br />
radio, Premium front linkage with PTO & 1 x SCV, Front<br />
axle Suspension, 4 x Rear SCV, 540 & 1000RPM Rear<br />
PTO, ISOBUS, Hyd Trailer Brakes, Hyd Power Beyond &<br />
LS ready, MICHELIN 480/80R42 & 380/85R30. $145.000 +<br />
GST. Can arrange wider tyres, front loader & delivery AUS<br />
WIDE POA. CALL JASON 0402 851 544, T72102017. VIC.<br />
DIY1037849. 0402 851 544. $159,500 = $145,000 + GST<br />
TRACTOR TYRES NEW<br />
BRAND NEW tractor tyres. Various brands, BKT, Harvest,<br />
Logger tyres, Apollo, Goodyear, Firestone, TIANLI Nokian,<br />
Simex, Westlake etc. Most sizes, bias & radial / forestry,<br />
truck & earthmover as well. Call Mick anytime, .. QLD.<br />
DIY561636. 0413 389 356.<br />
$99 From<br />
FRAHN HCC-50<br />
2019, grain cleaner recycled air wind tunnel. Horizontal<br />
Cyclone-Complex. (HCC. Capacity Model 50 HCC.<br />
Pre-cleaning. 50 TPH. Quality cleaning 15-35 TPH,<br />
HCC-501708030. VIC. DIY823036. 0418 504 269. $39,490<br />
JOHN DEERE 7530 PREMIUM<br />
2009, 9750Hr's, 180HP, 50KPH PwrQaud Transmission,<br />
Front Axle Suspension, Premium A/C Cab with Hyd cab<br />
suspension & Air suspended seat, UHF & CD Radio,<br />
STOLL FZ60.1 front loader with soft ride 3rd function &<br />
Euro hitch, 1000/540 PTO, 2 x Mech SCV, Air trailer<br />
brakes, $69.000 + GST. Can Arrange delivery Australia<br />
Wide POA. Call Jason 0402 851 544, 75302009. VIC.<br />
DIY1038143. 0402 851 544. $75,900 = $69,000 + GST<br />
JOHN DEERE 4640 TRACTOR<br />
Excellent condition, 150 hp, always serviced/ shedded, 1<br />
owner, 12k hrs, lic, new tyres duals, power shift, iso, 2<br />
way, a/c, radio, gears 16, ag inspect interstate, .. WA.<br />
DIY1036702. 0428 305 750.<br />
$24,200 Incl GST ONO<br />
WESTERN STAR 4864 FX CONSTELLATION<br />
2009, WESTERN STAR TIPPER TRUCK & 2010 QUAD<br />
AXLE TRAILER COMBINATION<br />
- 19M PBS COMPLIANT - 39.50T PAYLOAD, ZIW225.<br />
NSW. DIY1036397. 0418 680 160. $145,000 INCL GST<br />
GYRAL AG-BOSS<br />
Gyral Ag-Boss hyd tine,<br />
Coulters and press<br />
wheels on 300mm<br />
spacing.. HM775. TA900984.<br />
$44,000<br />
For our full range of equipment please visit:<br />
hicks-machinery.tradefarmmachinery.com.au<br />
FFM-TV-5013318-A<br />
FRAHN VAL1500 - 6<br />
2020, grain cleaner. 3 phase power. Approx 6 25plus<br />
tonnes p/hour. Tandem axle suspension with new 15"<br />
tyres & wheels, VAL15006231708027. VIC. DIY823029.<br />
0418 504 269. $53,460 Incl GST<br />
FRAHN CAP - 10<br />
2019, Gravity table. (Capacity 10TPH on Cereals) is used<br />
for fine grading & impurity separation of grains & small<br />
seeds with identical particle size but different in their<br />
specific weight, CAP10201708033. VIC. DIY823049.<br />
0418 504 269. $46,090
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 81<br />
02 6725 4617<br />
ruralwrecking.com.au<br />
parts@ruralwrecking.com.au<br />
337 Oakwood Road, Inverell NSW 2360<br />
ABN: 48 053 335 667<br />
WANTED TO BUY TRACTORS FOR WRECKING<br />
Parts available for most makes and models of tractors<br />
CASE<br />
585, 595, 685, 695, 800, 830, 832, 870<br />
2WD, 885, 895, 900, 930, 932, 956, 970,<br />
1030, 1032, 1070, 1194, 1270, 1370,<br />
1390, 1394, 1594, 1690, 2090, 2094,<br />
2096, 2290, 2290, 2294, 2390, 2394,<br />
2470, 2590, 2594, 2670, 2870, 3394,<br />
3594, 4230, 4496, 4694, 4994, 7110,<br />
CVX 170, MAGNUM 275, MAGNUM<br />
275, MAGNUM 290, MAGNUM 305,<br />
MX80C, MX255, MX285, PUMA, STX 375<br />
QUADTRACK, STX 440 QUADTRACK,<br />
STX 450<br />
CASE IH<br />
1896, 4690, 4890, 4894, 5120, 5130,<br />
5140, 5150, 7120, 7130, 7140, 7150,<br />
7220, 7230, 7240, 7250, 8910, 8920,<br />
8930, 8940, 8950, 9130, 9150, 9170,<br />
9180, 9250, 9260, 9280, 9350, 9370<br />
QUADTRACK, 9380 QUADTRACK, 9390,<br />
MX90, MX130, MX135, MX230, MX240,<br />
MX270, MXM190, STX375, STX440<br />
CATERPILLAR<br />
CHALLENGER SERIES – 35, 45, 55, 65,<br />
65C, 75, 75C, 75E, 85C, 85D, 95E, 65E<br />
TRACK MACHINE, MT765D<br />
FORD<br />
3000, 3610, 4000, 4600, 4610, 5000,<br />
5610, 5640, 6000, 6600, 6610, 6700,<br />
6810, 7000, 7600, 7700, 7710, 7840,<br />
8000, 8210, 8230, 8340, 8401, 8600,<br />
8700, 9000, 9600, 9700,, TW5, TW10,<br />
TW15, TW20, TW25,<br />
INTERNATIONAL<br />
385, 414, 434, 444, 484, 514, 554, 564,<br />
574, 585, 624, 660, 674, 686, 696, 706,<br />
756,766, 786, 856, 866, 885, 886, 956,<br />
976, 986, 1056, 1066, 1086, 1256, 1466,<br />
1468, 1486, 1566, 1568, 1586, 3288,<br />
3388, 3588, 3688, 3788, 4166, 4186,<br />
4366, 4386, 4568, 4586, 4786, 5088,<br />
5288, 5488, 6388, 6588, 6788, 844S,<br />
AW6, AW7, AWD6, AWD7, B250, B275,<br />
W6, W7,<br />
JOHN DEERE<br />
6170R, 950, 1050, 1130, 1140, 1640,<br />
1750, 2010, 2020, 2030,2040, 2120, 2130,<br />
2140, 2250, 2450, 2650, 2850, 3010,<br />
3020, 3120, 3130, 3140, 3350, 3640,<br />
3650, 4010, 4020, 4030, 4040, 4050,<br />
4055, 4230, 4240, 4250, 4255, 4430,<br />
4440, 4450, 4455, 4555, 4560, 4620,<br />
4630, 4640, 4650, 4755, 4760, 4840,<br />
4850, 4955, 4960, 5010, 5020, 5310,<br />
5515, 5300, 6030, 6200, 6300, 6310,<br />
6320, 6330, 6400, 6410, 6620, 7210,<br />
7510, 7520, 7600, 7610, 7700, 7800,<br />
7810, 7920, 8100, 8200, 8285R, 8300,<br />
8310, 8330, 8345RT, 8400, 8400 TRACK,<br />
8410, 8430, 8360RT, 8440, 8450, 8520,<br />
8520T, 8530, 8630, 8640, 8650, 8760,<br />
8770, 8850, 8960, 8970, 9400, 9410R<br />
NEW HOLLAND<br />
7840, 8430, 8560, 8870, 9482, 9682,<br />
9860, 9880, 9882, 9482, 9484, G210,<br />
G240, L85, L95, T6020, T7030, TG230,<br />
TG235, TG255, TG285, TJ425, TJ450,<br />
TM125, TM135, TN55D, TN95F, TS100,<br />
TS100A, TS110A, TS125A, T9060<br />
STEIGER<br />
KP525, KP 1350, KP1325, KP1400,<br />
BEARCAT 3 & 4, COUGAR 2 & 4 CM250,<br />
PANTHER 2, PANTHER 3 ST310 &<br />
ST325, PANTHER 4 CM325, TIGER<br />
ST470,<br />
VERSATILE<br />
500, 700, 800, 835, 855, 875, 895, 900,<br />
935, 945, 946, 950, 956, 975, 976, 1150,<br />
1156<br />
ALSO WRECKING<br />
VARIOUS MODELS OF<br />
CHAMBERLAIN, DEUTZ FAHR, FIAT,<br />
JCB, LAMBORGHINI, MASSEY<br />
FERGUSON, MCCORMICK, SAME<br />
– CALL US TO ENQUIRE<br />
Follow us on Facebook to keep<br />
up to date with new stock that’s<br />
regularly coming in.<br />
@ruralwrecking<br />
Wrecking largest range of tractors in Northern NSW<br />
FFM-FP-5211221-TS-387
82 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
POOLE &<br />
JACKSON<br />
SPEED & WALPEUP<br />
ABN 28 100 780 069<br />
Ph: 03 9998 4998<br />
PTY LTD<br />
Lyndoch Motors<br />
Phone: (08) 8524 4140<br />
Jeffrey Both: 0428 844 271<br />
AH: (08) 8563 2387 SA<br />
Graham Ahrens: 0429 846 011<br />
AH: (08) 8524 4309 SA<br />
Duncan McInereney<br />
AH: 0427 245 140<br />
Visit our site: www.lyndochmotors.com.au<br />
email: sales@lyndochmotors.com.au<br />
COBRAM FARM EQUIPMENT PTY LTD<br />
Ph (03) 5872 1722 (03) 5872 1265<br />
A/H (03) 5865 8262<br />
Lot 3, Murray Valley Highway<br />
PO Box 26, Cobram, Vic 3644<br />
ACN 086 668 108<br />
MASSEY FERGUSON<br />
MASSEY FERGUSON 5200-36 5200-36 pick up draper windrower On Behalf<br />
Of Client. S44. TA907089. $33,000<br />
CASE IH 8230 2012, r/trap, chopper, 40' 2152 draper c/w hyd. top link, float optimiser,<br />
levelling wheels & cross auger, pre season serviced, 1608 s/hrs. S207. TA926482. $352,000<br />
NEW HOLLAND H8080<br />
Windrower with 15.5ft disc mower conditioner,<br />
Mow Max front, also 25ft draper end knives and<br />
trailer. S31. TA759375.<br />
POA<br />
CASE IH 7130 2012, chopper, 2013 build 40' 2152 draper c/w hyd. top link, float optimiser,<br />
levelling wheels & cross auger, 1400 s/hrs, pre season serviced. S228. TA988987. $319,000<br />
HARDI COMMANDER 5030 2003 Commander V 5000 Litre tank 30mtr boom<br />
463 spray pump pilot controller triplet nozzles chemical hopper.<br />
OBC. S47. TA1016214. $22,000<br />
HORWOOD BAGSHAW SCARIBAR 350 Suit Rear Tow Seeder AGMASTER<br />
Press Wheels. 42' Wide. 15 Inch, Extra Original Tines Available. Originally<br />
36' with 7.5" Tine Spacing. S45. TA937451. $29,000<br />
GASON 1830RT 2 BIN GASON 1830 Rear Tow 2 Bin 4 Outlet Dual Front<br />
Castor Wheels. S27. TA598908.<br />
$33,000 Incl.Gst<br />
HARVESTING<br />
Gleaner R60 30 Front $20,000<br />
TRUCKS<br />
Mercedes Benz 2222<br />
prime mover with 30 Ft flat top trailer<br />
converted to tipper $20,000<br />
Mercedes Benz 1418<br />
single drive with page and page<br />
pusher axle $10,000<br />
A RANGE OF NEW 8" AND 10"<br />
GRAIN LINE AUGERS AVAILABLE<br />
FFM-TV-M-5114257-A<br />
CASE IH 4430 PATRIOT SPRAYER 2012, with Aim Command, 6000 litre tank, 36.5 metre 7<br />
section boom, auto steer with a Nav controller & 372 receiver, 13.6R42 tyres, boom prime &<br />
flush, hyd. banjo fill pump, has been workshop checked & serviced. S195. TA900768.<br />
$242,000<br />
COMBINES<br />
Case IH 8120, 2009 build, duals, chopper, 40’ Case IH 2152<br />
draper levelling wheels, 2412 s/hrs pre season serviced ...................... $231,000<br />
Case IH 2388, 2000 build 36’ 1052 c/w cross auger 3120 s/hrs ............ $82,500<br />
Gleaner R75, 1500 s/hrs with 1 season old 35’ Agco 9250 Dyna<br />
Flex draper front, very tidy machine ..................................................... $165,000<br />
HAY<br />
Case IH SB541 Small Square Baler, 2009 build, one owner, good<br />
condition, coming in ............................................................................... $26,400<br />
Case IH RB464 Round Baler, 2009 build, approx. 19,000 bales, 6’<br />
x 4’ variable chamber, net, one owner, coming in ................................... $30,800<br />
Kuhn FC4060 TCS, 2015, 4 metre cut, steel on steel rollers,<br />
available Sept 20 ................................................................................... $44,000<br />
Kverneland Taarup 9063C Twin Rotor Rake, 6.3m work width,<br />
central delivery, coming in ..................................................................... $15,400<br />
SPRAYERS<br />
Hardi navigator 5030, 2003 build, 30 metre Eagle boom, 5500<br />
controller, Granni Pot, 18.4 x 38 tyres $22,000<br />
Hardi 5036 Commander S, 2004 build, 5500 controller, 18.4 x 38<br />
tyres, 36 metre Force boom, Granni pot, as is $22,000<br />
Croplands Pegasus, 30 metre boom, Eagle controller, 4 sections,<br />
18.4 x 38 tyres $22,000<br />
TRACTORS<br />
Case IH 9350 Steiger, 24.5 x 32 duals, 24 x 6 trans, 4500 hours ............ $66,000<br />
Case IH CS75, 1999 build, 2800 hours, 2006 Burder loader with<br />
bucket & hay forks ................................................................................. $26,400<br />
Case IH CVX 150 tractor, 20.8x42 r/tyres, Vision Lift 65 loader, 6505 hrs $55,000<br />
Case IH CVX170, 2003 build, 5800 hours, 50km/h trans, front<br />
susp, cab susp, 4 speed<br />
PTO, 4 remotes, Challenge CL421X loader, bucket, 540/80R38 &<br />
440/80R28 industrial tyres .................................................................... $69,300<br />
McCormick MTX175 tractor, 650,65R42 rear 540/65R30 front<br />
tyres, recently replaced, 3pl, f/susp, Trima 585 loader with<br />
bucket, 6300 hrs, 173 hp ....................................................................... $68,750<br />
FFM-TV-5012485-A<br />
CASE CASE PUMA 165 WITH CASE LSX PRO<br />
LOADER<br />
165hp, one owner tractor in good condition.<br />
S36. TA1015637.<br />
POA<br />
TRACTORS<br />
FENDT 410 VARIO 100 HP VERY ORIGINAL excellent condition ................................................................ POA<br />
MASSEY FERGUSON 7615 VARIO 140 hp one owner excellent condition ................................................ POA<br />
MASSEY FERGUSON 7475 VARIO 135 HP LOADER READY one owner top condition ............................... POA<br />
VALTRA T161 160 H.P.FWA ONE OWNER air front suspension, electro hyds ............................................ POA<br />
JOHN DEERE 9200 ARTICULATED 310 HP lower hours excellent condition ............................................. POA<br />
CASE PUMA 165 LSX F.E.LOADER 165 HP one owner .............................................................................. POA<br />
NEW HOLLAND 8560 160HP Front linkage and pto a/c cab fwa ............................................................. POA<br />
MASSEY FERGUSON 5465 110 H.P. FWA A/C CAB one owner tractor ...................................................... POA<br />
VALTRA 6350 90 HP cab F/E loader FWA one owner tractor .................................................................. POA<br />
MASSEY FERGUSON 6445 90 HP A/C Cab One owner tractor in excellent condition .............................. POA<br />
CASE MXM 175 177 HP FWA POWERSHIFT one owner ........................................................................... POA<br />
CASE MX 120 A/C CAB 120 HP FWA ........................................................................................................ POA<br />
MASSEY FERGUSON 6265 105hp FWA A/C Cab Burder Loader ............................................................. POA<br />
MF390 85HP Loader 4WD Shuttle Shift .................................................................................................. POA<br />
DEUTZ AGROTRON 90 MK3 90HP FWA A/C cab and F.E.Loader ............................................................... POA<br />
MF590 80HP, A/C cab, engine rebuilt ...................................................................................................... POA<br />
ISEKI SX 75 A/C cab, FWA, linkage one owner ........................................................................................ POA<br />
MF 394-4 Orchard Tractor, 80HP, Konig A/C cab ..................................................................................... POA<br />
INTER 484 ROPS frame, 2WD, remotes .................................................................................................. POA<br />
DAVID BROWN 880 with F/E loader ........................................................................................................ POA<br />
MASSEY FERGUSON 6150 95 HP A/C Cab Front end loader ................................. Going through workshop<br />
MASSEY FERGUSON 3070 95 HP A/C Cab Front end loader ................................... Going through workshop<br />
WINDROWERS<br />
NEW HOLLAND SP H8080 15FT ROTARY MOWER CONDITIONER FRONT AND 25FT DRAPER FRONT ....... POA<br />
ROUND BALER<br />
WELGER 445 5X4 ROTOR FEED AND KNIVES LATE MODEL BALER ........................................................... POA<br />
WELGER 520 6X4 ROTOR FEED AND KNIVES GOOD BALER ...................................................................... POA<br />
WELGER 535 6X4 ONE OWNER ............................................................................................................... POA<br />
CASE 528 5X4 rotor feed net wrap and knives........................................................................................ POA<br />
CASE 628 6X4 rotor feed net wrap .......................................................................................................... POA<br />
JOHN DEERE 535 6X5 baler has net ....................................................................................................... POA<br />
CLAAS 280 6x4 roto feed string and net ................................................................................................ POA<br />
JOHN DEERE 467 6x4 Round Baler roto feed and net ............................................................................ POA<br />
CLAAS 280, 6x4 roto cut, string and net ................................................................................................. POA<br />
GRASSLANDS, 6x4 Silage Baler, wide pick up ........................................................................................POA<br />
JD 590, 6x4 Round Baler, going through workshop ............................................................................... POA<br />
MOWERS<br />
TAARUP 2832F 3.2MT FRONT MOUNT DISC MOWER late model ............................................................. POA<br />
CLAAS 260 DISCO disc mower going through workshop ....................................................................... POA<br />
TAARUP 2028 7 disc mower .................................................................................................................... POA<br />
MOWER CONDITIONER<br />
MASSEY FERGUSON 1372 12 FT STEEL ROLLERS CENTRE SWING ...............................................Coming in<br />
MASSEY FERGUSON 1345 12 FT STEEL ROLLERS CENTRE SWING ................................................Coming in<br />
LELY PC 370 RS 3.7 MT STEEL ROLLERS CENTRE SWING late model ..................................................... POA<br />
TAARUP 4236CT 3.5 MTR tyne conditioner late model one owner .......................................................... POA<br />
KUHN 350G 3.5 MTR steel flail conditioner, swivel hitch ........................................................................ POA<br />
TAARUP 4036 3.5 MTR flail mower conditioner one owner ..................................................................... POA<br />
VICON EXTRA 632T 3 mtr fiail mower conditioner linkage mount ........................................................... POA<br />
TAARUP 307 3.2 MTR flail mower conditioner......................................................................................... POA<br />
HAY RAKES<br />
GENDORE 6500 6.5 twin rotor rotary rake .............................................................................................. POA<br />
KUHN GA 7301 7.5 mt twin rotor rotary rake .......................................................................................... POA<br />
TEDDER<br />
CLAAS 52 5.2 mt 4 rotor hydraulic fold ................................................................................................... POA<br />
SQUARE BALERS<br />
MASSEY FERGUSON 190 4X4 going through workshop has 2190 crank and reduced height chamber. .........POA<br />
NEW HOLLAND 1210 3x4 Square Bale ................................................................................................... POA<br />
MF 185 3x3 Square Baler ....................................................................................................................... POA<br />
CASE 8580, 4x4 Square Baler ................................................................................................................ POA<br />
CASE 8570 3x3 Square Baler ................................................................................................................. POA<br />
FFM-TV-NMAI-5012666-A
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 83<br />
Hado Pty Ltd ATF Intersales Unit Trust<br />
ABN 64 160 069 925 / ACN 001373 726<br />
80 Hoskins St, PO Box 178, Temora NSW 2666<br />
Ph: 02 6977 1933<br />
270-272 Hammond Ave, Wagga Wagga NSW 2650<br />
Ph: 02 6951 5515<br />
8-14 Oakes Road, Griffith NSW 2680<br />
Ph: 02 6962 6831<br />
www.intersales.com.au - admin.temora@intersales.com.au<br />
CASE IH 4430 Aim Pro<br />
2016, Case IH 4430 Aim Command pro, 6000l 36.5 MT, approx.1600 eng hrs, 700 spray<br />
hrs, 480/80r42 tyres and guards 50%, auto fold and height control, RTX 372 receiver,<br />
Nav, Pro 700 auto steer, 5 height sensors, auto grease, rev camera, Chemical inductor,<br />
Chem Vac, O/S sign, boom recirculation and flush system fitted, electronic tank gauge,<br />
$451,000 inc GST. waera. TA1034777.<br />
$451,000<br />
CASE IH 4430 aim command pro<br />
2016, Case IH 4430 Aim Command pro, 6000l 36.5 MT, approx. 2200 eng hrs,<br />
480/80r42 tyres and guards 30%, auto fold and height control, RTX 372 receiver, Nav,<br />
Pro 700 auto steer, 5 height sensors, auto grease, rev camera, Chemical inductor,<br />
Chem Vac, O/S sign, UHF, Radio, boom recirculation and flush system fitted,<br />
electronic tank gauge, front fill. book. TA1036995.<br />
$396,000<br />
CASE IH 8230 2012, 2683 eng/1662 rot hrs, 600/70R28, 900/60r32<br />
drive tyres, CD Radio/UHF, HID drive lights, bin covers, Nav, 372<br />
receiver, pro 700, auto steer, bin camera, full set concaves, Hid<br />
lights serviced. TA1037185. $242,000<br />
CASE IH 8230 2012, 1855 eng/1408 rot hrs, 2012 Case 2152 45ft<br />
front, 600/70R28, 900/60r32 drive tyres (85%), Chopper, CD<br />
Radio/UHF, HID drive lights, bin covers, 2012, Trailer, Nav, 372 RTX<br />
auto steer, bin camera very tidy condition. TA990324. $363,000<br />
MILLER NITRO 4365 with macdon adaptor 2011, 4365 sprayer,<br />
Approx. 3500hrs, 520/85r38 tyres 80%, 6000l tank, 30mt boom,<br />
mudguards, 3 sensor raven auto height control, triplet nozzles 25cm,<br />
7 section, auto grease, 50kmh, hydro transmission, Led under boom<br />
lights, 8.7lt Cummins eng, 365HP, Case XCN 2050 controller, Nav 11,<br />
auto section control with field IQ section control, Adaptor for MacDon<br />
draper. TA1036994. $231,000<br />
HARDI 5030 COMMANDER 2011, 5000l, 30mt SPC boom, hydraulic<br />
axle suspension, 18.4 x 38 tyres, Granni pot and Vac, electric end<br />
nozzles, electronic tank gauge, 6 section HC 5500 control, jobcom,<br />
inline filters, fill filter, end fence protectors NEW 363 PTO drive<br />
pump. Serviced as needed. TA357842. $35,200<br />
CASE IH 8230 2012, 8230 combine, 45ft 2152 draper front, trailer,<br />
3080 eng, 2235 rot hrs, dual 620/70r42 tyres 70%, 600/70r28 steer<br />
tyres 70%, chopper, Nav, 372, pro 700 auto steer, rev camera, led<br />
light bar, 4 axle Intersales trailer, front is windrower ready. TA991022.<br />
$297,000<br />
CASE IH 3152 3152 2015, 45 foot Draper Front, Excellent Condition.<br />
Top Cross Auger, Twin Feed Centre Mat, 45 Foot Comb Trailer ready<br />
To Go. 3 Season Old. Located In Griffith. TA1025219. $55,000<br />
CASE IH 8230 2013, 1358 eng, 1059 rot, 40ft 2152 draper front,<br />
trailer, 620/70R38 drive, 600/70r28 steer 70%, Nav, 372 RTK, pro<br />
700, folding grain tank extensions, radio, UHF, HID lights, cross<br />
auger, windrower ready, 4 axle dual purpose. TA990303. $429,000<br />
BOGBALLE EX TREND 2003, icon electronic controller auto rate<br />
controller, 1000l base with approx. 2800l extensions, cover tarp,<br />
hydraulic drive unit, storage stand, Intersales Temora. 9T heavy duty<br />
36 mt vanes for urea. TA900359. $13,200<br />
CASE IH 8120 8120 2011, Combine with 2010 Case Macdon 2152 45<br />
foot front & x auger and trailer. 620/70R72 Duals and 600/65r28 rear<br />
@ 40%. UHF and radio Rtx Guidance with 262 but RTK ready (needs<br />
radio). Fixed onloading auger and Manual Bin Extensions. Will be<br />
workshop inspected. Excellent Condition. Located In Griffith.<br />
TA1037216. $250,000<br />
CASE IH DCX101 Disc mower and conditioner. 3m cut (10 foot), 8<br />
cutting Discs, steel on steel rollers. Transport light kit, Hydraulic<br />
wheels, Draw bar Pull, 1000 rpm PTO drive. Located In Griffith.<br />
TA1038685. $16,500<br />
CASE IH 1015 1994, 13 ft. canola front, spring kit, raised windrower<br />
deflector, 70% belts, 2 axle suspension trailer with slide for easy<br />
loading and centre mount, lights, tidy unit. TA904481. $12,100<br />
BOGBALLE M2 PLUS 2018, 3300L BOGBALLE linage spreader, 9T<br />
vanes will do 36 mt Urea, PTO drive, hydraulic door actuators, Flip<br />
over cover tarp, extendable ladder, road lights, mudguards, sieves,<br />
easy calibration. TA900361. $24,200<br />
CASE IH MAGNUM 340 2018, ultimate spec magnum, Approx. 850<br />
hrs, new 480/80r50 rear duals, new 480/79r34 front tyres, linkage<br />
and quick hitch, 540/1000 pto, 4 remotes, 50 kmh 19 speed<br />
transmission, cab and front axle suspension. Pro 700, nav, 372<br />
receiver, auto steer, factory red care warranty till June 2021.<br />
TA1037182. $308,000<br />
DUAL KIT 2016, Dual kit to suit John Deere or Case IH / New Holland<br />
combine. IF 520/85r42 firestone tyres 80%, Rims and spacers /<br />
hardware. TA922637. $11,000<br />
CLIP ON DUALS 18.4 x 42/ 480/80R42 clip on duals to suit 32" rim,<br />
matches up to 900/65r32 header tyres, 12 x rods and eyes supplied<br />
Case, John Deere, New Holland etc. TA922636. $9,900<br />
FLEXI COIL PD5700/3850 PD5700/3850 2012, Parallellogram<br />
Precision Hoe Drill 60' (18.3mt) Width in 5 sections 12" spacings on<br />
3 ranks, 5.6mt transport width 60 row units - Double shoot opener,<br />
Smooth profile packing wheel, individual depth control and fully<br />
adjustable breakout (275-55lb) from the cab seat Seeder is matched<br />
up with a Flexicoil 3850 tow behind Air Cart 3 bin 380bu Capacity<br />
(13,400lt) Split in litres 4,150/3,300/5950 Flexcontrol IV 254mm (10")<br />
Load/unload auger. TA1029421. $220,000<br />
FFM-FP--5011483-D
4/3/20, 2:48 pm<br />
Page 1 of 1<br />
4/3/20, 2:48 pm<br />
Page 1 of 1<br />
SEARCH<br />
NEW AND USED TRACTORS FOR SALE IN<br />
AUSTRALIA BAUER TRADER MEDIA<br />
Find new and used Tractors for sale with <strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong><br />
magazine<br />
NEXT<br />
SEARCH<br />
Page 1 of 188 (1,875 results)<br />
Sort by Premium Ads<br />
list map<br />
NEW AND USED TRACTORS FOR SALE IN<br />
AUSTRALIA<br />
Find new and used Tractors for GET sale ALERTS<br />
with <strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong><br />
magazine<br />
CASE IH MAXXFARM 25 TRACTOR NEXT<br />
$19,750<br />
Page 1 of 188 (1,875 results)<br />
Sort by Premium Ads<br />
list map<br />
GET ALERTS<br />
CASE IH MAXXFARM 25 TRACTOR<br />
$19,750<br />
Mclaren Vale, SA<br />
Tractors / Tractors / 0-40hp ! CALL 08 7007 6847<br />
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD<br />
FEL: YES Rated Engine SAVE Power - ITEM hp: 28<br />
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380<br />
hours indicated, with books, approximately 28 horsepower, AS NEW *price<br />
includes gst<br />
EMAIL SELLER<br />
Mclaren Vale, SA<br />
KUBOTA 8540<br />
! CALL 08 7007 6847<br />
$22,000<br />
SAVE ITEM<br />
EMAIL SELLER<br />
KUBOTA 8540<br />
$22,000<br />
BAUER TRADER MEDIA<br />
Tractors / Tractors / 0-40hp<br />
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD<br />
FEL: YES Rated Engine Power - hp: 28<br />
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380<br />
hours indicated, with books, approximately 28 horsepower, AS NEW *price<br />
includes gst<br />
Tractors / Tractors / 40-100hp<br />
RefCode: TA994405 Class: 40-100hp Drive Type: FWA<br />
Number Cylinders/cc: 4 Rated Engine Power - hp: 85<br />
Usage Hours: 5,800<br />
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives<br />
very well. Xgoverment . Inspection most welcome<br />
Stonyford, VIC<br />
Tractors / Tractors / 40-100hp<br />
! CALL 03 8547 8644<br />
>> TESTED<br />
$24,750 $160,000<br />
$199,980 $50,000<br />
CASE IH 695XL. 70hp, Cabin, Challenge 349E<br />
front end loader + more • NSW 0429 467 147<br />
Serafin <strong>Machinery</strong> brings Czech manufacturer<br />
<strong>Farm</strong>et’s range of deep and disc cultivators to<br />
the local market >> Page 14<br />
2016 GVM Mako. Spra coupe, 2vm boom,<br />
1500L tank. • NSW 0488 442 372<br />
SPRAYERS<br />
8 PAGE SPECIAL FEATURE<br />
2018 New Holland T7-260. 220hp, L4500<br />
loader + much more • VIC 0402 851 544<br />
items for sale<br />
in print & online<br />
Issue 382 > $7.95 > On sale 27/02/20<br />
2017 Kioti RX8030SP. ROPS, Loader & 4in1,<br />
had only light work • QLD 0437 113 771<br />
4x4s now for sale!<br />
84 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
Rocky River Ag Services<br />
CRYSTAL BROOK SA<br />
Ph 08 8636 2772<br />
Sales, Service & Parts<br />
ABN: 961 614 184 01<br />
lsmart@rockyriverag.com.au<br />
www.rockyriverag.com.au<br />
FLEXI COIL 4350<br />
Flexi-Coil 4350 TBH Trike Air Cart, 3 bin, 15,000Lt, good condition.<br />
51098. TA1038851.<br />
$92,400<br />
CASE IH 4420<br />
c/w Aim Command, PRO600 monitor, Accuguide complete HP<br />
enabled, 36m boom, auto section control, auto height control, 3" fill<br />
pump, auto fold, 380/90R46 tyres, good condition. 50989. TA889124.<br />
$269,500<br />
EZEE-ON 4590<br />
Ezee On 4590 Offset Disc, 32ft, very good condition.<br />
51088. TA1038852.<br />
$42,900<br />
CASE IH MAGNUM 200<br />
c/w 3PL, CVT Transmission, 4 remote outlets, 860 eng hrs, 2016<br />
model, excellent condition. 51012. TA931820.<br />
$189,200<br />
NEW HOLLAND BB940<br />
Square Baler, 2005 model, c/w Lincoln auto greaser, chain oiler,<br />
good condition.<br />
51075. TA1038853.<br />
$25,300<br />
CASE IH 7140<br />
Axial Flow Combine, c/w 3152 40ft Draper Front, rocktrap, straw<br />
chopper, PRO700, NAV & Receiver, only 515 rotor hours, 2016<br />
model, very good condition. 51074. TA1008189.<br />
$434,500<br />
Brad Page 0428 833 193 • Rob Dingle 0428 859 409 • David Cliff 0427 859 960 • Lynton Smart 0427 859 967<br />
FFM-HH-5012302-A<br />
Powered by<br />
RESEARCH • COMPARE • BUY • SELL<br />
AUSTRALIA’S #1<br />
FARM MACHINERY MARKETPLACE *<br />
BUY<br />
More than 40,000 tractors,<br />
spreaders, harvesters, hay tools,<br />
feeders, sprayers, trailers, and<br />
attachments, and other parts and<br />
accessories currently listed for sale<br />
SELL<br />
Unlimited<br />
stock listings on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
for just<br />
$360 per month<br />
Tractors, farm machinery & materials handling equipment for sale<br />
Four High, Two Tonne<br />
Tobroco Giant 6004 Loader<br />
Off the Chain<br />
Hustler’s Chainless LX104 Bale Feeder<br />
Fully Charged<br />
Ram 1500 Laramie V6 Ecodiesel<br />
www.Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
,!3BD0A6-aaejdg!:K;N<br />
Czech<br />
44,480+<br />
MATE<br />
Trucks, utes and<br />
8,340+<br />
* Based on stock items for sale as at March 2020
ISSUE 327<br />
Forklifts, Machine Tools, Pumps, Generators & Industrial Equipment<br />
Expanding<br />
IN PARTS<br />
Growth and expansion means Bapcor must<br />
consolidate its facilities in particular states.<br />
Full story at TradePlantEquipment.com.au<br />
$10,000 + GST<br />
Nakayama Feeder Crusher.<br />
9ft x 30 inch, unused • QLD 0427 775 466<br />
$500,000 + GST<br />
Kue Ken 48x36 Jaw Crusher. On stand with feeder &<br />
scapler, refurbished. • QLD 0427 775 466<br />
$875,000 + GST<br />
Skid based Crushing Plant 42x27. Brown Lenox Jaw,<br />
1600 Kawasaki Gyro, Allis screen • QLD 0427 775 466<br />
23,540+ items for sale in print & online
86 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
20.0hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
27.4hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
41.9hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
PERKINS 403D-11 3 cylinder water cooled diesel<br />
20.0HP continuous at 3000 RPM. S279. TA849922. POA<br />
PERKINS 403D-15 3 cylinder water cooled diesel<br />
27.4HP continuous at 3000 RPM. S268. TA819609. POA<br />
PERKINS 404D-22 4 cyclinder diesel engine 41.9hp<br />
continuous at 3000 RPM. S79. TA682093.<br />
POA<br />
The Heart Of Every Great Machine<br />
Get The Perkins App<br />
The Heart Of Every Great Machine<br />
46.0hp<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
Engine Manuals<br />
Spare Parts<br />
Servicing Schedules<br />
Assembly Diagrams<br />
71.0hp<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
PERKINS 404D-22T IOPU, 46HP continuous at 2800<br />
RPM. 404D-22T. TA382550.<br />
POA<br />
90.4hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
PERKINS 1104A-44T 4 cylinder turbo water cooled,<br />
90.4HP continuous at 2400 RPM. S115. TA682099. POA<br />
All Your<br />
Perkins Engine<br />
Information At<br />
Your Finger Tips<br />
Will Work In<br />
Conjuction<br />
With The<br />
Perkins<br />
Smart Cap<br />
WORKING SMARTER<br />
PERKINS APP Download the app for all your Perkins<br />
engine information. S278. TA849858.<br />
POA<br />
PERKINS 1104A-44 4 cylinder water cooled diesel,<br />
71HP continuous at 2400 RPM. S99. TA682096. POA<br />
104.0hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
PERKINS 1104C-44TA Power Pack 104 hp continuous at<br />
2200 RPM. S284. TA850398. POA<br />
110.6hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
169.9hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
engines<br />
and<br />
Spare Parts<br />
218.9hp<br />
The Heart Of Every Great Machine<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
PERKINS 1104D-E44TA Electronic Power Pack 110.6 hp<br />
continuous at 2200 RPM. S283. TA850394.<br />
POA<br />
PERKINS 1106C-70TA mechanical models to 169.9 hp<br />
continuous at 2200 RPM available. S285. TA850401. POA<br />
PERKINS 1106D-E70TA Power Pack electronic 218.9 hp<br />
continuous at 2200 RPM. S286. TA850403.<br />
POA<br />
Reliable Pumping Solutions<br />
Reliable Pumping Solutions<br />
Reliable Pumping Solutions<br />
415.0hp<br />
450.0hp<br />
600.0hp<br />
New<br />
Model<br />
PERKINS 2206D-E13TA 6 Cylinder turbo aftercooled<br />
415hp continuous. S497. TA1008838.<br />
POA<br />
New<br />
Model<br />
PERKINS 2506D-15TA 6 Cylinder turbo aftercooled<br />
450hp continuous. S498. TA1008840.<br />
POA<br />
New<br />
Model<br />
PERKINS 2806D-E18TA 6 Cylinder turbo aftercooled<br />
600hp continuous. S499. TA1008841.<br />
POA<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
THE HEART OF EVERY<br />
GREAT MACHINE<br />
THE HEART OF EVERY<br />
GREAT MACHINE<br />
Dealer<br />
PET-FP-5013449-E
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 87<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
POWERING AUSTRALIA<br />
POWERING AUSTRALIA<br />
POWERING AUSTRALIA<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
KUBOTA D905-PP 3 cylinder power pack 17hp<br />
continuous at 3000.. S445. TA978449.<br />
POA<br />
KUBOTA D1105 3 cylinder power pack 22HP at 3000<br />
RPM continuous. D1105-PP. TA606122.<br />
POA<br />
KUBOTA V1505 4 cylinder diesel engine power pack,<br />
29HP at 3000 RPM continuous. V-1505-PP. TA606123. POA<br />
POWERING AUSTRALIA<br />
POWERING AUSTRALIA<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
KUBOTA V2203 diesel power pack 40hp countinuous at<br />
2800 RPM. V2203-PP. TA606126. POA<br />
KUBOTA V2403-T 4 cylinder diesel power pack 48.0hp<br />
continuous at 2700 RPM. V2403-T. TA735673. POA<br />
POWERING AUSTRALIA<br />
POWERING AUSTRALIA<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
V3300T 72.1hp<br />
Also Available<br />
KUBOTA V3300 4 cylinder power pack 59.1hp<br />
continuous at 2600 RPM. S151. TA768924.<br />
POA<br />
KUBOTA REPOWER ENGINES FOR KUBOTA MACHINERY.<br />
S500. TA1011866. POA<br />
POWER PACK<br />
THE COMPLETE<br />
ENGINE PACKAGE<br />
V3800T 82.5hP<br />
Also Available<br />
KUBOTA V3800 4 cylinder power pack 68.5hp<br />
continuous at 2600 RPM. S149. TA768919.<br />
POA<br />
POWERING AUSTRALIA<br />
STATION<br />
WORKHORSE<br />
8 and 9.5hp<br />
Also Available<br />
POWERING AUSTRALIA<br />
STATION<br />
WORKHORSE<br />
12.5 and 14.0hp<br />
Also Available<br />
POWERING AUSTRALIA<br />
Shaft Options<br />
Available<br />
OC95 9.5hp<br />
Also Available<br />
KUBOTA RK70 single cylinder diesel engine 6hp<br />
continuous at 2200 RPM. RK70. TA735676.<br />
POA<br />
KUBOTA RT100 single cylinder 9.0hp continuous at<br />
2400 RPM. S418. TA939037. POA<br />
KUBOTA OC60DI-QXL 6.0hp at 3600 rpm single cylinder<br />
air/oil cooled diesel. S147. TA754810.<br />
POA<br />
POWERING AUSTRALIA<br />
Generators<br />
POWERING AUSTRALIA<br />
Generators<br />
POWERING AUSTRALIA<br />
Generators<br />
12 kVA Single Phase<br />
10 kVA Three Phase<br />
Also Available<br />
KUBOTA J108-AUS 8.0kVa, single phase. Partially<br />
enclosed. J108. DPLIn13526.<br />
POA<br />
12.5 kVA Single Phase<br />
23.0 kVA Single Phase<br />
12.5 kVA Three Phase<br />
18.0 kVA Three Phase<br />
30.0 kVA Three Phase<br />
Also Available<br />
KUBOTA KJ-T130DX 12.5 kVA enclosed. Three phase<br />
with outlets. KJ-T130DX. TA556703.<br />
POA<br />
11.2 kVA Single Phase<br />
15.0 kVA Single Phase<br />
14.0 kVA Three Phase<br />
30.0 kVA Three Phase<br />
Also Available<br />
KUBOTA SQ3200 20.0kVa, three phase Fully enclosed<br />
silent pack. SQ3200. TA63983.<br />
POA<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
Powering Australia<br />
Powering Australia<br />
PET-FP-5013449-A
88 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
4.8hp<br />
Genuine<br />
Engines<br />
and<br />
Spare Parts<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD225 single cylinder, air cooled diesel engine<br />
4.8hp at 3600 RPM. KD225. TA728772.<br />
POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
6.7hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD350 single cylinder, air cooled diesel engine<br />
6.7hp at 3600 RPM. KD350. TA728773.<br />
POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
10.9hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD440 single cylinder, air cooled diesel engine<br />
10.9hp at 3600 RPM. KD440. TA728775.<br />
POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
18.8hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD425-2 Twin cylinder, air cooled diesel<br />
engine 18.8hp at 3600 RPM. KD425-2. TA728776. POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
23.1hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD477-2 Twin cylinder, air cooled diesel<br />
engine 23.1hp at 3600 RPM. KD477-2. TA728777. POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
28.5hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD625-2 Twin cylinder, diesel engine 28.5hp at<br />
3000 RPM. Electric start. KD625-2. TA728778. POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
42.0hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KD626-3 Three cylinder, diesel engine 42.0hp<br />
at 3000 RPM. Electric start. KD626-3. TA728779. POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
14.2hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KDW702 2 cylinder water cooled diesel, 14.2<br />
hp continuous at 3600 RPM. s112. TA682436. POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
34.0hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KDW1603 3 cylinder water cooled diesel, 34 hp<br />
continuous at 3000 RPM. S113. TA682440.<br />
POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
44.1hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KDW2204 4 cylinder water-cooled 44.1 hp<br />
continuous at 3000 RPM. KDW2204. TA694334. POA<br />
KOHLER ENGINES<br />
Relentless Power-Legendary Performance<br />
54.5hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KDW2204T 4 cylinder water-cooled turbo 54.5<br />
hp continuous at 3000 RPM. KDW2204T. TA694337. POA<br />
KOHLER ENGINES<br />
Forging The Future<br />
37.8hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER KDI1903M 3 cylinder power pack engine<br />
37.8hp continuous at 2600 RPM. S131. TA747914. POA<br />
KOHLER ENGINES<br />
Forging The Future<br />
44.6hp<br />
3 YEAR<br />
WARRANTY<br />
KOHLER ENGINES<br />
Kohler Petrol Engines 6 to 14hp<br />
KOHLER<br />
PETROL<br />
Kohler Command V-Twin Petrol<br />
KOHLER<br />
KOHLER KDI2504M 4 cylinder power pack engine<br />
44.6hp continuous at 2600 RPM. S132. TA747916. POA<br />
KOHLER CH395 single cylinder petrol engine 9.5 hp<br />
available in recoil or electric start. CH395. TA729062. POA<br />
KOHLER PETROL Auger engines. S288. TA855711.<br />
POA<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
PET-FP-5013449-C
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 89<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
Pump Power<br />
Pump Power<br />
BF6M1015C 366.0hp<br />
BF6M1015CP 402.0hp<br />
DRIVE<br />
JUST<br />
GOT<br />
BIGGER<br />
DRIVE<br />
JUST<br />
GOT<br />
BIGGER<br />
DEUTZ BF6M1015C 6 cylinder water cooled turbo 366.0<br />
hp continuous at 2100 rpm. S438. TA942887. POA<br />
Deutz Drive The No1 Choice<br />
DEUTZ THE ENGINE COMPANY WE LOVE ENGINES. S415.<br />
TA910955.<br />
POA<br />
Deutz Drive The No1 Choice<br />
DEUTZ BF6M1015CP 6 cylinder water cooled 402.0 hp<br />
continuous at 2100 rpm. S436. TA942844.<br />
POA<br />
Deutz Drive The No1 Choice<br />
F2L2011 29.6hp<br />
F3L2011 46.2hp<br />
F4L2011 61.7hp<br />
BF4L2011 74.9hp<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ F2L2011 2 cylinder diesel engine, 29.6HP<br />
continuous at 2800 RPM. S69. TA631651.<br />
POA<br />
DEUTZ<br />
The engine Company<br />
DEUTZ F3L2011 3 cylinder diesel engine, 46.2HP<br />
continuous at 2800 RPM. F3L2011. TA614111. POA<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ F4L2011 4 cylinder diesel engine, 61.7HP at<br />
2800 RPM continuous. F4L2011. TA614113. POA<br />
Deutz Drive The No1 Choice<br />
Deutz Drive The No1 Choice<br />
Deutz Drive The No1 Choice<br />
F3L914 55.1hp<br />
F4L914 73.4hp<br />
F6L914 110.8hp<br />
BF4L914 95.2hp<br />
BF6L914 155.0hp<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ F3L914 3 CYLINDER AIR COOLED 55.1hp<br />
CONTINUOUS AT 2300rpm. S440. TA944732. POA<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ BF4L914 4 cylinder air cooled turbo charged<br />
95.2hp continuous at 2300 RPM. S138. TA752454. POA<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ F6L914 6 cylinder air cooled diesel 110.8hp<br />
continuous at 2300 RPM. S140. TA752462.<br />
POA<br />
Deutz Drive The No1 Choice<br />
Deutz Drive The No1 Choice<br />
Deutz Drive The No1 Choice<br />
BF4M1013E 108.6hp<br />
BF4M1013EC 132.1hp<br />
BF6M1013EC 193hp<br />
BF6M1013E 164.9hp<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ BF4M1013E water cooled Deutz diesel engine<br />
108.6hp continuous at 2300 rpm. S133. TA752079. POA<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ BF6M1013EC water cooled Deutz diesel engine<br />
193.0hp continuous at 2300 RPM. S136. TA752090. POA<br />
DEUTZ<br />
The Engine Company<br />
DEUTZ BF6M1013E water cooled Deutz diesel engine<br />
164.9hp continuous at 2300 rpm. S135. TA752087. POA<br />
STAY POWERED WITH DEUTZ<br />
Available kVA:<br />
13-21-33-44-62<br />
81-110-140-170<br />
190-220-275-350<br />
380-415-480-55<br />
STAY POWERED WITH DEUTZ<br />
Available kVA:<br />
13-21-33-44-62<br />
81-110-140-170<br />
190-220-275-350<br />
380-415-480-550<br />
STAY POWERED WITH DEUTZ<br />
Available kVA:<br />
13-21-33-44-62<br />
81-110-140-170<br />
190-220-275-350<br />
380-415-480-550<br />
DEUTZ DPS33 30.0 kVA Deutz 3 phase generator set in<br />
canopy. S405. TA910919.<br />
POA<br />
DEUTZ DPS44 40.0 kVA Deutz 3 phase generator set in<br />
canopy. S406. TA910921.<br />
POA<br />
DEUTZ DPS62 60.0 kVA Deutz 3 phase generator set in<br />
canopy. S407. TA910922.<br />
POA<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
Phone: 07 3640 9400<br />
Email: Phone: info@dieselparts.com.au<br />
07 3640 9400<br />
PET-FP-5013449-B
90 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
21 HILDA STREET HAMILTON. QLD. 4007<br />
www.dieselparts.com.au<br />
HATZ<br />
Creating Power Solutions<br />
4.2hp<br />
HATZ<br />
Creating Power Solutions<br />
6.1hp<br />
HATZ<br />
Creating Power Solutions<br />
9.0hp<br />
HATZ<br />
DIESEL<br />
HATZ 1B20 single cylinder 4.2hp continuous at 3600<br />
rpm. S210. TA796088.<br />
POA<br />
DIESEL<br />
HATZ 1B30 single cylinder 6.1hp continuous at 3600<br />
RPM. S211. TA796089.<br />
POA<br />
DIESEL<br />
HATZ 1B40 single cylinder 9.0hp continuous at 3600<br />
rpm. S212. TA796090.<br />
POA<br />
HATZ<br />
Creating Power Solutions<br />
9.7hp<br />
HATZ<br />
Revolutionary Technology<br />
8.6hp<br />
HATZ<br />
Revolutionary Technology<br />
9.2hp<br />
DIESEL<br />
HATZ 1B50 single cylinder 9.7hp continuous at 3600<br />
RPM. S213. TA796091.<br />
POA<br />
DIESEL<br />
HATZ 1D42Z single cylinder 8.6hp continuous at 3600<br />
RPM. S214. TA796092.<br />
POA<br />
DIESEL<br />
HATZ 1D50Z single cylinder 9.2hp continuous at 3600<br />
RPM. S215. TA796093.<br />
POA<br />
Revolutionary Technology<br />
Revolutionary Technology<br />
2 Cylinder Power Package<br />
HATZ<br />
12.6hp<br />
HATZ<br />
13.9hp<br />
HATZ<br />
18.6hp<br />
DIESEL<br />
HATZ 1D81Z Single cylinder air cooled diesel engine,<br />
12.6HP continuous at 3000 RPM. 1D81Z. TA614118. POA<br />
DIESEL<br />
HATZ 1D90Z single cylinder 13.9hp continuous at 3000<br />
RPM. S216. TA796094.<br />
POA<br />
DIESEL<br />
HATZ 2G40 2 cylinder air cooled diesel engine, 18.6HP<br />
continuous at 3000 RPM. s100. TA682431.<br />
POA<br />
Ready to Use All The Time<br />
Ready To Use All The Time<br />
Ready To Use All The Time<br />
HATZ<br />
32.2hp<br />
HATZ<br />
48.7hp<br />
HATZ<br />
65.0hp<br />
DIESEL<br />
HATZ 2M41Z Air-cooled 2 cylinder diesel engine 32.2hp<br />
continuous at 3000 RPM. 2M41Z. TA694324. POA<br />
DIESEL<br />
HATZ 3M41Z Air cooled 3 cylinder diesel engine 48.7HP<br />
continuous at 3000 RPM. 3M41Z. TA694330. POA<br />
DIESEL<br />
HATZ 4M41Z Air-cooled 4 cylinder diesel engine 65.0hp<br />
continuous at 3000 RPM. 4M41Z. TA694331. POA<br />
Hatz Powered Pumpsets<br />
Hatz Powered Generators<br />
The All New Generation H50<br />
HATZ<br />
HATZ<br />
HATZ<br />
DIESEL<br />
HATZ POWERED PUMPSETS TO YOUR REQUIREMENTS.<br />
S433. TA941035. POA<br />
HATZ POWERED GENERATORS. S434. TA941040.<br />
DIESEL<br />
POA<br />
DIESEL<br />
HATZ 4H50TI 4 Cylinder water-cooled 74.8hp at 3000<br />
RPM power pack unit. S227. TA808826.<br />
POA<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
Phone: 07 3640 9400<br />
Email: info@dieselparts.com.au<br />
CREATING POWER SOLUTIONS.<br />
CREATING POWER SOLUTIONS.<br />
PET-FP-5013449-D
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 91<br />
Titan ER30<br />
Wheel Loader<br />
$39,900 inc GST<br />
Features:<br />
Rated 3000kg operating<br />
125Hp Turbo Diesel Motor<br />
4400mm lift height<br />
4 Speed Powershift Transmission<br />
36km/h Road Speed<br />
2019 Henty<br />
<strong>Machinery</strong> Field Days<br />
MACHINE<br />
OF THEYEAR<br />
Nominee<br />
Standard Inclusions:<br />
Passive Boom Suspension<br />
Electronic Float Function<br />
Hydraulic Quick Hitch<br />
4 in 1 Bucket<br />
Pallet forks<br />
Spare Wheel<br />
Reverse Camera<br />
Air Conditioned / Heated ROPS Cabin<br />
The Titan product range is<br />
supported by the Titan Tough,<br />
2 Year / 2400 factory warranty<br />
Formerly Everun Australia<br />
Discover the strength of Titan today, and<br />
why we made the switch from Everun<br />
www.titanhi.com.au<br />
03 9786 6363
92 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES<br />
PTY LIMITED ABN 17 064 853 318<br />
2500KG Gas Forklift Hire From $100 Per Week<br />
TOYOTA 42-2TD25<br />
TOYOTA 42-2TD25 TOW TRACTOR<br />
K053. TA1026796.<br />
$35,200<br />
DIECI ET166<br />
Diesel Telehandler, 4000KG Lift Capacity, 1.6<br />
Metre Lift Height. K048. TA1028312.<br />
$60,500<br />
KOMATSU FG40ZT-7<br />
4000kg Capacity, 4500mm 2 Stage Mast, Side<br />
Shift, 6 Cylinder Nissan Motor, Auto, LPG, Solid<br />
Tyres, Full Lights Kit, Will Make A Great Work<br />
Horse. PRICE $23,000 + GST. A006. TA239035.<br />
$25,300<br />
TOYOTA 2TG10<br />
15000KG Towing Capacity, LPG, 3 Speed, Full<br />
Light Kit (Can be Registered), New Paint, Fully<br />
Serviced. E104. TA676799.<br />
$13,200<br />
JLG 4013<br />
2014, Diesel Telehandler, 13Metre Reach,<br />
4000KG Lift Capacity. K047. TA1028311.<br />
$66,000<br />
NISSAN CHM02L25U<br />
2500kg Capacity, 6000mm Three Stage Mast,<br />
Sideshift, Power Steer, Cushion Tyres, Full Lights<br />
Kit, Good Battery, Full Service. Price $12,000 plus<br />
GST. G021. TA54369.<br />
$13,200<br />
6 MARIEANNE PLACE, MINCHINBURY, NSW, 2770<br />
P: (02) 9832 9777 F: (02) 9832 9977<br />
E: aonefork@lifttrucks.com.au<br />
TOYOTA 02-2TD25<br />
TOYOTA 02-2TD25 TOW TRACTOR<br />
K054. TA1026804.<br />
$29,700<br />
KALMAR DC15-12<br />
Automatic Container Handler with 3.5 Metre 3<br />
Stage Mast, Side shift and 2.4 Metre long tynes.<br />
F092. TA769581.<br />
$77,000<br />
YALE MR14H<br />
YALE 1.4 TONNE ELECTRIC FORKLIFT WITH<br />
WEIGHT GAUGE<br />
K029. TA996840.<br />
$15,400<br />
USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777<br />
HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES<br />
PET-FP-5011641-A
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 93<br />
GOOD<br />
RUNNING<br />
CONDITION<br />
$39,000<br />
+GST<br />
UNDER<br />
$40,000<br />
+GST<br />
RUNS<br />
WELL<br />
RUNS<br />
WELL<br />
GOOD<br />
RUNNING<br />
CONDITION<br />
A Hand Sanitiser for Everyday Use...<br />
Keep everyone Safe and Clean<br />
99.9% germ killing power.<br />
75% Alcohol Volume<br />
Quick and convenient way to sanitise your hands<br />
on the go or on your job site.<br />
Order for your workplace today!<br />
Phone: 02 9666 6160 www.safeandcleanhands.com.au<br />
Safe & Clean<br />
Alcohol Based Hand Sanitiser<br />
PET-FP-5011670-CS-327
94 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
SKYJACK SJ3219 2012,<br />
19' Electric Scissorlifts, plenty to choose from. 227kg<br />
lift capacity all in good condition. In Brisbane, Sydney<br />
and Melbourne. Machines in test from Mar 2022 to<br />
April 2022. Various between S19538 - S19589.<br />
TA1019568.<br />
$4,000 + GST = $4,400<br />
GENIE S2632E<br />
26' Electric Narrow Scissorlifts. 2 machines offered both<br />
in test until Apr 2020. Machines located in Melbourne.<br />
S26248, S26249. TA1019577<br />
$8,000 + GST = $8,800<br />
SKYJACK SJ9250RT 2011,<br />
50' Rough Terrain 4WD Scissorlifts with self leveling<br />
outriggers and dual powered extension decks. 6<br />
machines in test from Oct 2021 up to Jun 2022. Located<br />
Bris, Syd & Melb S5008 - S5013. S5005 - S5013.<br />
TA1019562<br />
$30,000 + GST = $33,000<br />
GENIE Z34/22IC<br />
34’ 4WD diesel Knuckle Booms. 4 machines offered and<br />
all are in test until October 2020.<br />
Machines are located in Brisbane and Melbourne:<br />
KB3485, KB3486, KB3488 & KB3489.<br />
TA1038334.<br />
$22,000 + GST = $24,200<br />
JLG 450AJ 2011,<br />
45' 4wd diesel knuckle booms still in test until 02/21. 3<br />
units only, ex Brisbane & Mackay. KB45117G,<br />
KB45118G, KB45120G. TA952642<br />
$28,000 + GST = $30,800<br />
JLG 600AJ<br />
60’ 4WD diesel Knuckle Booms. 4 machines offered and<br />
all are equipped with 7kVa on-board generators. These<br />
machines are all in test from October 2021 until March<br />
2022 and are all located in our Melbourne Branch:<br />
KB6062, KB6063, KB6066 & KB6067.<br />
TA1033085.<br />
$40,000 + GST = $44,000<br />
GENIE S45<br />
45' telescopic Boomlifts. 7 machines offered and all but<br />
2 have on-board generators. In test from Feb 2022 until<br />
Jan 2023. Machines located in Brisbane, Sydney &<br />
Melbourne. Some of the machines are slightly cheaper.<br />
B45127 - B45133. TA1019573<br />
JLG B660SJ<br />
66' 4WD telescopic Boomlifts. 4 machines offered and 3<br />
equipped with 7kVa generators. In test from Apr 2022<br />
until Dec 2022. Located in Brisbane, Townsville & Dalby.<br />
B6625 - BB6628. TA1019572<br />
MERLO P38.13<br />
3.8 ton, 13.0 metre Telehandlers. 6 machines offered. In<br />
test from Nov 2021 until Feb 2022. Machines located in<br />
Sydney, Melbourne, Brisbane & Townsville. Some of the<br />
machines are slightly cheaper. T38131 - T38134,<br />
T381310 & T381311. TA1019584<br />
$50,000 + GST = $55,000<br />
0457 110 110<br />
sales@skyreach.com.au<br />
www.skyreach.com.au<br />
$50,000 + GST = $55,000<br />
$50,000 + GST = $55,000<br />
PET-FP-5126550-A
PET-FP-5211373-CS-318
96 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
WELDING EQUIPMENT<br />
LINCOLN 305D<br />
2009, Diesel<br />
Driven Welder,<br />
Generator.<br />
300amp DC<br />
multi-process<br />
$12,100<br />
LINCOLN<br />
VANTAGE 580<br />
ENGINE WELDER<br />
Multiple units fully<br />
tested, With<br />
warranty.<br />
$14,500<br />
SHINDAIWA<br />
DGW500<br />
Diesel Welder,<br />
Generator.<br />
$12,500 + GST<br />
LINCOLN<br />
VANTAGE 575<br />
DIESEL WELDER<br />
Diesel Welder,<br />
Generator.<br />
from $11,000 +<br />
GST<br />
LINCOLN AIR<br />
VANTAGE 500<br />
Diesel Welder,<br />
Generator,<br />
Compressor.<br />
$23,500 + GST<br />
MILLER AIRPAK<br />
Diesel Driven<br />
Welder, Generator,<br />
Compressor.<br />
$25,750 + GST<br />
OUR USED EQUIPMENT IS SOLD WITH A WARRANTY<br />
07 3375 4146<br />
1310 Boundary rd WACOL QLD 4076<br />
36 Carmel st Garbutt QLD 4814<br />
WE BUY WE OLD BUY CRANES<br />
OLD CRANES<br />
10 TONNE AND GREATER 10 TONNE CAPACITY AND GREATER | ALL CONDITIONS CAPACITY | CONSIDERED<br />
ALL CONDITIONS CONSIDERED<br />
We are an Australian We company are Australian who work company on<br />
who work on<br />
your behalf to get the your best behalf prices to from get the overseas<br />
best prices from overseas<br />
buyers.<br />
buyers.<br />
You deal with one You company deal with throughout one company the<br />
throughout the<br />
transaction so you dont transaction have to worry so you about dont have the<br />
to worry about the<br />
daunting export process.<br />
daunting export process.<br />
Please email details Please of email your crane details to:<br />
of your crane to:<br />
info@usedcrane.com.au info@usedcrane.com.au or call Dhruv on<br />
or call Dhruv on<br />
0411 034 788.<br />
0411 034 788.<br />
• Australian Company • Australian Exporting Company cranes since<br />
Exporting cranes since<br />
2006<br />
2006<br />
• Access to most markets • Access globally to most hence markets we<br />
globally hence we<br />
can offer good prices can for offer your good cranes.<br />
prices for your cranes.<br />
• Simple transaction • and Simple timely transaction payment<br />
and timely payment<br />
• No paperwork requirement • No paperwork from your requirement end so the<br />
from your end so the<br />
process is hassle free<br />
process is hassle free<br />
urce Australia Trade and Pty Outsource Ltd trading Australia as Used Pty Cranes Ltd trading Australia<br />
as Used Cranes Australia<br />
Solent Suite Circuit, 310, Norwest 11-13 Solent NSW Circuit, 2153<br />
Norwest NSW 2153<br />
60 + 61 2 9659 8861 1466 1660 + info@usedcrane.com.au 61 2 9659 1466 info@usedcrane.com.au www.usedcrane.com.au<br />
www.usedcrane.com.au
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 97<br />
www.flt.com.au FreeCall: 1800 688 788 Email: sales@FLT.com.au Contact: Michael Carlin 0418 299 555<br />
Stock located in Sydney, Brisbane, Melbourne, Perth<br />
OMEGA 54E DCH Stack 40,000kg 20 and 40<br />
foot containers 4 high. Has reach out, slew,<br />
sideshift. Air cab. Immediate delivery. R3496.<br />
TA737296.<br />
For Sale or Hire POA Freecall 1800 688 788<br />
KONECRANES SMV SL32-1200B 2011,<br />
Quality forklift can transport without need to<br />
dismantle. R3376. TA1038152.<br />
POA For Sale or Hire Ph:1800688788<br />
KALMAR DRT450 2013, Only 7411 hours with<br />
original Cummins engine. Stack 45,000kg 1st<br />
row 31,000kg 2nd row. Ready Now!. R3603.<br />
TA998021.<br />
POA For Sale or Hire Ph: 1800 688 788<br />
KALMAR DCF370-12 2012, 2 Available and a<br />
pair of DCF330-12. 2,440mm forks, sideshift,<br />
fork positioner. Option 20x40 spreader. Mine<br />
site spec. R3548. TA828696.<br />
For Sale or Hire POA Freecall: 1800688788<br />
HYSTER H32.00C Rated 29,000kg to stack 20'<br />
containers 4 high. Cummins 6CT diesel and<br />
Clark Hurth 32000 series powershift xmsn.<br />
R3332D. TA252516.<br />
Hire or Buy Ph: 1800 688788 $99,000<br />
HYSTER H18.00XM-12 2008, 18,000kg highcube 20'<br />
containers 3 high with 2440 forks + fork positioning<br />
sideshift. Option 14,000kg with ELME 558 Sidelift for 20'<br />
and 40' highcube. R3282. TA511086.<br />
For Sale or Hire POA $FreeCall 1800 688788<br />
OMEGA 36D 2010, stack highcube 20'<br />
containers 3 high. Enclosed air conditioned<br />
cab, excellent condition ready for delivery.<br />
R3467. TA737310.<br />
For Sale or Hire POA FreeCall 1800688788<br />
OMEGA 7ECH Twin Picks and stacks 20x40<br />
empty containers 7 high. Similar 5/6 high low<br />
hour Kalmars also in stock. R3355. TA400307.<br />
For Sale or Hire POA Ph 1800 688 788<br />
HYSTER H18.00XM-12 2008, Stacks highcube<br />
20' & 40' 4 high. ELME 558 20x40 spreader<br />
with top entry twistlocks. Front line unit ready<br />
for immediate delivery. R3547. TA829125.<br />
For Sale or Hire POA FreeCall 1800688788<br />
MOBICON 33T Load Unload up to 33,000kg<br />
20 and 40 foot shipping containers. For sale &<br />
Wanted. R3299. TA148664.<br />
For Sale or Hire Ph: 1800 688788 POA<br />
PRENTICE 7,000KG SWL Forklift ramp. Ideal<br />
for shipping containers for sale or hire. Ph:<br />
1800 688 788. R 3274. TA96974.<br />
$12,000 + GST = $13,200 For Sale or Hire<br />
www.FLT.com.au FreeCall: 1800 688 788<br />
HYSTER H32.00F Stacks 32,000kg 20'<br />
highcube containers 3 high. R 3389. TA394069.<br />
For Sale or Hire POA<br />
PET-FP-5011476-B
98 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
30 years<br />
Oliver Ph: 0475 633 959 | Andrew Ph: 0417 413 129<br />
Chemical Handling Technology and Equipment<br />
Fertiliser Application Systems, Pumps, Reels and Hose<br />
Retractable 12V Hose Reels 1 in. to 3 in.<br />
Honda Cast Iron Wet Seal Transfer pumps<br />
Swing Down Chemical Induction Hoppers<br />
Liquid Fertiliser BLOCKAGE MONITORING and Rate Control<br />
Exclusive Monitoring system for Air Drills and Planters<br />
Liquid Fertiliser Application Systems - Dual Metering Tube for<br />
Improved application range - Integration with all platforms<br />
Rate Control:<br />
• Maintain application rate<br />
• Input Prescription maps for variable<br />
rate application<br />
• Dry or liquid products<br />
• ISO BUS compatible<br />
CALL FOR MORE INFORMATION<br />
www.ajsmachinery.com.au
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 99<br />
DIESEL ENGINES Pty Ltd<br />
New and Used Diesel Engines and Generators<br />
Brett: 0408 781 735<br />
Sunny: 0418 781 835<br />
E-mail: sales@diesel-engine.com.au<br />
Address: 30 Paringa Road, Murarrie QLD 4172<br />
8-15KVA SINGLE PHASE<br />
SILENT GENERATORS - NEW<br />
30KVA 3 PHASE SILENT<br />
GENERATOR – NEW<br />
CUMMINS 4B3.9 27KVA –<br />
6LTAA8.9 250KVA<br />
CUMMINS 4BTA3.9G2 60KVA<br />
SILENT GENERATOR WITH<br />
STAMFORD ALTERNATOR -<br />
NEW<br />
CUMMINS 6BT5.9G2<br />
100KVA SILENT GENERATOR<br />
WITH STAMFORD<br />
ALTERNATOR - NEW<br />
CUMMINS 6BTA5.9G2<br />
125KVA SILENT GENERATOR<br />
WITH STAMFORD<br />
ALTERNATOR - NEW<br />
CUMMINS 6CT8.3 610HP<br />
HYRDAULIC POWER PACK<br />
W/ MURPHY PANEL<br />
– USED
100 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
FW&RBCRIGHTONRURALENGINEERINGPTYLTDtradingas<br />
Heavy Duty Outdoor Fire Bucket<br />
If you are looking for a fire bucket... for your<br />
9 year old daughter's birthday party, you<br />
should go to Bunnings.<br />
RURAL ENGINEERING Pty Ltd<br />
Cnr Nailor & Moama St, Hay, NSW, 2711<br />
Ph:02 6993 1768 Fax:02 6993 3042<br />
MOB: 0428 931 768<br />
<br />
“NEW”SPIRALWELDSTEELPIPE<br />
100–1800NBAssortedwallthickness,POA<br />
<br />
If you want a<br />
Fire Bucket /<br />
Pit which will<br />
make you<br />
mates weak<br />
at the knees,<br />
have a look<br />
at this.<br />
BULK<br />
ORDERDISCOUNTS<br />
$900<br />
“NEW”BLACKPIPE<br />
4.5mm(114mmOD)2.4&3mlengthsfrom$47+GSTeach<br />
3.5mm(88.9mmOD)2.4&3mlengthsfrom$40+GSTeach<br />
PUMPSETS<br />
4”36”Pumpsets<br />
Diesel&Electric<br />
ALLTERRAINCOLESHYDRACRANE<br />
Goodclearance4WD,mechanically<br />
sound,goodtyres&roadspeed.<br />
18mboom,currentlynotregistered.<br />
$29,000<br />
ALLENQUIRESph0269931768orcallJasen0428931768<br />
PET-FP-5176479-CS-289
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 101<br />
(07) 4630 4784<br />
www.nkf.net.au<br />
FREIGHT SERVICES AVAILABLE<br />
Road train capable of general freight. QLD &<br />
Northern NSW. Call for a quote<br />
S137. TA983091.<br />
POA<br />
DIESEL TANKS<br />
109,000L $59,950<br />
53,600L $26,264<br />
20,000L $11,000<br />
S139. TA983093<br />
SMALL STEEL PIPE<br />
11.5m 610x12.7 $3,276<br />
18m 406x6.4 $993<br />
18m 324x6.4 $1,103<br />
18m 273x8.2 $1,244<br />
S132. TA983086<br />
LARGE STEEL PIPE<br />
12m 1500x16 $9,469<br />
12m 1200x16 $7,365<br />
12m 1067x23.5 $6,380<br />
S131. TA983085<br />
STEEL DRILL TUBE<br />
89mm OD x 7mm wall<br />
9.5m $129 each inc GST<br />
3m $48 each inc GST<br />
2.35m $28 each inc GST<br />
S130. TA983082<br />
WATER TANKS<br />
36,000L $11,000<br />
10,000L $3,000<br />
7,500L $2,250<br />
S141. TA983098<br />
ROTARY DRUMS<br />
16m length 3.7m diameter<br />
16mm approx thickness<br />
44 tonne approx. S142. TA983100.<br />
$15,500<br />
NKF<br />
Lot 8 Wirth Road Charlton, Toowoomba, QLD 4350<br />
PO Box 58 Wyalla Plaza Q 4350<br />
PORTABLE BUILDINGS<br />
Full list of buildings. Available on our website.<br />
S140. TA983097<br />
(07) 4630 4784<br />
E nkfgroup@gmail.com www.nkf.net.au<br />
“ * Prices subject to change, check website or ring for current pricing.”<br />
HDPE PIPES<br />
20m DN560 PN12.5 $2,295<br />
20m DN630 PN12.5 $2,903<br />
20m DN800 PN12.5 $4,682<br />
S71. TA466248<br />
Specialising in Second Hand Industrial Equipment<br />
Mob: 0419 002 950<br />
PET-FP-5190451-A
102 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
A.C.N. 086 652 226<br />
Generators New & Used<br />
CATERPILLAR, CUMMINS, DETROIT, VOLVO,<br />
LISTER, ENGLISH ELECTRIC DORMAN, DEUTZ,<br />
PAXSMAN, FORD, RUSTON, TURBINES<br />
MITSUBISHI 460KVA GENERATOR<br />
Ex. Hospital Stand-by Unit - Only 372 Hours!.<br />
S194. TA991678.<br />
$28,000<br />
CATERPILLAR CAT 3412 550KVA GENERATOR Ex<br />
Stand-by Unit, 370Hrs. S203. TA1007649. $46,200<br />
ALLIS-CHALMERS 130KVA GENERATOR Allis-Chalmers / Woodard 130kVA<br />
Generator, 1145 Hours, Governor Engine Protection, Main Circuit breaker, Radiator<br />
Cooled Muffler, Mounted on Skid-Base. S175. TA954899. $9,000<br />
1166 Wellington Road Narre Warren East, Victoria, Australia 3804<br />
Darren: 0418 364 166 | aaamachinery@yahoo.com.au<br />
CATERPILLAR 3512 Generator, 1275kva, 300 hours, ex<br />
stand by unit. Can come with radiator fitted too skid. Call<br />
for price. S211. TA1018810.<br />
POA<br />
CATERPILLAR 400KVA 10,000 hours, maintained by caterpillar since<br />
new, all required maintenance has been done. Has been load tested<br />
and is ready to work. S216. TA1024753. $41,000<br />
WE BUY GENERATORS<br />
Scott: 0400 658 496 | scott@stcontractingvic.com<br />
PET-HH-5011243-A<br />
19-29 Curlew Cresc<br />
Tamworth NSW 2340<br />
www.philhuntparts.com.au<br />
brendan@philhuntparts.com.au<br />
FIAT 70CI Just in for Dismantling, Undercarriage 70% All<br />
Round, Rear Rippers, Good Running Engine, Hydraulic<br />
Angle Tilt Blade, Tree Pusher, All Parts Available, Phone<br />
Brendan 02 6762 4466. S140. TA1035748.<br />
POA<br />
ALLIS HD6E Just in for Dismantling, Undercarriage 80%<br />
All Round, Wet Engine Clutch, Rear Rippers, Angle Blade<br />
and Tree Pusher, All Parts Available, Phone Brendan 02<br />
6762 4466. S137. TA1035747. POA<br />
PHIL HUNT<br />
PARTS<br />
RING ALL HOURS<br />
NEW AND S/H PARTS<br />
ALLIS-CHALMERS/HANOMAG/MASSEY<br />
JOHN DEERE INDUSTRIAL<br />
PARTS FOR Dozers, Loaders, Drotts,<br />
Graders, Scrapers<br />
WRECKING DOZERS<br />
ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G,<br />
HDIIB, EP,<br />
HD15-16, HD16DC, HD16DP, HD19-21, HD41B<br />
FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B,<br />
BD10B, FD10E, BD20<br />
HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C,<br />
L600C, D600D Super, D700C<br />
JOHN DEERE : 1010C, 850<br />
LOADERS<br />
ALLIS-CHALMERS: TL12D, TL14, TL20, 545,<br />
605B, 645, 745B,C<br />
FIAT: FR20B<br />
LD3, LD5, LD7 & LD9 Scoopmobile<br />
HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77<br />
GRADERS<br />
ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A,<br />
B, FG95<br />
DRMCO/CHAMPION 562, 600, 720, 740<br />
JOHN DEERE 570, 570A, 670A, 770, 770A, 772A<br />
ALLIS WHEEL TRACTORS<br />
AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080,<br />
8010, 8050, 8070, 7580, 8550, 440<br />
ALSO AVAILABLE<br />
Track Chains, Rollers, Idlers, Sprockets<br />
Various 4-1 Buckets, POA<br />
A/H: (02) 6762 4466<br />
Ph: (02) 6762 4466<br />
Fax: (02) 6762 4555<br />
Mobile: 0429 624 144<br />
HANOMAG 33C Just in for Dismantling, Quick Hitch<br />
Bucket, Quick Hitch Forks, Diff and Trans in Good Order,<br />
All Parts Available, Phone Brendan 02 6762 4466. S135.<br />
TA1035746.<br />
POA<br />
JOHN DEERE 670D GRADER Just in for Dismantling, 12<br />
Foot Moldboard, Rear Rippers, 6068H Engine, DF180<br />
Transmsission, 14:00 x 24 Rims & Tyres, Low Hour<br />
Machine, All Parts Available. Phone Peter 02 6762 4466.<br />
S125. TA974288. POA<br />
Allis Chalmers • Fiat Allis • Hanomag • Massey • JD Industrial<br />
EMM-HH-5132462-B
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 103<br />
ABN 55 128 894 146<br />
WOLLONGONG<br />
REDUCED TO SELL<br />
BOMAG BW213DH-4<br />
2011, 3305 hrs, Bomag<br />
Vibratory Smooth Drum<br />
Roller with Padfoot Shells.<br />
Mine Spec. Good working<br />
condition. TA1002812.<br />
$60,000<br />
CATERPILLAR TRACK LOADER<br />
953C<br />
Recently re-painted. 12,859<br />
Hours, Multi Shank Ripper, 4 in 1<br />
Bucket, Air Con, Service Records,<br />
Great Tidy Machine - Ready for<br />
Work. TA1028920.<br />
$92,000<br />
CATERPILLAR CAT 963D<br />
TRACK LOADER<br />
8893 Hours, 189 HP, Multi<br />
Shank Ripper, 4 in 1 Bucket,<br />
Air Con, New Grouser Plates,<br />
Service Records, Recent<br />
Undercarriage Works.<br />
TA1025639.<br />
$150,000<br />
REDUCED TO SELL<br />
KOBELCO SK260LC-8<br />
2011, 10,294 Hours, Recently<br />
Serviced, Hyd Q/C Bucket,<br />
2900mm Stick, Aux Hyd Check<br />
valves, A/C, E-Stops, Safety Rails.<br />
TA1027375.<br />
$85,000<br />
SHEPHARD TRI-AXLE<br />
CHASSIS TIPPING TRAILER<br />
2006, Shephard Tri Axle<br />
Trailer. Bisalloy Body, 2 Way<br />
Gate, Asbestos Transport<br />
Approved, Electric Tarp.<br />
TA1019195.<br />
$54,990<br />
GENIE Z34/22IC KNUCKLE BOOM<br />
LIFT<br />
2003, Rated work load: 227KG,<br />
Maximum number of platform<br />
occupants 2, Maximum Platform<br />
Height: 10.6m, Maximum Platform<br />
Reach: 6.8m, Compliant until<br />
2023. TA1031034.<br />
$20,000<br />
ISUZU FSS550<br />
2001, Water Cart. 5000 Litre<br />
tank with pump & hose reel.<br />
241,000kms. 4WD. 6 Speed<br />
Manual. Fire Extinguisher.<br />
Toolbox. Recently Serviced.<br />
TA1033496.<br />
$45,000<br />
CATERPILLAR 740 ARTICULATED<br />
DUMP TRUCK<br />
2005, MDG15 Compliant with<br />
Current Certificate. Recently<br />
Serviced. 18,655 hours. TA1035014.<br />
$90,000<br />
All equipment serviced prior to release. Delivery options available Australia wide.<br />
Large range of Trucks, Utes, Machines, Attachments, Tools & Pumps available.<br />
EMM-FP-5211437-A<br />
Royce Clark 0414 649 134 or (02) 4294 8035<br />
www.triclarkbrothers.com.au sales@triclarkbrothers.com.au
104 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
www.liftek.com.au<br />
0447 64 33 23<br />
Griffith, NSW<br />
E: sales@liftek.com.au<br />
SNORKEL AND TRAILER PACKAGES Various S1930,<br />
1930ES Genie 1932 available, new and used trailers<br />
available, call for more info. S34. TA819706. $13,950<br />
TOYOTA 32-8FG30 3.0 TON 2013, 4.0M Lift Height, Side<br />
Shift, Solid Tyres. Ready for work. S64. TA992172.<br />
$13,500 + GST<br />
FORWARD BIN TIPPER New and Used available, call for<br />
more info. S6. TA653780.<br />
$4,000 + GST<br />
TOYOTA 7FBE18 ELECTRICS 1.8 ton lift capacity with 3<br />
stage mast, also available 7FBE20 with container mast,<br />
call for more info. S21. TA731606. $12,100<br />
RAYMOND DOUBLE DEEP REACH TRUCK Various lift<br />
heights available, call for more info. S31. TA794716.<br />
$9,900<br />
TOYOTA 32-8FG30 3 TON 3 Stage Container Mast, Side<br />
Shift Solid Tyres. Fully Serviced. S68. TA1001248.<br />
$16,000 + GST<br />
TRUCK WASH TWR 35 Brand new, 500ltr tank, 2100mm brush<br />
width, chemical regulation. Only requires one hydraulic forklift<br />
function. Will clean a B-Double in 10 minutes. S63. TA988194.<br />
$8,500 + GST<br />
TOYOTA 32-8FGK25 2.5 TON COMPACT 3 Stage<br />
Container Mast, Side Shift. Serviced ready for work.<br />
S67. TA1001247. $15,900 + GST<br />
JLG E400 ELECTRIC KNUCKLE LIFTS with<br />
recertification ready for work. Call for more info. S3.<br />
TA653777.<br />
$28,900 + GST<br />
Over 80 Forklifts, scissorlifts, telehandlers to choose from<br />
PET-FP-5208733-A
“Setting the standard for Quality & Value”<br />
THE INDUSTRY ’S CHOICE!<br />
CNC<br />
<strong>Machinery</strong><br />
Metal<br />
Working<br />
Sheet Metal<br />
Fabrication<br />
Wood<br />
Working<br />
Workshop<br />
& Automotive<br />
Lifting<br />
Handling<br />
Cutting<br />
Tools<br />
Machine Tool<br />
Accessories<br />
Measuring<br />
Equipment<br />
SB-420<br />
Sandblasting Cabinet<br />
• Heavy-duty steel cabinet<br />
• Left, right & top access doors<br />
• 1200 x 600 x 340-570mm<br />
blast area<br />
• Includes<br />
vacuum system,<br />
LED light, tempered<br />
glass screen,<br />
gloves, gun &<br />
ceramic nozzle<br />
Order Code: S302<br />
$<br />
1,450<br />
TM-2260G<br />
Centre Lathe<br />
• 560 x 1500mm capacity<br />
• 2 axis digital readout system<br />
• 105mm spindle bore<br />
• Triple SKF German spindle bearings<br />
• 350mm wide induction hardened bed<br />
• 2 speed high/low tailstock<br />
• Metric & imperial thread cutting<br />
• 12 spindle speeds (16-1600rpm)<br />
• 7.5kw/10hp, 415V motor<br />
• Includes 3 & 4 jaw chucks, faceplate,<br />
steadies, light, foot brake & coolant system<br />
Order Code: L637D<br />
$<br />
31,500<br />
Made in Taiwan<br />
MG-840<br />
Mechanical Guillotine<br />
• 2500mm x 4mm cutting capacity<br />
• 760mm backgauge with<br />
digital scale display<br />
• Equipped with shadow line lighting<br />
• Rapid blade adjustment<br />
• 9Crsi blades for stainless steel<br />
• Lubrication pump & reservoir<br />
for slideways<br />
• Photo electric rear guarding<br />
with 3 beams<br />
• 7.5kW / 10hp, 415V motor<br />
Order Code: S926A<br />
$<br />
12,500<br />
HPM-300T<br />
Industrial Hydraulic Press<br />
• 300 tonne force<br />
• Left or right sliding ram<br />
• 1300mm width between front post<br />
• 370mm piston ram stroke<br />
• Joystick pressure control<br />
• 22kW / 30hp, 415V motor<br />
• Includes pressure gauge<br />
Order Code: P408M<br />
$<br />
17,750<br />
INCLUDES<br />
SUPPORT<br />
PLATE & V<br />
BLOCKS<br />
IWB-40P5<br />
Industrial Work Bench Package Deal<br />
• IWB-40 Work bench<br />
• IBP-ST Backing panel<br />
• TC-750 Industrial tooling cabinet<br />
• HC-2 Industrial under-bench<br />
tooling cabinet<br />
• GSP-795 Pneumatic round stool<br />
• 8 x Hooks (4 single prong,<br />
4 double prong)<br />
• Plier holder, screwdriver holder,<br />
spanner holder<br />
• 22 Plastic buckets<br />
Order Code: K035<br />
$<br />
1,780<br />
SAVE $108 off RRP<br />
HEAVY<br />
DUTY STEEL<br />
FABRICATED<br />
FRAME<br />
PB-135B<br />
Hydraulic CNC Pressbrake<br />
• 135T x 4000mm pressing capacity<br />
• CNC FASFOLD 202 programmable control<br />
• Hardened ballscrew backgauge<br />
for accuracy<br />
• Segmented heavy duty 86°<br />
offset top punch<br />
• Multi vee solid bottom<br />
die block 4000mm<br />
• European intermediate<br />
clamps with safety key<br />
• Reinforced side frames<br />
for addition strength<br />
• Adjustable steel fabricated<br />
sheet supports<br />
• 7.5kW / 10hp 415V<br />
motor power<br />
• Includes foldsafe<br />
safety guarding system<br />
Order Code: S908F<br />
$<br />
51,900<br />
PAC5-RM-D<br />
Rotary Screw Pilot<br />
Air Compressor<br />
• 648L/Min.<br />
22.9CFM @ 10 bar<br />
• Integrated refrigerated<br />
air dryer system<br />
• Multi-function<br />
backlight control<br />
• 4 maintenance timers<br />
oil, oil separator,<br />
air & oil filters<br />
• 5.5kW / 7.5hp, 415V<br />
Order Code: C5352<br />
$<br />
9,150<br />
Z3050x16<br />
Radial Arm Drill<br />
• 50mm drilling capacity<br />
• 5MT spindle taper<br />
• 16 spindle speeds (25-2000rpm)<br />
• 16 auto feeds (0.04-3.2mm/rev)<br />
• M36 thread tapping capacity<br />
• Hydraulic feed & spindle drive system<br />
• 350-1600mm spindle to column<br />
• Includes box table 620x500x500mm<br />
• 4/5.3hp, 415V motor<br />
Order Code: D166<br />
$<br />
18,750<br />
HPK-100NC - Hydraulic Section<br />
& Pipe Rolling Machine<br />
• 100 x 100 x 12mm angle capacity<br />
• NC 3-Axis easy view control panel<br />
• Hydraulic lateral guide rollers<br />
• High quality hardened rolls<br />
• Three rollers are powered<br />
• 7.5kW/10hp, 415V motor<br />
• Made in Turkey<br />
Made in Turkey<br />
Order Code: S758C<br />
$<br />
39,500<br />
UNIQUE PROMO CODE<br />
PE0720<br />
ONLINE OR INSTORE!<br />
VIEW AND PURCHASE THESE ITEMS ONLINE AT<br />
www.machineryhouse.com.au/PE0720<br />
SYDNEY<br />
(02) 9890 9111<br />
1/2 Windsor Rd,<br />
Northmead<br />
BRISBANE<br />
(07) 3715 2200<br />
625 Boundary Rd,<br />
Coopers Plains<br />
MELBOURNE<br />
(03) 9212 4422<br />
4 Abbotts Rd,<br />
Dandenong<br />
PERTH<br />
(08) 9373 9999<br />
11 Valentine St,<br />
Kewdale<br />
Specifications & Prices are subject to change without notification. All prices exclude GST and valid until 03-08-20<br />
07_P&E_060720
106 Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
69 LOUDOUN ROAD<br />
DALBY, QLD 4405<br />
Yard Phone (07) 4662 0900<br />
Mobile Phone 0417 617 461<br />
Fax (07) 4662 0911<br />
Email: thomastrading@bigpond.com<br />
www.thomasmanufacturing.com.au<br />
THOMAS STANDARD BATCHING PLANT WITH DIESEL ENGINE & PLATFORM Various models available.<br />
THSBPWDP. TA319287. MADE TO ORDER. PRICES START FROM $102,487.00 + GST = $112,736<br />
THOMAS DOUBLE<br />
TROMMEL<br />
2 barrel screening<br />
trommel with 8m³ feed<br />
hopper complete with<br />
1,500mm feed belt -<br />
trommel feed conveyor<br />
12m x 1,200mm.<br />
77635. TADPLIn77635.<br />
Quoted to Customer<br />
Spec POA<br />
THOMAS PRE COATING<br />
PLANT<br />
1 x 6 cubic metre Hopper<br />
with 750 wide Feed<br />
Conveyor. 12 metre x 600<br />
wide Radial Stacker.<br />
Electrical Cabinet on stand,<br />
fitted with all necessary<br />
starting equipment.<br />
THPCP2014. TADPLIn77608.<br />
Quoted to Customer Spec<br />
POA<br />
THOMAS RADIAL<br />
STACKER<br />
15m x 900mm wide<br />
hydraulic drive<br />
hydraulic raise & lower.<br />
TRS15MX900. TA114185.<br />
Quoted to Customer<br />
Spec POA<br />
THOMAS FEED HOPPER<br />
20 CUBIC METER<br />
With 900mm wide feed<br />
conveyor. TH20900.<br />
TA122049.<br />
Quoted to Customer<br />
Spec POA<br />
PET-F-GMAI-5059125-A
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au 107<br />
NATIONWIDE MACHINERY<br />
SALES & HIRE<br />
0407 459 075 and 0488 927 922 | sales@nwmachinery.com.au | 5L Gilgandra Road Dubbo NSW 2830<br />
CATERPILLAR TH414C 2014, 1700 Hours, Stabiliser<br />
Legs, 4WD, 4WS, 4 Ton Capacity, 14 Meter Reach.<br />
S2258. TA1036638. $69,000 + GST<br />
JLG 4009 PS 2009, Telehandler, 4400 Hours, 4WD, 4WS,<br />
ROPS Air Cabin, Good Tyres, Cheap 4 Tonner with 9<br />
Meter Reach. All Prices Exclude GST. S2242. TA1035616.<br />
$54,000 + GST<br />
CATERPILLAR D6K2 XL 2019, Dozer, Unused 2019<br />
Model, ROPS Air Cabin, 6 Way Blade, Rear Rippers,<br />
Brand New and Great Value! All Prices Exclude GST.<br />
S2244. TA1035628. $295,000 + GST<br />
DYNAPAC LP8500 2007, 800mm Wide, 760 Hours,<br />
Remote Control, Operates Very Well and Cheap!<br />
S1935. TA985592. $6,000 + GST<br />
BOBCAT S630 Skidsteer Loader, 2600 Hours, New Tyres,<br />
Air ROPS Cabin, 74HP, 989kg SWL, Operates Very Well.<br />
All Prices Exclude GST. S1738. TA951795. $35,000 + GST<br />
TL SIEVE/SKELETON BUCKET TO SUIT 20 TONNER<br />
1250mm or 1400mm Wide. 80mm Pin Holes 450mm<br />
Centres 330mm Ears. S1715. TA945950. $4,000 + GST<br />
KUBOTA 20 KVA GENERATOR 7800 Hours, Very Tidy Unit<br />
that Operates Well, Has Been Load Tested. All Prices<br />
Exclude GST. S2253. TA1035991.<br />
$7,000 + GST<br />
BARKER TRI AXLE FULL WIDENING DROP DECK 2006,<br />
Full Axle Widener, 3900mm Top Deck, 10000mm Bottom<br />
Deck, Rego, Tare 12300kg. S2220. TA1030728.<br />
$95,000 + GST<br />
CATERPILLAR 140H Series II 16200 Hrs, Air ROPS Cabin,<br />
New Drive Tyres, New Edges, Engine Rebuilt, New<br />
Ripper Pins and Bushes, Operates Well!. S2079. TA1010018.<br />
$109,000 + GST<br />
HYUNDAI R210LC-9 2012, 4800 Hours, Piped, Hand<br />
Rails, Drop Valves, Good Undercarriage, Quick Hitch and<br />
GP Bucket. S2231. TA1034794.<br />
$95,000 + GST<br />
CATERPILLAR 324DL 2012, 11,200 hours, Air ROPS<br />
cabin, Piped, Quick Hitch, GP bucket, Very Tidy and Well<br />
Maintained, 25 Tonner. S2167. TA1026070. $79,000 + GST<br />
VOLVO EC290BLC 2011 Model, 8300 Hours, Very Good<br />
Undercarriage, Hydraulic Quick Hitch, Mud and GP<br />
Bucket, Piped, Operates Very Well!. S2234. TA1034842.<br />
$89,000 + GST<br />
KOMATSU GD555-3 2005, 6800 Hours, ROPS Air Cabin,<br />
Rear Rippers, Good Tyres, Clean Tidy Low Hour Grader<br />
That is Tight and Work Ready!. S2255. TA1036295.<br />
$89,000 + GST<br />
TORO MULTI PRO 5700D 1100 Litre Tank, Kubota Diesel<br />
Engine, 16 k/ph Speed, 6.25m Spray Width, 3 spray<br />
sections with 4x nozzles per section. S2235. TA1035016.<br />
$18,000 + GST<br />
www.nwmachinery.com.au<br />
VOLVO FM300 2007, 340000kms, Auto Transmission,<br />
Hydraulic Drive Pump, Cabin Controls, Cannon, Approx<br />
14000 Litre Alloy Tank. S2243. TA1035621. $119,000 + GST<br />
PET-FP-5171103-A
AUSTRALIA’S<br />
LARGEST FORKLIFT<br />
WHOLESALER<br />
RAYMOND 740 R35TT<br />
CAPACITY:<br />
2,041kg<br />
Lift Height:<br />
8,153mm<br />
Comment<br />
Low hour single deep reach truck.<br />
1300 438 3675<br />
formidableforklifts.com.au<br />
6/220-230 Barry Rd, Campbellfield (03) 9357 6291<br />
Sales@formidableforklifts.com.au
PRIVATE Advertising<br />
tradeplantequipment.com.au/sell 1300 362 272<br />
GRACO XM PFP<br />
Pump and container. Located in Western Sydney, ..<br />
NSW. DIY960730.<br />
0412 249 163.<br />
$68,000<br />
NEW COMPULOAD<br />
SCALES & PRINTER FOR<br />
ON BOARD WEIGHING!<br />
Made in Australia<br />
Static weighing<br />
Dynamic weighing<br />
Full data management<br />
Subtract function<br />
Split load function<br />
Can be fitted to all types of machines<br />
Optional USB Downloading (6000 only)<br />
Large LED backlight display<br />
Fully automatic<br />
Simple to use<br />
Improves profitability<br />
Fast accurate weighing<br />
Optional printer available<br />
1800 285 277<br />
www.compuload.com.au<br />
AVAILABLE NATION-WIDE.<br />
SELL YOUR TRUCK<br />
VISIT TRADETRUCKS.COM.AU/SELL OR CALL 1300 362 272
PRIVATE Advertising<br />
tradeplantequipment.com.au/sell 1300 362 272<br />
CRUSHING PLANT SKID BASED 42x27 Brown Lenox Jaw,<br />
1500 Kawaski gyro, 16x6x2 Allis Chalmers screen, 4ft<br />
Symons standard gyro, 750KVA Gen. set Cummins Stanford<br />
all electric. QLD Ph 07 49 505 307 or 0427 775 466, .. QLD.<br />
DIY957171. 07 4950 5307.<br />
$875,000 + GST<br />
KOMATSU FD25HT-17 2016, 2.5 ton diesel powered<br />
forklift, 343292. NSW. DIY1038165. 0439272232. $16,500<br />
WABCO 50B Dump truck x 2. Parts only. Good 1710<br />
Cummins motors x 2. Mob: 0427 775 466, .. QLD. DIY496585.<br />
07 4950 5307. $20,000 plus GST<br />
SYMONS 7FT CONCAVE ., .. QLD. DIY540214. 07 4950 5307.<br />
0427 775 466. $7,000 PLUS GST<br />
CATERPILLAR D6 TRACK ROLLERS Believed to fit a D6 Cat<br />
Dozer, set of 6. Please call 0427 775 466, .. QLD. DIY857141.<br />
07 4950 5307. $1,200 + GST<br />
KUE KEN 48 X 36 JAW CRUSHER On stand with feeder &<br />
scalper, refurbished. Ph 07 4950 5307 or 0427 775 466, ..<br />
QLD. DIY957170. 07 4950 5307.<br />
$500,000 + GST<br />
SAND DRYER Gas powered, on stand. Good order. 40T/HR,<br />
7.5m x 1,600mm, working when pulled down, .. QLD.<br />
DIY496592. 07 4950 5307. 0427 775 466. $35,000 plus GST<br />
BALL MILL 30ft x 6ft, .. QLD. DIY540209. 07 4950 5307.<br />
0427 775 466. $45,000 PLUS GST<br />
SYMONS 7FT MANTLES X2, .. QLD. DIY540212. 07 4950 5307.<br />
0427 775 466. $12,000 PLUS GST<br />
SELL YOUR TRUCK<br />
VISIT TRADETRUCKS.COM.AU/SELL<br />
OR CALL 1300 362 272<br />
CATERPILLAR 992C 1985. Wrecking for parts, .. QLD.<br />
DIY645033. 07 4950 5307.<br />
POA<br />
NAKAYAMA CRUSHER FEEDER 9ft x 30inch, unused. Mob:<br />
0427 775 466, .. QLD. DIY618643. 07 4950 5307.<br />
$10,000 PLUS GST<br />
NOW OPEN! YOUR NEW ONE-STOP TRUCKING SHOP.<br />
All the latest news & reviews, industry jobs and new & used trucks for sale<br />
visit www.fullyloaded.com.au
RESEARCH • COMPARE • BUY • SELL<br />
AUSTRALIA’S#1<br />
FARM MACHINERY<br />
MARKETPLACE<br />
BUY<br />
More than 23,400* tractors<br />
& farm machinery for sale,<br />
plus latest news, video reviews<br />
& specifications of new<br />
farming equipment.<br />
SELL<br />
Maximise your ad’s exposure<br />
online and in print with<br />
<strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong>.<br />
List your ad for<br />
as low as $35<br />
www.tradefarmmachinery.com.au<br />
*Dealer and private stock items listed as at Feb 2016.
PRIVATE Advertising<br />
tradefarmmachinery.com.au/sell 1300 362 272<br />
Powered by<br />
CHOOSE YOUR AD PACKAGE<br />
Tick the circle to select your<br />
package. Each package includes<br />
1 print issue in <strong><strong>Farm</strong>s</strong> & <strong>Farm</strong><br />
<strong>Machinery</strong> and until sold on<br />
tradefarmmachinery.com.au.<br />
VALUE ..............$35<br />
Print size: 1/36 Page<br />
Paper: Newsprint colour<br />
Wed Ad Type: Standard<br />
PREMIUM .......$55<br />
Print size: 1/36 Page<br />
Paper: Newsprint colour<br />
Wed Ad Type: Premium<br />
GRAND .............$85<br />
Print size: 1/18 Page<br />
Paper: Gloss<br />
Wed Ad Type: Premium<br />
JUMBO .......... $130<br />
Print size: 1/18 Page<br />
Paper: Gloss<br />
Wed Ad Type: Premium<br />
MONSTER .... $280<br />
Print size: 1/6 Page<br />
Paper: Gloss<br />
Wed Ad Type: Premium<br />
MEGA ............ $750<br />
Print size: 1/2 Page<br />
Paper: Gloss<br />
Wed Ad Type: Premium<br />
Price includes GST<br />
PRINT:<br />
MAX 25<br />
WORDS<br />
PRINT:<br />
MAX 25<br />
WORDS<br />
PRINT:<br />
MAX 25<br />
WORDS<br />
PRINT:<br />
MAX 35<br />
WORDS<br />
PRINT:<br />
MAX 50<br />
WORDS<br />
PRINT:<br />
MAX 95<br />
WORDS<br />
PRIVATE Advertising<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
SELL YOUR<br />
FARM<br />
MACHINERY<br />
MAKE AND MODEL 9 metre<br />
cut, quick release, folding<br />
wings, V8 twin turbo, REG.<br />
STATE. DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre<br />
cut, quick release, folding<br />
wings, V8 twin turbo, REG.<br />
STATE. DIYXXXXXX. PH<br />
$PRICE<br />
tradefarmmachinery.com.au/sell 1300 362 272<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre<br />
cut, quick release, folding<br />
wings, V8 twin turbo, REG.<br />
STATE. DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
MAKE AND MODEL 9 metre cut, quick release,<br />
folding wings, V8 twin turbo, REG. STATE.<br />
DIYXXXXXX. PH<br />
$PRICE<br />
VISIT THE WEBSITE<br />
OR CALL 1300 362 272<br />
MAKE AND MODEL 9 metre<br />
cut, quick release, folding<br />
wings, V8 twin turbo, REG.<br />
STATE. DIYXXXXXX. PH<br />
$PRICE<br />
PREMIUM<br />
MAKE AND MODEL 9 metre<br />
cut, quick release, folding<br />
wings, V8 twin turbo, REG.<br />
STATE. DIYXXXXXX. PH<br />
$PRICE<br />
NEWSPRINT<br />
GRAND<br />
GLOSS<br />
VALUE<br />
NEWSPRINT<br />
MAKE AND MODEL 9 metre<br />
cut, quick release, folding<br />
wings, V8 twin turbo, REG.<br />
STATE. DIYXXXXXX. PH<br />
$PRICE<br />
ADVERTISEMENT DEADLINE<br />
Issue: 388 Deadline: Tue 28/07/2020 5pm On Sale: Thu 13/08/2020<br />
Issue: 389 Deadline: Tue 25/08/2020 5pm On Sale: Thu 10/09/2020<br />
PRIVATE Advertising<br />
MAKE AND MODEL<br />
9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone<br />
$PRICE<br />
MAKE AND MODEL<br />
9 metre cut, quick release,<br />
folding wings, V8 twin turbo,<br />
REG. STATE. DIYXXXXXX. Phone<br />
$PRICE<br />
tradefarmmachinery.com.au/sell 1300 362 272<br />
MONSTER<br />
GLOSS<br />
MAKE AND MODEL<br />
9 metre cut, quick release,<br />
folding wings, V8 twin turbo,<br />
REG. STATE. DIYXXXXXX. Phone<br />
$PRICE<br />
MEGA<br />
GLOSS<br />
JUMBO<br />
GLOSS<br />
MAKE AND MODEL<br />
9 metre cut, quick release,<br />
folding wings, V8 twin turbo,<br />
REG. STATE. DIYXXXXXX. Phone<br />
$PRICE<br />
1 item per ad space regardless of ad size<br />
Details<br />
PAYMENT DETAILS & CONTACT DETAILS<br />
Have you included your photo(s)?<br />
Year: ___________________________________________________________________<br />
Make: ___________________________________________________________________<br />
Model: __________________________________________________________________<br />
Kms: ____________________________________________________________________<br />
Extras: __________________________________________________________________<br />
________________________________________________________________________<br />
________________________________________________________________________<br />
________________________________________________________________________<br />
Phone No. _______________________________________________________________<br />
Reg/Eng No./Vin No. _______________________________________________________<br />
Only one Required by law<br />
________________________________________________________________________<br />
Price $ __________________________________________________________________<br />
Required by law<br />
Must be GST inclusive price<br />
Please see the Marketplace Pages for location of Privacy Notice.<br />
Please do not provide information about me to any organisation not associated with this publication.<br />
I enclose $ ____________ ____<br />
Cheque / Money Order / Credit Card<br />
Payment for the above advertisement.<br />
BANKCARD<br />
MASTERCARD<br />
VISA<br />
Expiry Date: ___________________________________________<br />
Signed: _______________________________________________<br />
Amount: ______________________________________________<br />
Please include a cheque or money order or credit card details<br />
YOUR NAME ____________________________<br />
ADDRESS _______________________________<br />
STATE___________ POSTCODE ______________<br />
EMAIL __________________________________<br />
Signed: _________________________________<br />
(Not for publication)<br />
By signing this form you acknowledge that you have read and understood the<br />
advertising Terms & Conditions as stated at http://www.diyads.com.au/DIY/DIY020.aspx<br />
The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Bauer Media Ltd advises buyers<br />
beware of negotiating by email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas. Buyers should contact Bauer Media Ltd customer services on 1300 362 272 if they<br />
suspect an advertisement may be fraudulent. In the event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Bauer Media Ltd (The Publisher) shall not be held liable or responsible.<br />
Locked Bag 12, Oakleigh, Vic 3166<br />
1300 362 272 privateads@bauertrader.com.au<br />
tradefarmmachinery.com.au/sell
Issue 387 index<br />
Active <strong>Machinery</strong> (VIC) ....................................................................... 64<br />
Agco Australia Limited (VIC)........................................ Front Cover, 116<br />
Ag-Pride Australia Pty Ltd (NSW) ....................................................... 17<br />
Agrison Pty Ltd (VIC)..................................................................... 32, 59<br />
All Diesels (QLD).................................................................................. 69<br />
Bettabuilt Buckets Pty Ltd (NSW) ................................................. 45, 61<br />
Black Truck & Ag (QLD) ....................................................................... 67<br />
Brisbane Mini Excavators (QLD)......................................................... 23<br />
BYPY Transmissions (VIC)................................................................... 30<br />
Intersales Temora (NSW) ............................................................83<br />
Lyndoch Motors (SA) ..................................................................82<br />
Rocky River Ag Services (SA)......................................................84<br />
Claas Harvest Centre Colac (VIC)....................................................... 74<br />
Cobram <strong>Farm</strong> Equipment (VIC) .......................................................... 82<br />
Croplands Equipment Pty Ltd (SA)..................................................... 67<br />
Daken ASV (NSW)............................................................................ 2, 12<br />
Dieci Australia (NSW) .......................................................................... 26<br />
Echuca Rural (VIC) .............................................................................. 76<br />
EL-Gra Engineering (NSW) .................................................................. 25<br />
FAE Australia Pacific Pty Ltd (VIC) ........................................................ 7<br />
<strong>Farm</strong>gard Pty Ltd (VIC).................................................................. 11, 44<br />
Fieldquip Australia P/L (QLD).............................................................. 21<br />
G & J East Kadina (SA)......................................................................... 68<br />
Geronimo <strong>Farm</strong> Equipment Pty Ltd (NSW) .......................................... 9<br />
Goldacres Holdings Pty Ltd (VIC)........................................................ 16<br />
Grainrite (VIC)...................................................................................... 20<br />
Greg Allan <strong>Farm</strong> <strong>Machinery</strong> (VIC)....................................................... 29<br />
GWS <strong>Machinery</strong> (NSW) ....................................................................... 74<br />
Hicks <strong>Machinery</strong> (VIC)......................................................................... 80<br />
Inlon Pty Ltd (NSW) ............................................................................... 8<br />
Jadan Enterprises (NSW) .................................................................... 19<br />
JNR Engineering (VIC) ........................................................................... 5<br />
John Shearer Pty Ltd (SA) ................................................................... 22<br />
Kioti (VIC)........................................................................................... 115<br />
Korea Trade Commission (KOTRA Sydney) (NSW) ............................. 10<br />
Loxton Engineering Pty Ltd (SA)......................................................... 80<br />
Massaro Motors (VIC)......................................................................... 76<br />
Maxximus <strong>Farm</strong> Equipment (VIC)....................................................... 66<br />
Mirco Brothers <strong>Machinery</strong> (WA)......................................................... 13<br />
Muller Fabrications (QLD)................................................................... 31<br />
North East Tractors and <strong>Machinery</strong> Pty (SA) ..................................... 72<br />
Pickman Equipment (VIC)................................................................... 57<br />
Poole & Jackson Pty Ltd (VIC)............................................................. 82<br />
Powerace Pty Ltd (WA)....................................................................... 66<br />
Private Advertising Coupon ............................................... 112<br />
Rebel Equipment (NSW) ..................................................................... 24<br />
Robinsons of Bookham (NSW) ........................................................... 77<br />
Rocca Industries (QLD) ....................................................................... 41<br />
Rota Moulding Pty Ltd (WA) ............................................................... 80<br />
Rural Wrecking Co (NSW) ................................................................... 81<br />
Safelift Solutions (VIC)......................................................................... 49<br />
Sammut Agricultural <strong>Machinery</strong> Pty Ltd (NSW)................................. 53<br />
Shell (VIC) .............................................................................................. 3<br />
Smallaire (VIC)..................................................................................... 68<br />
Spider GT (VIC) .................................................................................... 37<br />
TVK Group (VIC)................................................................................... 39<br />
Vanderfield (QLD)................................................................................ 75<br />
Veldonas (VIC)..................................................................................... 70<br />
WA <strong>Farm</strong>ers (WA) ............................................................................... 35<br />
Wrights Tractor Sales & Service (SA).................................................. 73<br />
Issue 327 index<br />
A One Lift Truck Services (NSW)................................................... 92<br />
AAA <strong>Machinery</strong> (VIC) ........................................................................ 102<br />
AJS <strong>Machinery</strong> (NSW) ......................................................................... 98<br />
Allis Chalmers Australia (NSW)......................................................... 102<br />
Atlas Weighing (NSW) ....................................................................... 109<br />
Brisbane Welder Repairs & Rentals (QLD) ................................... 96<br />
Diesel Engines Pty Ltd (QLD) .............................................................. 99<br />
Diesel Parts & Service<br />
Diesel Parts & Service Pty Ltd (QLD) ............................................ 86<br />
Forklift Traders (NSW) ......................................................................... 97<br />
Formidable Forklifts Pty Ltd (VIC)..................................................... 108<br />
FW & RB Crighton Pty Ltd (NSW)...................................................... 100<br />
Hare & Forbes (SYDNEY) (NSW) ....................................................... 105<br />
Liftek Australia (NSW) ....................................................................... 104<br />
Nationwide <strong>Machinery</strong> Sales & Hire (NSW) ..................................... 107<br />
NKF Group (QLD)............................................................................... 101<br />
Phil Hunt Parts (NSW) ....................................................................... 102<br />
PR Power Pty Ltd (WA) ...................................................................... 95<br />
Price & Speed P/L (NSW).................................................................... 93<br />
Skyreach Pty Ltd (QLD) ....................................................................... 94<br />
Thomas Manufacturing (QLD) .................................................... 106<br />
Titan Heavy Industries (VIC) ............................................................... 91<br />
Tri Clark Brothers Pty Ltd (NSW)....................................................... 103<br />
Used Cranes Australia (NSW) ............................................................. 96<br />
www.tradefarmmachinery.com.au<br />
*Dealer and private stock items listed as at Feb 2016.<br />
TERMS AND CONDITIONS<br />
Acceptance of all advertising is subject to review and approval by management, the publisher reserves the right to edit, revise or reject any<br />
advertisements for any reason. The Publisher’s liability for damages resulting from errors in any advertising that it publishes or from its failure<br />
to publish any advertisement that it has agreed to publish shall be limited to the amount it actually received in consideration for its agreement<br />
to publish the advertisements in question. The Publisher shall not be responsible for any special, incidental or consequential damages suffered<br />
by any party resulting from its errors and/or omissions. The advertiser accepts all liability for the content of all advertising supplied by it and<br />
agrees to defend, indemnify and hold harmless the Publisher from any and all claims. All photographs become the property of Bauer Media Ltd.<br />
For dealer and commercial advertising these terms and conditions should be read in conjunction with the terms, conditions, warranties and<br />
indemnities published in our dealer and commercial rate cards.<br />
The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers<br />
are solely responsible for their own negotiations and transactions with advertisers. Bauer Media Ltd advises buyers beware of negotiating by<br />
email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or<br />
overseas. Buyers should contact Bauer Media customer services on 1300 362 272 if they suspect an advertisement may be fraudulent. In the<br />
event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Bauer Media Ltd (The Publisher)<br />
shall not be held liable or responsible.<br />
PRIVACY NOTICE<br />
This issue of <strong><strong>Farm</strong>s</strong> and <strong>Farm</strong> <strong>Machinery</strong> is published by Bauer Media Pty Ltd (Bauer).<br />
Bauer may use and disclose your information in accordance with our Privacy Policy, including to provide you with your requested products<br />
or services and to keep you informed of other Bauer publications, products, services and events. Our Privacy Policy is located at www.<br />
bauer-media.com.au/privacy/ It also sets out on how you can access or correct your personal information and lodge a complaint. Bauer may<br />
disclose your personal information offshore to its owners, joint venture partners, service providers and agents located throughout the world,<br />
including in New Zealand, USA, the Philippines and the European Union.<br />
In addition, this issue may contain Reader Offers, being offers, competitions or surveys. Reader Offers may require you to provide personal<br />
information to enter or to take part. Personal information collected for Reader Offers may be disclosed by us to service providers assisting<br />
Bauer in the conduct of the Reader Offer and to other organisations providing special prizes or offers that are part of the Reader Offer. An<br />
opt-out choice is provided with a Reader Offer. Unless you exercise that opt-out choice, personal information collected for Reader Offers<br />
may also be disclosed by us to other organisations for use by them to inform you about other products, services or events or to give to other<br />
organisations that may use this information for this purpose.<br />
If you require further information, please contact Bauer's Privacy Officer either by email at privacyofficer@bauer-media.com.au or mail at<br />
Privacy Officer Bauer Media Pty Ltd, 54 Park Street, Sydney NSW 2000.<br />
www.bauertrader.com.au<br />
DEALER ADVERTISING 1300 362 355 n PRIVATE ADVERTISING 1300 362 272
TESTED<br />
$24,750 $160,000<br />
$199,980 $50,000<br />
CASE IH 695XL. 70hp, Cabin, Challenge 349E<br />
front end loader + more • NSW 0429 467 147<br />
Serafin <strong>Machinery</strong> brings Czech manufacturer<br />
<strong>Farm</strong>et’s range of deep and disc cultivators to<br />
the local market >> Page 14<br />
2016 GVM Mako. Spra coupe, 2vm boom,<br />
1500L tank. • NSW 0488 442 372<br />
SPRAYERS<br />
8 PAGE SPECIAL FEATURE<br />
2018 New Holland T7-260. 220hp, L4500<br />
loader + much more • VIC 0402 851 544<br />
items for sale<br />
in print & online<br />
Issue 382 > $7.95 > On sale 27/02/20<br />
2017 Kioti RX8030SP. ROPS, Loader & 4in1,<br />
had only light work • QLD 0437 113 771<br />
4x4s now for sale!<br />
4/3/20, 2:48 pm<br />
Page 1 of 1<br />
4/3/20, 2:48 pm<br />
Page 1 of 1<br />
SEARCH<br />
NEW AND USED TRACTORS FOR SALE IN<br />
AUSTRALIA BAUER TRADER MEDIA<br />
Find new and used Tractors for sale with <strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong><br />
magazine<br />
NEXT<br />
SEARCH<br />
Page 1 of 188 (1,875 results)<br />
Sort by Premium Ads<br />
list map<br />
NEW AND USED TRACTORS FOR SALE IN<br />
AUSTRALIA<br />
Find new and used Tractors for GET sale ALERTS<br />
with <strong><strong>Farm</strong>s</strong> & <strong>Farm</strong> <strong>Machinery</strong><br />
magazine<br />
CASE IH MAXXFARM 25 TRACTOR NEXT<br />
$19,750<br />
Page 1 of 188 (1,875 results)<br />
Sort by Premium Ads<br />
list map<br />
GET ALERTS<br />
CASE IH MAXXFARM 25 TRACTOR<br />
$19,750<br />
Tractors / Tractors / 0-40hp<br />
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD<br />
FEL: YES Rated Engine Power - hp: 28<br />
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380<br />
hours indicated, with books, approximately 28 horsepower, AS NEW *price<br />
includes gst<br />
Mclaren Vale, SA<br />
Tractors / Tractors / 0-40hp ! CALL 08 7007 6847<br />
RefCode: TA978637 Class: 0-40hp Drive Type: 4WD<br />
FEL: YES Rated Engine SAVE Power - ITEM hp: 28<br />
4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380<br />
hours indicated, with books, approximately 28 horsepower, AS NEW *price<br />
includes gst<br />
EMAIL SELLER<br />
Mclaren Vale, SA<br />
KUBOTA 8540<br />
! CALL 08 7007 6847<br />
$22,000<br />
SAVE ITEM<br />
EMAIL SELLER<br />
KUBOTA 8540<br />
$22,000<br />
BAUER TRADER MEDIA<br />
Tractors / Tractors / 40-100hp<br />
RefCode: TA994405 Class: 40-100hp Drive Type: FWA<br />
Number Cylinders/cc: 4 Rated Engine Power - hp: 85<br />
Usage Hours: 5,800<br />
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives<br />
very well. Xgoverment . Inspection most welcome<br />
Stonyford, VIC<br />
Tractors / Tractors / 40-100hp<br />
! CALL 03 8547 8644<br />
RefCode: TA994405 Class: 40-100hp Drive Type: FWA<br />
Number Cylinders/cc: 4 Rated Engine Power - hp: 85<br />
Usage Hours: 5,800 SAVE ITEM<br />
Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives<br />
very well. Xgoverment . Inspection most welcome<br />
EMAIL SELLER<br />
Stonyford, VIC<br />
KUBOTA L1-24DT TRACTOR WITH 4 IN 1<br />
! CALL 03 8547 8644<br />
FEL 28HP<br />
$21,450<br />
SAVE ITEM<br />
EMAIL SELLER<br />
Powered by<br />
RESEARCH • COMPARE • BUY • SELL<br />
AUSTRALIA’S #1<br />
FARM MACHINERY MARKETPLACE *<br />
BUY<br />
More than 40,000 tractors,<br />
spreaders, harvesters, hay tools,<br />
feeders, sprayers, trailers, and<br />
attachments, and other parts and<br />
accessories currently listed for sale<br />
SELL<br />
Unlimited<br />
stock listings on<br />
Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
for just<br />
$360 per month<br />
Tractors, farm machinery & materials handling equipment for sale<br />
Four High, Two Tonne<br />
Tobroco Giant 6004 Loader<br />
Off the Chain<br />
Hustler’s Chainless LX104 Bale Feeder<br />
Fully Charged<br />
Ram 1500 Laramie V6 Ecodiesel<br />
,!3BD0A6-aaejdg!:K;N<br />
Czech<br />
44,480+<br />
MATE<br />
Trucks, utes and<br />
8,340+<br />
www.Trade<strong>Farm</strong><strong>Machinery</strong>.com.au<br />
* Based on stock items for sale as at March 2020
BUILT in south korea<br />
for australian conditions.<br />
FINANCE FROM 0.00 % pa** 4 YEAR WARRANTY °<br />
rx rops<br />
series<br />
rx7030P<br />
PRICE INCLUDING CASH BACK<br />
& 4 IN 1 LOADER<br />
$<br />
44,995 * EX GST<br />
$<br />
49,495 * inc GST<br />
70 or 80hp Kioti Diesel Engine<br />
Wet Clutch Forward - Reverse Shuttle<br />
Declutch Button<br />
24 x 24 Manual Transmission<br />
2x Rear Remotes Standard<br />
rx8030P<br />
PRICE INCLUDING CASH BACK<br />
& 4 IN 1 LOADER<br />
$<br />
48,295 * EX GST<br />
$<br />
53,125 * inc GST<br />
A KIOTI MECHRON<br />
WORTH OVER<br />
$<br />
20K<br />
Simply purchase any tractor from the PX or RX range between 1 st June and 31 st December 2020<br />
to go into the draw for your chance to win a KIOTI MECHRON 22OO!<br />
Visit www.kioti.com.au for details.<br />
20<br />
TH<br />
A NNIVERSARY<br />
2000-2020<br />
PHONE 1800 186 866 OR VISIT WWW.KIOTI.COM.AU<br />
*Pricing ex Brisbane, Melbourne and Perth warehouses. Pre-delivery and freight charges may apply. **Establishment fee and commercial credit criteria applies. ABN holders only. PFG Credit 0.00%p.a. special<br />
offer requires minimum 1/3rd deposit and 24 monthly repayments. PFG Credit is a division of De Lage Landen Pty Limited ABN 20 101 692 040. ^See website for full terms and conditions. Pricing and finance<br />
expires 1st September 2020. Pricing available while stocks last. ˚24 months 1500 hours = Full Warranty. 48 months 2000 hours = Powertrain Warranty
YOUR MOST<br />
DEPENDABLE<br />
WORKER.<br />
MF GLOBAL SERIES<br />
MF 4700, MF 5700 AND MF 6700 | 74 –132 HP<br />
Take advantage of the Government’s Instant Asset Write-Off incentive* and get it done with a super versatile Massey Ferguson<br />
Global Series tractor. These range of tractors are purpose built in the latest state-of-the-art facilities, combining the very best of<br />
today’s technologies with comfort, simplicity, reliability and quality. With up to 5,200 kg 3-point lift capacity, reliable AGCO Power<br />
engines and high capacity hydraulics with up to 98 l/min flow, now is the time to secure your new MF Global Series tractor and<br />
one dependable workhorse.<br />
* Check your business eligibility for the Australian Government Instant Asset Write-Off for purchases made before 31 December 2020. Eligible businesses may be able to claim the<br />
Instant Asset Write-Off for eligible assets acquired under the $150,000 threshold.<br />
207504 MF_<strong>Farm</strong><br />
MASSEYFERGUSON.COM.AU | FREECALL 1800 802 914<br />
A world of experience. Working with you.