Food-Processing-Plant-Design-layout

Recommendations

Info

Food Processing Plant Design & layout3. Cracking and scaling: This happens when paint becomes too brittle as it ages andthen it begins to break. The wood expands and contracts due to moisture absorptionwhich may break the film of colour. However, in the long run, the elasticity of thepaint decreases. In order to overcome this, more elastic paints of higher grade shouldbe used. In order to repaint the surface, first the old paint should be removed. Thiscan be done by scrapping, using a sand paper or a wire brush, blow torch andscrapper or by using chemical solvents. (liquid paint removal).4. Running and sagging: Use of too much oil results in sagging down and applyingtoo much thick coat also results in sagging. Application of paint to very glossy asurface would also result in sagging. It is necessary to maintain proper viscosity andsurface finish of the surface to be painted.5. Wrinkling: Formation of wrinkles is due to improper drying of paints applied on thesurface. This happens when surface dries quickly leaving undried paint below.www.AgriMoon.com128
******☺******This Book Download From e-course of ICARVisit for Other Agriculture books, News,Recruitment, Information, and Events atwww.agrimoon.comGive FeedBack & Suggestion at info@agrimoon.comSend a Massage for daily Update of Agriculture on WhatsApp+91-7900 900 676Disclaimer:The information on this website does not warrant or assume any legalliability or responsibility for the accuracy, completeness or usefulness of thecourseware contents.The contents are provided free for noncommercial purpose such as teaching,training, research, extension and self learning.Connect With Us:******☺******
Page 1 and 2:
Food Processing PlantDesign & Layou
Page 3 and 4:
IndexLessonPage NoModule- 1. Introd
Page 5 and 6:
Food Processing Plant Design & layo
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78: Food Processing Plant Design & layo
Page 127: Food Processing Plant Design & layo
show all

Food-Processing-Plant-Design-layout

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?