You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
After a little rethink on my mould release method the second one was much better. The<br />
moulds were then reinforced with MDF ribs and additional resin and glass.<br />
The next step was to prepare the moulds to make the new wings. This involved a lot <strong>of</strong><br />
sanding with fine wet-dry paper, then polishing and finishing with wax and PVA. I was<br />
then ready to lay up the new wings.<br />
This involved painting gel coat into<br />
the moulds and then laying up a first<br />
coat <strong>of</strong> tissue then layers <strong>of</strong> glass mat<br />
and resin. This was then left for a day<br />
to cure. The final job was to release<br />
the new wings from the moulds and<br />
final finishing.<br />
CTPG member Idris Dibble, is better<br />
known for being the handsome<br />
driving instructor at Cardiff Bus.<br />
19