Quickstart â BACS Installation Safety instructions - Generex GmbH

More documents

Recommendations

Info

Optional REV 3 : You can order an external temperature sensor for the REV 3. This one will be mounted as the REV 2 as follows. REV 2 : This type of C Module hat its temperature sensor on a 10cm cable which has to be placed on the battery surface. Detach the foil at the temperature sensor and place the sensor nearby the housing of the accumulator (not on cooling fins nor closing plugs). Please note, that the surface is clean to assure an accurate attachment of the sensor. Note: Never mix different BACS C modules ! Eg. REV 2 must not be used with REV 3 on the same battery system. The supply and measuring cable connected to a BACS C module BACS C module fixed with velcro strip on a accumulator Figure 3: Assembling and Connection of the Module All modules should be connected together via the BACS RJ10 bus-cables (Part No. B2BCRJ10xxx) using the 2 sockets at the back of the BACS module. Connect with these bus-cables all the modules in series (any socket of the BACS module can be used, it does not matter if left or right socket). The last cable has to be connected to the BACS BUS CONVERTER or to the BACS WEBMANAGER Input. It is not required to built up a ring, so the last BACS module may be connected only with one cable. Copyright of the European Union is effecti ve (Copyright EU) (c) 2012 GENEREX Systems GmbH, H amburg, Ger many, All rights reserved TEL +49( 40)22692910 - EMAIL gener ex@generex.de - WEB www.generex.de (This and all other product datasheets ar e available for downl oad.)
BACS Bus cable Figure 4: BACS bus cables (Part No. B2BCRJ10xx) connected to a BACS CONVERTER BACS Bus cable Figure 5: BACS bus cables connected to a BACS WEBMANAGER BUDGET II internal CONVERTER BACS Bus cable Figure 6: BACS bus cables connected to a BACS WEBMANAGER BUDGET Slot version - For usage with UPS, Inverters, Rectifiers, Chargers or other devices with such a compatible slot type Copyright of the European Union is effecti ve (Copyright EU) (c) 2012 GENEREX Systems GmbH, H amburg, Ger many, All rights reserved TEL +49( 40)22692910 - EMAIL gener ex@generex.de - WEB www.generex.de (This and all other product datasheets ar e available for downl oad.)
Page 1 and 2: Quickstart - BACS Installation Safe
Page 3 and 4: Exact observation of the battery te
Page 5: Connection of a BC5 measuring cable
Page 9 and 10: Figure 9: BACS WEBMANAGER BUDGET II
Page 11 and 12: 9 MUTE Button Button for the acknow
Page 13 and 14: Note: The internal web-server takes
Page 15 and 16: Figure 15: Enter Number of Batterie
Page 17 and 18: Do not forget! After your address w
Page 19: The colours got the following meani

Quickstart â BACS Installation Safety instructions - Generex GmbH

Create successful ePaper yourself

Delete template?

Save as template?

Quickstart â BACS Installation Safety instructions - Generex GmbH