Quickstart – BACS Installation Safety instructions - Generex GmbH

The colours got the following meaning:
19
- Green: BACC module initialized = status okay
- Red: BACS module not reachable
- Grey: BACS module not polled/initialized yet
If BACS has initialized allmodules, you will see the BACS status page, with Voltage and Temperature
of the batteries, Equalisation power and the status LED. After 15 minutes the first measuring results of
the impedance is made. Please wait until the first RI measuring is visible before you continue with
chapter 4.3 “BACS Module & Alarm Threshold Setting”, which is part of the BACS user manual.
End of the BACS QUICKSTART.
Figure 22: Web-browser BACS Status Page (64 Modules)
For further configuration description and complete information how to use the
BACS system, please use the complete BACS user manual and its FAQs, found
on the CD ROM of this BACS Kit or ad download from the GENEREX Website.
The BACS Programmer Software is a Windows Software, which uses all available functions of the
BACS Webmanager for the programming of the BACS modules. If you want to pre-address the BACS
modules prior of the installation at customer site, you can use this software and a BACS BUS
CONVERTER 3.
Follow this link to get the BACS Programmer Software:
BACS Utilities
Copyright of the European Union is effecti ve (Copyright EU) (c) 2010 GENEREX GmbH, Hamburg, Germany, All rights reserved
TEL +49( 40)22692910 - EMAIL info@generex.de - WEB www.generex.de (This and all other product datasheets ar e available for downl oad.)