Quickstart – BACS Installation Safety instructions - Generex GmbH

Figure 15: Enter Number of Batteries
E.g. If you got 64 batteries in 2 strings, please enter 64 into the area “Number of batteries” and 2 into
“Number of strings”.
After having entered the number of battery strings, you may define how the battery is shown in the BACS
web-interface BACS STATUS screen. If you tick the box “List module numbers string wise”, the BACS
STATUS screen will list the address number of the batteries string wise, e.g. At 2 Strings with total 64
batteries you will see at string 1 the addresses 1-32 and at string 2 the addresses 1-32.
Figure 16: BACS Feature “List module numbers string wise”
If you have enabled the feature “List modules numbers stringwise”, the BACS log file will identify the
batteries per string with a text prefix like: “4S2” which means “module 4, string 2”. This makes the
identification of the BACS module with an alarm easier for you. The following figure shows the alarm log file
of a BACS Webmanager where a temperature alarm was present on several modules, here identified with
their string number.
Figure 17: Alarm Logfile with temperature alarm on BACS modules with string numbers
Copyright of the European Union is effecti ve (Copyright EU) (c) 2012 GENEREX Systems GmbH, H amburg, Ger many, All rights reserved
TEL +49( 40)22692910 - EMAIL gener ex@generex.de - WEB www.generex.de (This and all other product datasheets ar e available for downl oad.)