Quickstart â BACS Installation Safety instructions - Generex GmbH
Quickstart â BACS Installation Safety instructions - Generex GmbH
Quickstart â BACS Installation Safety instructions - Generex GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9 MUTE Button Button for the acknow ledgement and mute of the horn. Alarm LED changes to yellow .<br />
10 <strong>BACS</strong> Bus For the connection to the <strong>BACS</strong> C modules.<br />
<strong>BACS</strong> ® WEBMANAGER BUDGET LED Status<br />
Operating Conditions of <strong>BACS</strong> Webmanager LEDs LED-Signaling<br />
Start procedure 1, up loading of the OS red flashing<br />
Start procedure 2, reboot of the OS red long on<br />
If the red and green LED shine at your <strong>BACS</strong> Webmanager during the reboot, large broadcast traffic is present on<br />
your network „receive buffer overflow“. The green LED is signalizing at the reboot, that the „traffic buffer“ is full.<br />
Advice: You should filter broadcasts via your sw itch, because it comes to performance losing of the <strong>BACS</strong><br />
Webmanager unnecessary.<br />
Copyright of the European Union is effecti ve (Copyright EU) (c) 2012 GENEREX Systems <strong>GmbH</strong>, H amburg, Ger many, All rights reserved<br />
TEL +49( 40)22692910 - EMAIL gener ex@generex.de - WEB www.generex.de (This and all other product datasheets ar e available for downl oad.)<br />
red AND green<br />
during reboot<br />
Normal condition green flashing<br />
UPS communication lost red constantly<br />
2.1 Setup and Network Configuration of the <strong>BACS</strong> WEBMANAGER<br />
Note: We recommend the following settings for the operation of the CS121 via cross cable<br />
(Ethernet cable for the connection directly). Set the IP address of the PC with a cross cable to an IP address<br />
of the same network segment, e.g. 10.10.10.11 AND set the gate way to 0.0.0.0.<br />
2.1.1 <strong>Installation</strong>/Network-Integration of the <strong>BACS</strong> ® WEBMANAGER<br />
Connect the power supply to the <strong>BACS</strong> WEBMANAGER BUDGET and connect a network cable to your<br />
Network switch or to your PC/workstation network card (cross cable required).<br />
A network cross cable is a PC-PC network cable which does not require a switch or a hub between 2<br />
network computers (2). Most modern computers networkcards have an autodetection, so any network cable<br />
may be used. Only if you do not have such a cable autodetection its unavoidable to use a Cross-cable or<br />
connect a switch or Hub between your PC and the <strong>BACS</strong> WEBMANAGER (1).<br />
(1) Connection PC-Switch/Hub and CS121 (2) Connection PC-Cross Cable/Network Cable and CS121
Change language