Canon.com/ijsetup - Canon printer setup

Canon.Com/ijsetup - Canon Ij Setup : Canon/Ij
Setup
Canon Printers are one among the simplest printers within the industry. The highly
versatile beat one printer has features that make them stand out among others. Cloudready
printers of Canon hook up with cloud storage and print files efficiently. Connect
with everything possible like Bluetooth, USB, and cloud after getting completed with
Canon.Com/ijSetup. Let’s Read Canon/Ij Setup blog for a straightforward Printer
Setup.
Before trying to attach your printer wirelessly, you would like to make sure about the
below requirements
You need to possess an access point router, hub or WI-Fi- Modem. Access Point
should be fully functional and must have an online connection.
Secondly, you ought to have a computer that's connected to the web. You’ll open the
Canon/ij Setup to make sure your computer is connected to the web. If the web site
doesn't open up, this suggests your computer isn't connected to the web.
Follow the instructions in Ij.Start.Canon to Connect Printer to network
1. Some access points have inbuilt the feature of the automatic connection button labeled
"WPS".
2. Canon Printer can hook up with your network quickly and simply without the
necessity to enter a password.
Make sure the WPS Connection was Connect of WPS button to proceed with WPS
Connection method for Canon ij Setup the
Ensure that printer was turned on for proceeding with Canon ij SetupNow press and
hold the Wi-Fi button present on top of the printer till the alarm lamp flashes once.
Ensure that the lamp next to the present button starts flashing blue. After it flashes
blue, attend your access point and press the WPS button within 2 minutes.
Wi-Fi lamp on the printer will still flash blue while looking high and low, and
therefore the power and Wi-Fi lamp will flash when connecting to the access point.
The Power and Wi-Fi lamp will stop flashing and remain lit when the printer has
successfully made a connection to your wireless network.
Network Setting Confirmation
To ensure that the printer has successfully established a connection to your Canon
Wireless Printer Setup. Canon/ij Setup lists no of steps below to make sure an
equivalent
Make sure to show on the printer.
Now load A4 sheet or letter-size plain paper.

After that press and hold the Resume/Cancel button till the alarm lamp flashes 15
times.
Release the button after it's done flashing 15 times.
A network information page will print.
Just check whether the “Connection” indicates “Active” which the SSID – Service Set
indicates the right name of your wireless network within the printout.
You are through with Canon ij Setup via the WPS Connection method. Now you'll
proceed with installing the software. If you are doing not have an installation CD
you'll attend the Canon support page to put in an equivalent.
Original Resource: http://customer-helpdesk.mystrikingly.com/blog/canon-comijsetup-canon-ij-setup-canon-ij-setup