Catalog March 2020

GELMOMENT GEL POLISH
To remove the gel polish, simply use your choice of
GelMoment Flake Off Remover or GelMoment Remover Pads.
Removal Steps with flake off remover
1. Gently buff off the surface, to allow the Flake Off Remover solution to work
more effectively.
2. Apply a thick layer of Flake Off Remover over Gel Polish, avoiding the skin.
3. Let the product sit for 3 to 5 minutes. Multiple coats of polish or any top coats
added may require additional time.
4. Remove residue with GelMoment Cuticle Pusher.
5. Flake Off will remove at least the first coat of polish, but if you are wearing
multiple coats you may wish to add more Flake Off Remover to any of the polish
that remains, and repeat the above process until all polish is removed.
6. If you are ready for your next manicure, apply your favourite Gel Polish,
following the recommended application instructions.
PRO TIP: to improve nail health, nourish your nails and cuticles between manicures with our
NailSpa products.
Removal Steps with REMOVER PADS
1. Tear across the dotted line and place your nail inside the pouch, underneath the
moist pad.
2. Remove the protective plastic strip on the outside of the pouch to reveal the
sticky tape below. This allows you to tightly wrap the pouch around your nail.
3. Leave inside for 5 to 10 minutes (depending on your nail type) and remove.
4. Use the GelMoment Cuticle Pusher to eliminate remaining residue.
5. If you are ready for your next manicure, apply your favourite Gel Polish, following
the recommended application instructions.
NOTE: For best results, use the Remover Pads in conjunction with our GelMoment Remover
Clips, an accessory that enhances the removal process.
33