User´s Manual - I+ME ACTIA GmbH

Frame
CAT allows the user to edit or remove already existing Frames from the ECU's. The user can also
create new Frames using CAT.
The Frame List Configuration window that is used is also used to choose the received frames that shall
be displayed in the Frame List View . (See also Frame List .)
New Frame
Choose menu item Configurations | Frame List from the main window to open the Frame List
Configuration ... window shown above. Choose the ECU in which you want to create the new frame.
Then click on Create to build a new Frame.
The Frame Definition ... window will appear (see below). Input any Frame Name up to 12 characters.
Choose standard (STD 11bit Identifier) or extended (XTD 29bit Identifier) format and put in the
Identifier (ID) as hex value. The user may define the frame as an RTR frame or enter the default values
for the Number of Data Bytes and for the assigned hex values. Click on OK to acknowledge the input.
Edit Frame
Choose menu item Configurations | Frame List from the main window to open the Frame List
Configuration ... window shown above. Choose the assigned ECU and then the Frame to be edited
from the Frame List. Then click on Edit to change the definition of the Frame.
The Frame Definition ... window will appear (see below). Input any Frame Name up to 12 characters.
Choose standard (STD 11bit Identifier) or extended (XTD 29bit Identifier) format and input the
Identifier (ID) as a hex value. The user may define the frame as an RTR frame or enter the default
values for the Number of Data Bytes and for the assigned hex values. Click on OK to acknowledge the
input.
Remove Frame
Choose menu item Configurations | Frame List from the main window to open the Frame List
Configuration ... window shown above. Choose the assigned ECU and then the Frame to be removed
from the Frame List. Click on Remove to erase the Frame.
The user will be warned before the Frame is removed and asked if he/she really wants to remove it.
80